[SOLVED]Start Drag from GeUserArea

Helper

On 07/06/2017 at 03:19, xxxxxxxx wrote:

Gonna do some test but I guess I can mark the thread as solved.

Thanks you alot.

Helper

On 07/06/2017 at 13:57, xxxxxxxx wrote:

I don't success to get it to work properly. The main issue is I don't know when to start drag event. Same for end it. So for exemple it didn't make the difference beetween a simple click and a drag event.

Moreover kills event doesn't seem to work.
Here is an exemple

import c4d
  
class Area(c4d.gui.GeUserArea) :
  
    xValue = 0
    yValue = 0
   
    def DrawMsg(self, x1, y1, x2, y2, msg) : 
  
        self.DrawSetPen(c4d.Vector(.2))
        self.DrawRectangle(x1, y1, x2, y2)
        
        
    def drag_message(self, msg, result) :
        bc_click = c4d.BaseContainer()
        self.GetInputState(c4d.BFM_INPUT_MOUSE, c4d.BFM_INPUT_MOUSELEFT, bc_click)
        mousex = bc_click.GetLong(c4d.BFM_INPUT_X)
        mousey = bc_click.GetLong(c4d.BFM_INPUT_X)
  
        self.MouseDragStart(c4d.KEY_MLEFT, mousex, mousey, c4d.MOUSEDRAGFLAGS_DONTHIDEMOUSE | c4d.MOUSEDRAGFLAGS_NOMOVE)
    
        mx = mousex
        my = mousey
        drag_result, dx, dy, channels = self.MouseDrag()
        first = True
        drag = False
        while drag_result == c4d.MOUSEDRAGRESULT_CONTINUE:
            drag = True
            if first:
                print 'Start'
                first = False
            mx += dx
            my += dy
            if dx==0.0 and dy==0.0:
                drag_result, dx, dy, channels = self.MouseDrag()
                continue
            self.KillEvents() #Don't work
  
            drag_result, dx, dy, channel = self.MouseDrag()
            print "Mouse Dragging at position [%f,%f]" % (mx, my)
  
        if self.MouseDragEnd() == c4d.MOUSEDRAGRESULT_FINISHED and drag:
            print "Mouse Dragging Ended: ", self.MouseDragEnd()
  
        return
        
    def Message(self, msg, result) :
        self.drag_message(msg, result)
        if msg.GetId() == c4d.BFM_INPUT:
            print 'clicked'
        return c4d.gui.GeUserArea.Message(self, msg, result)
        
  
class MyDialog(c4d.gui.GeDialog) :
  
    def __init__(self, area) :
        self.area = area
  
    def CreateLayout(self) :
        self.SetTitle("My UserArea")
  
        self.AddUserArea(1000, c4d.BFH_SCALEFIT|c4d.BFV_SCALEFIT)
        self.AttachUserArea(self.area, 1000)
        self.GroupEnd()
        return True
  
def main() :
    area = Area()
    dialog = None
  
    dialog = MyDialog(area)
    dialog.Open(dlgtype=c4d.DLG_TYPE_MODAL_RESIZEABLE, defaultw=500, defaulth=500)
  
if __name__=='__main__':
    main()

As you could see if you click its also print you drag. Hope you understand my problem ^^'. Who is Get the start of a drag event and get the end of a drag event. Like that in the Message function I can do if START_OF_DRAG : self.drag_message, and if END_OF_DRAG : print 'end'

Helper

On 08/06/2017 at 03:25, xxxxxxxx wrote:

To check for a drag event the solution is to simply use MouseDragStart()/MouseDrag()/MouseDragEnd().
Instead of Message(), move the mouse dragging into InputEvent().
Then to check if the started drag processing was just a click add this condition at the beginning of the while dragging loop:

if bc_click[c4d.BFM_INPUT_VALUE] == 0:
    break

This condition exits the loop whenever the mouse left button is released. Then check if the mouse was really moved or if it was just a mouse click.

Finally, I don't think KillEvents() is useful here if it's called inside the while dragging loop.

Helper

On 08/06/2017 at 04:40, xxxxxxxx wrote:

Thanks you sadly I didnt succes to get the click evaluated properly.

import c4d
  
class Area(c4d.gui.GeUserArea) :
  
    def DrawMsg(self, x1, y1, x2, y2, msg) : 
        self.DrawSetPen(c4d.Vector(.2))
        self.DrawRectangle(x1, y1, x2, y2)
        
        
    def InputEvent(self, msg) :
        mousex = msg[c4d.BFM_INPUT_X]
        mousey = msg[c4d.BFM_INPUT_Y]
        
        self.MouseDragStart(c4d.KEY_MLEFT, mousex, mousey, c4d.MOUSEDRAGFLAGS_DONTHIDEMOUSE | c4d.MOUSEDRAGFLAGS_NOMOVE)
        
        mx = mousex
        my = mousey
        while True:
            if msg[c4d.BFM_INPUT_VALUE] == 0:
                break
            
            result, dx, dy, channels = self.MouseDrag()
            if result!=c4d.MOUSEDRAGRESULT_CONTINUE: break
            
            #If we don't move that mean we clicked'
            if not dx or not dy:
                print 'clicked'
            else:
                mx += dx
                my += dy
                
                print "Mouse Dragging at position [%f,%f]" % (mx, my)
            
  
        
        end_state = self.MouseDragEnd()
        if end_state == c4d.MOUSEDRAGRESULT_ESCAPE:
            print "Escaped"
        elif end_state == c4d.MOUSEDRAGRESULT_FINISHED:
            print 'Mouse Drag End'             
        
            
        return True        
  
class MyDialog(c4d.gui.GeDialog) :
    def CreateLayout(self) :
        self.area = Area()
        
        self.AddUserArea(1000, c4d.BFH_SCALEFIT|c4d.BFV_SCALEFIT)
        self.AttachUserArea(self.area, 1000)
        return True
  
def main() :
    dialog = MyDialog()
    dialog.Open(dlgtype=c4d.DLG_TYPE_MODAL_RESIZEABLE, defaultw=500, defaulth=500)
  
if __name__=='__main__':
    main()

As you could see, the first tick is always drag (dx and dy are not equal to 0) even if you don't move the mouse.

Moreover I would like to ask is there a way for changing mouse icon? For exemple I would like to change it when she is outside of my GeUserArea.

Helper

On 08/06/2017 at 08:14, xxxxxxxx wrote:

Sorry my first post was missing information.
MouseDrag() has to be called first in the loop for each drag event. Then the current input state for the mouse left button has to be retrieved before checking c4d.BFM_INPUT_VALUE.
So the dragging loop would be:

mx = mousex
my = mousey
state = c4d.BaseContainer()
while True:
  
    result, dx, dy, channels = self.MouseDrag()
    if result == c4d.MOUSEDRAGRESULT_ESCAPE:
      break
  
    if not self.GetInputState(c4d.BFM_INPUT_MOUSE, c4d.BFM_INPUT_MOUSELEFT, state) :
        break
  
    if state[c4d.BFM_INPUT_VALUE] == 0:
        print "Released Left Mouse"
        break
  
    if dx == 0 and dy == 0:
        continue
  
    mx += dx
    my += dy
    print "Mouse Dragging at position [%f,%f]" % (mx, my)

state[c4d.BFM_INPUT_VALUE] gives the mouse left button clicked state. So this allows to check when the mouse button has been released.
If the mouse position hasn't changed then no dragging should be processed.

You can change the mouse icon with gui.SetMousePointer().

Helper

On 08/06/2017 at 09:38, xxxxxxxx wrote:

Thanks you. Tested and solved !

Helper

On 09/06/2017 at 00:54, xxxxxxxx wrote:

Sorry to bump this thread but is there a way for start drag from a GeUserArea and recieve drop message from TreeViewCustomGui? Or at least is it possible to send message to this TreeViewCustomGui? Or a timer?
Just tell me yes or no

Cause I think I must do the following thing but I prefer ask if there is no other way before ^^
Make my timer function into my GeDialog who call a custom timer function inside my TreeView

Helper

On 09/06/2017 at 02:29, xxxxxxxx wrote:

GeUserArea.HandleMouseDrag() is missing in the Python API so it would be really difficult and hacky to send drag and drop data to other gadgets.

Helper

On 09/06/2017 at 02:46, xxxxxxxx wrote:

Ok thanks for confirming !

Helper

On 09/06/2017 at 13:53, xxxxxxxx wrote:

Sorry again to bump this thread, but I don't udnerstand the output code while the mouse is not moving, delta y is always -22 while it should be 0

    def InputEvent(self, msg) :
        mousex = msg[c4d.BFM_INPUT_X]
        mousey = msg[c4d.BFM_INPUT_Y]
  
        self.MouseDragStart(c4d.KEY_MLEFT, mousex, mousey, c4d.MOUSEDRAGFLAGS_DONTHIDEMOUSE | c4d.MOUSEDRAGFLAGS_NOMOVE)
  
        start_x = mousex
        start_y = mousey
  
        mx = mousex
        my = mousey
        state = c4d.BaseContainer()
        while True:
  
            result, dx, dy, channels = self.MouseDrag()
            if result == c4d.MOUSEDRAGRESULT_ESCAPE:
                break
  
            if not self.GetInputState(c4d.BFM_INPUT_MOUSE, c4d.BFM_INPUT_MOUSELEFT, state) :
                break
  
            if state[c4d.BFM_INPUT_VALUE] == 0:
                print "Released Left Mouse"
                break
  
            if dx == 0 and dy == 0: #dy != 0 while not moving
                continue
  
            mx += dx
            my += dy
  
           #Should not be display if not moving
           print 'drag'
  
        print start_x - mx
        print start_y - my #-22 if not moving
  
        return True

Helper

On 12/06/2017 at 07:06, xxxxxxxx wrote:

Originally posted by xxxxxxxx

Sorry again to bump this thread, but I don't understand the output code while the mouse is not moving, delta y is always -22 while it should be 0

If the mouse doesn't move dx and dy are 0. The final mouse delta X and Y values depends on how you calculate the current mouse position.
It's better to subtract the mouse drag delta values:

mx -= dx
my -= dy

Then the final delta value can be calculated:
print mx - mousex
print my - mousey

If you don't want MouseDrag() to return when the mouse doesn't move, don't pass MOUSEDRAGFLAGS_NOMOVE to MouseDragStart().

Helper

On 13/06/2017 at 04:52, xxxxxxxx wrote:

Ok I get why it's wrong... The corect loop initialization is:

        mousex = msg[c4d.BFM_INPUT_X]
        mousey = msg[c4d.BFM_INPUT_Y]
        
        self.MouseDragStart(c4d.KEY_MLEFT, mousex, mousey, c4d.MOUSEDRAGFLAGS_DONTHIDEMOUSE | c4d.MOUSEDRAGFLAGS_NOMOVE)
        
        while self.MouseDrag()[0] == c4d.MOUSEDRAGRESULT_CONTINUE:
            if msg[c4d.BFM_INPUT_VALUE] == 0:
                break
            
            result, dx, dy, channels = self.MouseDrag()
            print "dx {} - dy {}".format(dx, dy)

While in the documention of https://developers.maxon.net/docs/py/2023_2/modules/c4d.gui/EditorWindow/index.html#EditorWindow.MouseDragStart the main drag loop is done with While true, which give you a wrong value for dx/dy for the first packet of the drag input.

So doing it like in the C++ exemple

    win->MouseDragStart(button, mouseX, mouseY, MOUSEDRAGFLAGS_DONTHIDEMOUSE | MOUSEDRAGFLAGS_NOMOVE);
    while (win->MouseDrag(&dx, &dy, &device) == MOUSEDRAGRESULT_CONTINUE)

give us in python

        self.MouseDragStart(c4d.KEY_MLEFT, mousex, mousey, c4d.MOUSEDRAGFLAGS_DONTHIDEMOUSE | c4d.MOUSEDRAGFLAGS_NOMOVE)
        
        while self.MouseDrag()[0] == c4d.MOUSEDRAGRESULT_CONTINUE:

Anyway thanks for your support !

Helper

On 13/06/2017 at 08:18, xxxxxxxx wrote:

I can't confirm that because the delta values returned from the call to MouseDrag()[0] aren't processed for each while loop:

while self.MouseDrag()[0] == c4d.MOUSEDRAGRESULT_CONTINUE: # dx, dy and channels not retrieved and processed

There should be only one MouseDrag() call for each while loop.

Helper

On 13/06/2017 at 08:28, xxxxxxxx wrote:

Juste copy paste thoses two codes and do a normal click without dragging. Just a simple click (no move, nothing just a click), So result should be 0 and 0 for dx/dy in all case (in all packet of the drag pool)
The first one give correct result for dx , dy

import c4d
  
class Area(c4d.gui.GeUserArea) :
  
    def InputEvent(self, msg) :
        mousex = msg[c4d.BFM_INPUT_X]
        mousey = msg[c4d.BFM_INPUT_Y]
        
        self.MouseDragStart(c4d.KEY_MLEFT, mousex, mousey, c4d.MOUSEDRAGFLAGS_DONTHIDEMOUSE | c4d.MOUSEDRAGFLAGS_NOMOVE)
        
        while self.MouseDrag()[0]:
            if msg[c4d.BFM_INPUT_VALUE] == 0:
                break
            
            result, dx, dy, channels = self.MouseDrag()
            if result!=c4d.MOUSEDRAGRESULT_CONTINUE: break
            
            print "dx {} - dy {}".format(dx, dy)
                        
        return True
  
class MyDialog(c4d.gui.GeDialog) :
    def CreateLayout(self) :
        self.area = Area()
        
        self.AddUserArea(1000, c4d.BFH_SCALEFIT|c4d.BFV_SCALEFIT)
        self.AttachUserArea(self.area, 1000)
        return True
  
def main() :
    dialog = MyDialog()
    dialog.Open(dlgtype=c4d.DLG_TYPE_MODAL_RESIZEABLE, defaultw=500, defaulth=500)
  
if __name__=='__main__':
    main()

While the sdk code(using While True) give wrong result for dx, dy in the first packet (dx 4 and dy 4)

import c4d
  
class Area(c4d.gui.GeUserArea) :
  
    def InputEvent(self, msg) :
        mousex = msg[c4d.BFM_INPUT_X]
        mousey = msg[c4d.BFM_INPUT_Y]
        
        self.MouseDragStart(c4d.KEY_MLEFT, mousex, mousey, c4d.MOUSEDRAGFLAGS_DONTHIDEMOUSE | c4d.MOUSEDRAGFLAGS_NOMOVE)
        
        while True:
            if msg[c4d.BFM_INPUT_VALUE] == 0:
                break
            
            result, dx, dy, channels = self.MouseDrag()
            if result!=c4d.MOUSEDRAGRESULT_CONTINUE: break
            
            print "dx {} - dy {}".format(dx, dy)
                        
        return True
  
class MyDialog(c4d.gui.GeDialog) :
    def CreateLayout(self) :
        self.area = Area()
        
        self.AddUserArea(1000, c4d.BFH_SCALEFIT|c4d.BFV_SCALEFIT)
        self.AttachUserArea(self.area, 1000)
        return True
  
def main() :
    dialog = MyDialog()
    dialog.Open(dlgtype=c4d.DLG_TYPE_MODAL_RESIZEABLE, defaultw=500, defaulth=500)
  
if __name__=='__main__':
    main()

Helper

On 14/06/2017 at 03:17, xxxxxxxx wrote:

You're not retrieving and printing the delta values dx and dy from the self.MouseDrag()[0] calls in the first script. The delta values are 4.0 for the first mouse drag there too.

The limitation with MouseDrag() in Python is the language doesn't support assignments in expressions.