Noise Functions

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:04, xxxxxxxx wrote:

hmm. still getting some pretty funky results.. could it be because I am looping through all of the points and effecting each individual point? is it possible to compare the result of a variable in one cycle of a loop to the result in the last cycle of a loop?

~Shawn

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:13, xxxxxxxx wrote:

I assume I'll need a global variable for that.. do you think it would be more effective to catch the location of the last point that was modified in the global variable and use that to adjust the position of the next point. make the mix function mix the distance between the last point and the current point?

something like that?

~Shawn

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:14, xxxxxxxx wrote:

you could try to use some smaller value for the noise functions. for example point _/100.. and see what happens. i'd use a slider for this value than, too...

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:21, xxxxxxxx wrote:

ha, you are just too fast for my replies. however, i wouldnt care for that.. you have your base form and apply just some values to each point, so the form still stays similar to your original mesh. maybe you dont use a cube as a base, but a sphere with low polycount? maybe you apply some scale vector additionally so the object doesnt look so round anymore

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:22, xxxxxxxx wrote:

well smaller numbers definitely help but still don't quite give me what I'm looking for. I think I might need to compare the current point position with the last point position.. Maybe.,. LOL

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:23, xxxxxxxx wrote:

lol... sorry I replied before you had a chance to again. HAHA

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:30, xxxxxxxx wrote:

if you use Mix with keeping more to your original point, say values between 0.5 and 1 for t, you should be able to get exactly that (in theory of course, since i'm not actually trying atm)

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:37, xxxxxxxx wrote:

LOL.. yep you're right... it worked/./ just had to do a little tweaking with the numbers.. Thanks a lot for your help ello. I really appreciate you taking the time to help me.

~Shawn

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:39, xxxxxxxx wrote:

glad i am able sometimes

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:45, xxxxxxxx wrote:

Hey while you're here do you know if it is safe to subdivide an object from within the GetVirtualObjects() method?

~Shawn

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:53, xxxxxxxx wrote:

i place my object inside a hypernurbs (Osds) to do so, but i think you mean something other. it should be able by using CommandData

here is a snippet of how i used the optimize command on a polygon object.

  
      if (op->GetType()==Opolygon)  
      {  
          ModelingCommandData cd;  
          cd.doc = doc;  
          cd.op = op;  
          BaseContainer bc;  
          bc.SetReal(MDATA_OPTIMIZE_TOLERANCE, tolerance);  
          bc.SetReal(MDATA_OPTIMIZE_POINTS, TRUE);  
          bc.SetReal(MDATA_OPTIMIZE_POLYGONS, TRUE);  
          bc.SetReal(MDATA_OPTIMIZE_UNUSEDPOINTS, TRUE);  
          cd.bc = &bc;  
          if(SendModelingCommand(MCOMMAND_OPTIMIZE, cd))  
          {  
              cd.op->Message(MSG_UPDATE, NULL);  
              BaseTag *phongTag = op->MakeTag(Tphong);  
              BaseContainer *bc = phongTag->GetDataInstance();  
              bc->SetBool(PHONGTAG_PHONG_ANGLELIMIT,TRUE);  
              bc->SetReal(PHONGTAG_PHONG_ANGLE,ToRad(winkel));  
          } else {  
               GePrint("failed");  
          }  
      }

hope this makes sense

edit: in your case it'd be the MCOMMAND_SUBDIVIDE .. check the sdk for its parameters...

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:59, xxxxxxxx wrote:

I was doing something simliar with

MCOMMAND_SUBDIVIDE_<_h4_>_

but for some reason it keeps crashiung on me when I try to do it.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:01, xxxxxxxx wrote:

hm.. did you set the parameters? i guess its some trial and error now, since i dont know why it crashes.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:03, xxxxxxxx wrote:

this is how I am attempting to subdivide

but it keeps crashing

  
		if (mdat.bc->GetBool(HYPERNURBS_SUBDIVISION, TRUE))  //If HyperNURBS is checked
		{
		mdat.bc->SetBool(MDATA_SUBDIVIDE_HYPER, TRUE);
		}
		else
		{
		mdat.bc->SetBool(MDATA_SUBDIVIDE_HYPER, FALSE);
		}
		mdat.bc->SetLong(MDATA_SUBDIVIDE_SUB, subAmount);
	    mdat.bc->SetReal(MDATA_SUBDIVIDE_ANGLE, mdat.bc->GetReal(MAX_ANGLE));
		
	//Subdivision Command
	SendModelingCommand(MCOMMAND_SUBDIVIDE, mdat);

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:04, xxxxxxxx wrote:

MAX_ANGLE is equal to pi and subAMount is a real that the user can adjust.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:11, xxxxxxxx wrote:

try catching the crash with

if(SendModelingCommand(MCOMMAND_SUBDIVIDE, mdat))
{
GePrint("done");
}
else
{
GePrint("failed");
}

just to be on the safe side..

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:44, xxxxxxxx wrote:

Here's my subdivision code now...

Still crashing.

//SUBDIVISION
  
		Real subAmount;
		subAmount = mcd2.bc->GetLong(SPACEROCK_SUBDIVISIONS);
		mcd2.mode = MODIFY_ALL;
		mcd2.doc = hh->GetDocument();
  
		if(SendModelingCommand(MCOMMAND_SUBDIVIDE, mcd2))
		{
			GePrint("done");
			mcd2.bc->SetBool(MDATA_SUBDIVIDE_HYPER, TRUE);
			mcd2.bc->SetLong(MDATA_SUBDIVIDE_SUB, subAmount);
			mcd2.bc->SetReal(MDATA_SUBDIVIDE_ANGLE, pi);
			//Subdivision Command
			SendModelingCommand(MCOMMAND_SUBDIVIDE, mcd2);
		} 
		else
		{
			GePrint("failed");
		}

Any thoughts?

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:55, xxxxxxxx wrote:

hey, dont call SendModelingCommand twice.. its already called in the if condition!

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 14:06, xxxxxxxx wrote:

well.. that was a good thought and a good catch but unfortunately it's still crashing .. this one is a bit of a thorn today. LOL

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 14:14, xxxxxxxx wrote:

another thing could be worth a try, to set the Parameters for an extra BaseContainer like i did it in my example:

BaseContainer bc;
        bc.SetReal(MDATA_OPTIMIZE_TOLERANCE, tolerance);
        bc.SetReal(MDATA_OPTIMIZE_POINTS, TRUE);
        bc.SetReal(MDATA_OPTIMIZE_POLYGONS, TRUE);
        bc.SetReal(MDATA_OPTIMIZE_UNUSEDPOINTS, TRUE);
        cd.bc = &bc;

and in the if (SendModelingCommand... call "cd.op->Message(MSG_UPDATE, NULL);"

Oh, wait, i didnt see you setting mcd2.op to your object, maybe thats the main problem