Noise Functions

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:23, xxxxxxxx wrote:

lol... sorry I replied before you had a chance to again. HAHA

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:30, xxxxxxxx wrote:

if you use Mix with keeping more to your original point, say values between 0.5 and 1 for t, you should be able to get exactly that (in theory of course, since i'm not actually trying atm)

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:37, xxxxxxxx wrote:

LOL.. yep you're right... it worked/./ just had to do a little tweaking with the numbers.. Thanks a lot for your help ello. I really appreciate you taking the time to help me.

~Shawn

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:39, xxxxxxxx wrote:

glad i am able sometimes

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:45, xxxxxxxx wrote:

Hey while you're here do you know if it is safe to subdivide an object from within the GetVirtualObjects() method?

~Shawn

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:53, xxxxxxxx wrote:

i place my object inside a hypernurbs (Osds) to do so, but i think you mean something other. it should be able by using CommandData

here is a snippet of how i used the optimize command on a polygon object.

  
      if (op->GetType()==Opolygon)  
      {  
          ModelingCommandData cd;  
          cd.doc = doc;  
          cd.op = op;  
          BaseContainer bc;  
          bc.SetReal(MDATA_OPTIMIZE_TOLERANCE, tolerance);  
          bc.SetReal(MDATA_OPTIMIZE_POINTS, TRUE);  
          bc.SetReal(MDATA_OPTIMIZE_POLYGONS, TRUE);  
          bc.SetReal(MDATA_OPTIMIZE_UNUSEDPOINTS, TRUE);  
          cd.bc = &bc;  
          if(SendModelingCommand(MCOMMAND_OPTIMIZE, cd))  
          {  
              cd.op->Message(MSG_UPDATE, NULL);  
              BaseTag *phongTag = op->MakeTag(Tphong);  
              BaseContainer *bc = phongTag->GetDataInstance();  
              bc->SetBool(PHONGTAG_PHONG_ANGLELIMIT,TRUE);  
              bc->SetReal(PHONGTAG_PHONG_ANGLE,ToRad(winkel));  
          } else {  
               GePrint("failed");  
          }  
      }

hope this makes sense

edit: in your case it'd be the MCOMMAND_SUBDIVIDE .. check the sdk for its parameters...

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 12:59, xxxxxxxx wrote:

I was doing something simliar with

MCOMMAND_SUBDIVIDE_<_h4_>_

but for some reason it keeps crashiung on me when I try to do it.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:01, xxxxxxxx wrote:

hm.. did you set the parameters? i guess its some trial and error now, since i dont know why it crashes.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:03, xxxxxxxx wrote:

this is how I am attempting to subdivide

but it keeps crashing

  
		if (mdat.bc->GetBool(HYPERNURBS_SUBDIVISION, TRUE))  //If HyperNURBS is checked
		{
		mdat.bc->SetBool(MDATA_SUBDIVIDE_HYPER, TRUE);
		}
		else
		{
		mdat.bc->SetBool(MDATA_SUBDIVIDE_HYPER, FALSE);
		}
		mdat.bc->SetLong(MDATA_SUBDIVIDE_SUB, subAmount);
	    mdat.bc->SetReal(MDATA_SUBDIVIDE_ANGLE, mdat.bc->GetReal(MAX_ANGLE));
		
	//Subdivision Command
	SendModelingCommand(MCOMMAND_SUBDIVIDE, mdat);

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:04, xxxxxxxx wrote:

MAX_ANGLE is equal to pi and subAMount is a real that the user can adjust.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:11, xxxxxxxx wrote:

try catching the crash with

if(SendModelingCommand(MCOMMAND_SUBDIVIDE, mdat))
{
GePrint("done");
}
else
{
GePrint("failed");
}

just to be on the safe side..

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:44, xxxxxxxx wrote:

Here's my subdivision code now...

Still crashing.

//SUBDIVISION
  
		Real subAmount;
		subAmount = mcd2.bc->GetLong(SPACEROCK_SUBDIVISIONS);
		mcd2.mode = MODIFY_ALL;
		mcd2.doc = hh->GetDocument();
  
		if(SendModelingCommand(MCOMMAND_SUBDIVIDE, mcd2))
		{
			GePrint("done");
			mcd2.bc->SetBool(MDATA_SUBDIVIDE_HYPER, TRUE);
			mcd2.bc->SetLong(MDATA_SUBDIVIDE_SUB, subAmount);
			mcd2.bc->SetReal(MDATA_SUBDIVIDE_ANGLE, pi);
			//Subdivision Command
			SendModelingCommand(MCOMMAND_SUBDIVIDE, mcd2);
		} 
		else
		{
			GePrint("failed");
		}

Any thoughts?

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 13:55, xxxxxxxx wrote:

hey, dont call SendModelingCommand twice.. its already called in the if condition!

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 14:06, xxxxxxxx wrote:

well.. that was a good thought and a good catch but unfortunately it's still crashing .. this one is a bit of a thorn today. LOL

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 14:14, xxxxxxxx wrote:

another thing could be worth a try, to set the Parameters for an extra BaseContainer like i did it in my example:

BaseContainer bc;
        bc.SetReal(MDATA_OPTIMIZE_TOLERANCE, tolerance);
        bc.SetReal(MDATA_OPTIMIZE_POINTS, TRUE);
        bc.SetReal(MDATA_OPTIMIZE_POLYGONS, TRUE);
        bc.SetReal(MDATA_OPTIMIZE_UNUSEDPOINTS, TRUE);
        cd.bc = &bc;

and in the if (SendModelingCommand... call "cd.op->Message(MSG_UPDATE, NULL);"

Oh, wait, i didnt see you setting mcd2.op to your object, maybe thats the main problem

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 14:21, xxxxxxxx wrote:

yeah I added that in after I sent the message.. that didn't work.. I'
ll try your other suggestion though. Thanks,

~Shawn

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 14:31, xxxxxxxx wrote:

alternatively, did you try CallCommand(14047); ?? maybe that works... but i dont know how you set the parameters in this case..

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 15:15, xxxxxxxx wrote:

Awesome.. It works. Used your different basecontainer suggestion.

//SUBDIVISION
		Real subAmount = bc->GetReal(SPACEROCK_SUBDIVISIONS);
  
		BaseContainer bc2;
		
		bc2.SetBool(MDATA_SUBDIVIDE_HYPER, TRUE);
		bc2.SetLong(MDATA_SUBDIVIDE_SUB, subAmount);
		bc2.SetReal(MDATA_SUBDIVIDE_ANGLE, pi);
  
		mcd2.bc = &bc2;
		mcd2.op = polyCube;
		mcd2.mode = MODIFY_ALL;
		mcd2.doc = hh->GetDocument();
		
  
		if(SendModelingCommand(MCOMMAND_SUBDIVIDE, mcd2))
		{
			GePrint("done");	 
		} 
		else
		{
			GePrint("failed");
		}

Thanks again. I'm calling it a night. Thanks for your help.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 15:18, xxxxxxxx wrote:

Hi, i did a quick test on subdividing and it works here.. dont ask me why it needs to create the dependency list twice, but if i dont do it, the plugin is updating everytime something changes in the editor even if you turn the camera and such.. if someone can tell my why, i'd be happy.

anyways, here is what is working for me:

  
#define pluginID 1000001  
#define pluginName "testObject"  
#include "c4d.h"  
#include "c4d_symbols.h"  
  
class testObject : public ObjectData  
{  
  INSTANCEOF(testObject,ObjectData);  
private:  
public:  
  virtual BaseObject* GetVirtualObjects(PluginObject *op, HierarchyHelp *hh);  
  static NodeData *Alloc(void) { return gNew testObject; }  
};  
  
BaseObject *testObject::GetVirtualObjects(PluginObject *op, HierarchyHelp *hh)  
{        
  BaseDocument* doc = op->GetDocument();  
  ModelingCommandData cd;  
  Bool dirty;  
  BaseObject* main = BaseObject::Alloc(Onull);  
  if (!main) goto Error;  
  
  BaseObject* child = op->GetDown();  
  if (!child) goto Error;  
  op->NewDependenceList();  
  op->AddDependence(hh,child);  
  
  dirty = op->CheckCache(hh) || op->IsDirty(DIRTY_MATRIX|DIRTY_DATA|DIRTY_CHILDREN);  
  dirty = dirty || !op->CompareDependenceList();  
  
  if (!dirty)   
  {  
      blDelete(main);          
      op->TouchDependenceList();          
      return op->GetCache(hh);  
  }  
  
  BaseObject* clone = op->GetAndCheckHierarchyClone(hh,child,HCLONE_ASPOLY,&dirty,0,false);//static_cast<PolygonObject*>(child->GetClone(0,0));  
  if (clone)  
  {  
      GePrint ("cloned");  
      if (clone->GetType()==Opolygon)  
      {          
          GePrint("polygonobject detected");  
          cd.doc = doc;  
          cd.op = clone;  
          BaseContainer bc;  
          bc.SetBool(MDATA_SUBDIVIDE_HYPER, true);  
          bc.SetReal(MDATA_SUBDIVIDE_ANGLE, 90);  
          bc.SetLong(MDATA_SUBDIVIDE_SUB, 2);  
          cd.bc = &bc;  
          if(SendModelingCommand(MCOMMAND_SUBDIVIDE, cd))  
          {  
              GePrint("modeling command sent: MCOMMAND_SUBDIVIDE");  
          }   
          else   
          {  
              GePrint("failed");  
          }  
          clone->InsertUnderLast(main);  
      }  
      else  
      {  
          blDelete(clone);  
      }  
  }  
  op->NewDependenceList();  
  op->AddDependence(hh,child);  
  op->TouchDependenceList();      
  return main;  
  
Error:  
  if (main) blDelete(main);  
  return NULL;  
}  
  
  
  
// be sure to use a unique ID obtained from www.plugincafe.com  
Bool Register_testObject(void)  
{  
  GePrint("- testObject");  
  return RegisterObjectPlugin(pluginID,pluginName,OBJECT_GENERATOR|OBJECT_INPUT,testObject::Alloc,"OtestObject","orgaLine.tif",0);  
}

hope this helps

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 05/06/2010 at 15:19, xxxxxxxx wrote:

*G i was late again