SendModelingCommand, MCData result array question

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/04/2012 at 01:09, xxxxxxxx wrote:

Well for your questions 1 and 3:

Q1. The SDK tells you. For example, under MCOMMAND_JOIN it says 'returns object'. If it doesn't say that, it shouldn't return a new object.
Q3. It's empty because it isn't returning a new object. Your input object is just changed. (Though the SDK does say that if you input multiple objects, which uses the arr parameter, the changed objects are returned in result. But I've never tried that.)

Don't know about Q2. I've always used the MCOMMAND_ series, never used ID_MODELING_. I'd like to know the answer to this, too.

Oh, and be aware that SendModelingCommand is a pig. It never works the way you think it should.

Steve

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/04/2012 at 04:32, xxxxxxxx wrote:

hey,

thanks for your answer, as the code seemed to have no effect on my object i was desperately
trying to get the result array to work, ignoring that the problem obviously lies somewhere else.
i should have done this before, but MCOMMAND_SUBDIVIDE is working as expected. which leads
me to a question, i also always had for python.

how are we supposed to use modellingtools which require some sort of editor highlighting, like
loops or the knifetool ? i found MDATA_KNIFE_ as a mysterious value in toolknife.h, MDATA_KNIFE_
doesn't appear in the res file. is it holding the live selection informations ?

edit : btw i found this here

Originally posted by xxxxxxxx

First, ID_MODELING_MELT_COMMAND is meant to be used with CallCommand() and MCOMMAND_MELT with SendModelingCommand().

ok i found MDATA_OPTIONS, but what the heck is a cid ?

cid MDATA_Options
{
public:
  Real MDATA_SPLINE_FREEHANDTOLERANCE;
  Real MDATA_SPLINE_OUTLINE;
  LONG MDATA_SPLINE_PROJECTMODE;
  LONG MDATA_SPLINE_ADDPOINTSEGMENT;
  Real MDATA_SPLINE_ADDPOINTPOSITION;
  Bool MDATA_SPLINE_ADDPOINTSELECT;
  Bool MDATA_SPLINE_OUTLINESEPARATE;
  Bool MDATA_DISCONNECT_PRESERVEGROUPS;
  Bool MDATA_MIRROR_SNAPPOINTS;
  Bool MDATA_MIRROR_DUPLICATE;
  Bool MDATA_MIRROR_WELD;
  Real MDATA_MIRROR_TOLERANCE;
  LONG MDATA_MIRROR_SYSTEM;
  LONG MDATA_MIRROR_PLANE;
  Real MDATA_MIRROR_VALUE;
  Vector MDATA_MIRROR_POINT;
  Vector MDATA_MIRROR_VECTOR;
  Bool MDATA_MIRROR_SELECTIONS;
  Bool MDATA_MIRROR_ONPLANE;
  Real MDATA_OPTIMIZE_TOLERANCE;
  Bool MDATA_OPTIMIZE_POINTS;
  Bool MDATA_OPTIMIZE_POLYGONS;
  Bool MDATA_OPTIMIZE_UNUSEDPOINTS;
  Real MDATA_CROSSSECTION_ANGLE;
  Bool MDATA_SUBDIVIDE_HYPER;
  Real MDATA_SUBDIVIDE_ANGLE;
  LONG MDATA_SUBDIVIDE_SPLINESUB;
  LONG MDATA_SUBDIVIDE_SUB;
  Vector MDATA_KNIFE_P1;
  Vector MDATA_KNIFE_V1;
  Vector MDATA_KNIFE_P2;
  Vector MDATA_KNIFE_V2;
  Real MDATA_KNIFE_ANGLE;
  Bool MDATA_UNTRIANGULATE_ANGLE;
  Bool MDATA_UNTRIANGULATE_NGONS;
  Real MDATA_UNTRIANGULATE_ANGLE_RAD;
  LONG MDATA_CONVERTSELECTION_LEFT;
  LONG MDATA_CONVERTSELECTION_RIGHT;
  Bool MDATA_CONVERTSELECTION_TOLERANT;
  Bool MDATA_CURRENTSTATETOOBJECT_INHERITANCE;
  Bool MDATA_CURRENTSTATETOOBJECT_KEEPANIMATION;
  Bool MDATA_CURRENTSTATETOOBJECT_NOGENERATE;
  Bool MDATA_ROTATECAMERA;
  LONG MDATA_RING_EDGE;
  LONG MDATA_RING_SELECTION;
  LONG MDATA_RING_SKIP;
  LONG MDATA_FILLSEL_START_POLY;
  LONG MDATA_FILLSEL_SELECTION;
  LONG MDATA_OUTLINESEL_START_POLY;
  LONG MDATA_OUTLINESEL_SELECTION;
  Bool MDATA_RESETSYSTEM_COMPENSATE;
  Bool MDATA_RESETSYSTEM_RECURSIVE;
  Bool MDATA_JOIN_MERGE_SELTAGS;
  Real MDATA_SETVERTEX_VALUE;
  LONG MDATA_SETVERTEX_MODE;
};

it appears quite often in the sdk, but i cannot find any explanation ho to use it.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/04/2012 at 08:06, xxxxxxxx wrote:

tried this,

BaseContainer toolbc, mdatabc;
ModelingCommandData cd; 
  
mdatabc.SetVector( MDATA_KNIFE_P1, Vector(0,0,0) );
mdatabc.SetVector( MDATA_KNIFE_P2, Vector(1,0,0) );
  
toolbc.SetBool(MDATA_KNIFE_RESTRICT, FALSE);
toolbc.SetLong(MDATA_KNIFE_MODE, MDATA_KNIFE_MODE_PLANE);
toolbc.SetLong(MDATA_KNIFE_PLANE, MDATA_KNIFE_PLANE_YZ);
toolbc.SetBool(MDATA_KNIFE_PLANE_SLICING, TRUE);
toolbc.SetLong(MDATA_KNIFE_PLANE_CUTS, 4);
toolbc.SetContainer(MDATA_KNIFE_, mdatabc);
  
cd.doc = GetActiveDocument();
cd.bc = &toolbc;
cd.mode = MODELINGCOMMANDMODE_POLYGONSELECTION;
cd.op = result;
if (SendModelingCommand(MCOMMAND_KNIFE, cd)) GePrint("Beep");
  
return result;

but it doesn't work *scratch head*

edit : to be more specific, it compiles and runs, but my object isn't cut.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/04/2012 at 10:51, xxxxxxxx wrote:

The first thing you should know is that the SMC is riddled with bugs. And you're probably beating a dead horse using the SMC for this.
Try the same code you used. But put something like: ID_MODELING_EXTRUDE_INNER_TOOL in there instead. And it should work just fine for you.

I've reported SMC bugs in the past. For example the old mirror tool only moves points in the Z direction. Regardless of what the settings are in the code.
And then there's things that just don't work at all. Like this:https://developers.maxon.net/forum/topic/5863/5930_tool-doesnt-execute-until-view-is-selected&KW=tool&PID=24928#24928

Here is a possible alternative to using the SMC:

    doc->SetAction(ID_MODELING_KNIFE_TOOL); //Executes the knife tool  
  
  LONG tool_id = doc->GetAction();  
  BasePlugin *tool = NULL;  
  tool = FindPlugin(tool_id, PLUGINTYPE_TOOL);  
  if (!tool) return FALSE;  
  
  tool->SetParameter(DescID(MDATA_KNIFE_RESTRICT), FALSE, DESCFLAGS_SET_0);       //Turns off the restrict option  
  tool->SetParameter(DescID(MDATA_KNIFE_CONSTRAIN_THETA), .65, DESCFLAGS_SET_0);  //Sets the value to 37.242°  
  tool->SetParameter(DescID(MDATA_KNIFE_MODE), MDATA_KNIFE_MODE_LOOP, DESCFLAGS_SET_0);//<--CRASHES C4D!!!

This seems to work for changing everything in the knife tool. Except the mode option.
I've tried a bunch of different things. But it either crashes, or doesn't do anything.
I've also tried changing the knife mode using the tools container. But all I can manage to do is change it in memory. The AM refuses to update for me.

-ScottA

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/04/2012 at 11:58, xxxxxxxx wrote:

hi,

thanks for your reply and the work you put into this. i am aware of the posts that point onto
numerous smc bugs. despite this fact i would really like to know how this is intended to be used.
the class cid MDATA_Options is there for some reason and it is obvious that tool knife won't work
without the vectors (you cannot finish the tool within c4d without hoovering a polygon).

however MDATA_KNIFE_ doesn't seem to be used within c4d. did some quick tests in python :

import c4d
from c4d import documents, utils
  
def main() :
    cube = doc.SearchObject("Cube")
    toolbc = c4d.BaseContainer()
    tool = doc.GetActiveToolData()
    
    toolbc[c4d.MDATA_KNIFE_RESTRICT] = False
    toolbc[c4d.MDATA_KNIFE_MODE] = c4d.MDATA_KNIFE_MODE_PLANE
    toolbc[c4d.MDATA_KNIFE_PLANE] = c4d.MDATA_KNIFE_PLANE_YZ
    toolbc[c4d.MDATA_KNIFE_PLANE_SLICING] = 1
    toolbc[c4d.MDATA_KNIFE_PLANE_CUTS] = 4
    toolbc[c4d.MDATA_KNIFE_P1] = c4d.Vector(0,-1000,0)
    toolbc[c4d.MDATA_KNIFE_P2] = c4d.Vector(0,1000,0)
  
    res = utils.SendModelingCommand(c4d.MCOMMAND_KNIFE, [cube], 
    c4d.MODELINGCOMMANDMODE_POLYGONSELECTION, toolbc, doc)
    
    tool[c4d.MDATA_KNIFE_MODE] = c4d.MDATA_KNIFE_MODE_PLANE
    c4d.EventAdd() 
    for index, value in tool:
        print '{0} ==> {1}'.format(index, value)
    
if __name__=='__main__':
    main()

it would be really nice, if the support could explain how we are meant to use MDATA_Options.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/04/2012 at 14:00, xxxxxxxx wrote:

GetActiveToolData() get's the tool's container. So that can be used without needing to create a brand new container in your python example.
I'm also not sure why you're trying to execute the knife tool with SMC after you've asked for the active tool. That seems backwards to me.

Example:

import c4d  
from c4d import documents, utils  
  
def main() :  
  cube = doc.SearchObject("Cube")  
  c4d.CallCommand(1016030)        #Execute the Knife tool first  
  tool = doc.GetActiveToolData()    #Then ask for the active tool's container data  
    
  tool[c4d.MDATA_KNIFE_RESTRICT] = False  
  tool[c4d.MDATA_KNIFE_MODE] = c4d.MDATA_KNIFE_MODE_PLANE  
  tool[c4d.MDATA_KNIFE_PLANE] = c4d.MDATA_KNIFE_PLANE_YZ  
  tool[c4d.MDATA_KNIFE_PLANE_SLICING] = 1  
  tool[c4d.MDATA_KNIFE_PLANE_CUTS] = 4  
  tool[c4d.MDATA_KNIFE_P1] = c4d.Vector(0,-1000,0)  
  tool[c4d.MDATA_KNIFE_P2] = c4d.Vector(0,1000,0)      
  tool[c4d.MDATA_KNIFE_MODE] = c4d.MDATA_KNIFE_MODE_PLANE  
  for index, value in tool:  
      print '{0} ==> {1}'.format(index, value)  
  c4d.EventAdd()   
    
if __name__=='__main__':  
  main()

From the recent Python forum thread about executing buttons:
Yannick wrote: " MDATA_TRANSFER_ marks the end of MDATA_TRANSFER's container entry enumeration; it's not a valid ID. "
If maxon is consistent. Then that means MDATA_KNIFE_ is also not a valid ID to use with SMC.

If you are attempting to execute the knife tool without the user hovering the mouse over the object. It's not possible.
It's been discussed in the archives.

-ScottA

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/04/2012 at 14:26, xxxxxxxx wrote:

hi,

thanks for your reply,

Originally posted by xxxxxxxx

GetActiveToolData() get's the tool's container. So that can be used without needing to create a brand new container in your python example.
I'm also not sure why you're trying to execute the knife tool with SMC after you've asked for the active tool. That seems backwards to me.

i am aware of that, the script was meant to do 2 things, check if SMC behaves differently in
python and for loping through the tooldata bc of the active tool (the knife tool). the
GetActiveToolData() & bc loop has nothing to do whit the smc part.

Originally posted by xxxxxxxx

If you are attempting to execute the knife tool without the user hovering the mouse over the object. It's not possible. It's been discussed in the archives.
-ScottA

yes i am trying to run the knife tool without hoovering. i couldn't find any threads on the knife
tool & smc. could you provide a link ? what i still don't understand why there is is MDATA_Options
and what it is used for.

Originally posted by xxxxxxxx

Yannick wrote: " MDATA_TRANSFER_ marks the end of MDATA_TRANSFER's container entry enumeration; it's not a valid ID. "

ok this makes sense, however a better naming would clearify things alot, olight ends with
LIGHT_END_, much better imho.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/04/2012 at 14:38, xxxxxxxx wrote:

Here's one thread. But I think remember seeing more than just this one. This is just the first one I picked after doing a search for "knife tool" :
https://developers.maxon.net/forum/topic/2694/2066_knife-tool-in-version-9&KW=Knife+Tool&PID=7950#7950

FYI:
Just in case you don't already know this. Use the advanced search. And set the "Find Posts" option to "Any Date" to see all the really old archived threads.

I would really like to know how to change the knife tool's mode in C++ myself.
I can't understand why my SetParameter() code isn't working.

-ScottA

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/04/2012 at 04:53, xxxxxxxx wrote:

Hi,

Originally posted by xxxxxxxx

I would really like to know how to change the knife tool's mode in C++ myself.
I can't understand why my SetParameter() code isn't working.

You should use a GeData and its Set*() method:

GeData data;
data.SetLong(MDATA_KNIFE_MODE_LOOP);
tool->SetParameter(DescID(MDATA_KNIFE_MODE), data, DESCFLAGS_SET_0);

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/04/2012 at 07:08, xxxxxxxx wrote:

so it still applies, that we cannot use smc knifetool without mouse input, we are not able to set
the knife vectors with MData_Options somehow ?

 Vector MDATA_KNIFE_P1;

  Vector MDATA_KNIFE_V1;

  Vector MDATA_KNIFE_P2;

  Vector MDATA_KNIFE_V2;

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/04/2012 at 08:37, xxxxxxxx wrote:

Thanks Yannick,
That code works if the knife tool is already open. But it still crashes C4D when used like this:

    doc->SetAction(ID_MODELING_KNIFE_TOOL); //Executes the knife tool  
  
  LONG tool_id = doc->GetAction();  
  BasePlugin *tool = NULL;  
  tool = FindPlugin(tool_id, PLUGINTYPE_TOOL);  
  if (!tool) return FALSE;  
  
  if (tool)  
  {  
  GeData data;  
  data.SetLong(MDATA_KNIFE_MODE_LOOP);  
  tool->SetParameter(DescID(MDATA_KNIFE_MODE), data, DESCFLAGS_SET_0); //<---CRASHES!!  
  tool->SetParameter(DescID(MDATA_KNIFE_RESTRICT), FALSE, DESCFLAGS_SET_0);       //Turns off the restrict option  
  tool->SetParameter(DescID(MDATA_KNIFE_CONSTRAIN_THETA), .65, DESCFLAGS_SET_0);  //Sets the value to 37.242°  
  }

I'm not positive about this. But it seems like the knife tool is still loading(or the open dialog plugin doesn't see it as loaded yet) when SetParamerter() kicks in. So it crashes.
Is there a better way to execute the knife code like this?

-ScottA

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/04/2012 at 09:57, xxxxxxxx wrote:

The safest way to change a tool settings is to access its data container calling GetToolData() :

BaseContainer* data = GetToolData(doc, ID_MODELING_KNIFE_TOOL);
data->SetLong(MDATA_KNIFE_MODE, MDATA_KNIFE_MODE_LOOP);

This way it works if the tool is open or not.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/04/2012 at 11:07, xxxxxxxx wrote:

OK thanks.

This advice contradicts the sticky posted here about always using Get&Set parameter() instead of BaseContainers. So I try not to use BaseContainers as much as possible.
But I realize in programming there are no absolutes. And sometimes you have no choice.

Still. I suppose this could maybe confuse some people.

-ScottA

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 18/04/2012 at 04:27, xxxxxxxx wrote:

i have replaced the smc with my own code , so i do not need this specific example anymore,
but i still would really like to know, how we are supposed to use MDATA_Options.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 18/04/2012 at 07:11, xxxxxxxx wrote:

MDATA_Options doesn't exist in the SDK. It's just a group of all container IDs for modeling commands.
In the documentation IDs are grouped for better indexing.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 18/04/2012 at 08:06, xxxxxxxx wrote:

so, we have to write the ids from MData_Options into the bc of the respective tool to
use them or aren't we allowed to use the ids at all ? sorry, i still don't get it.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 19/04/2012 at 00:11, xxxxxxxx wrote:

Originally posted by xxxxxxxx

so, we have to write the ids from MData_Options into the bc of the respective tool to
use them or aren't we allowed to use the ids at all ? sorry, i still don't get it.

Yes you can use the IDs listed in MData_Options. For example MDATA_CURRENTSTATETOOBJECT_INHERITANCE, MDATA_CURRENTSTATETOOBJECT_KEEPANIMATION and MDATA_CURRENTSTATETOOBJECT_NOGENERATE for MCOMMAND_CURRENTSTATETOOBJECT.

And the IDs from MData_Options are placed under their related command in SendModelingCommand() documentation.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 19/04/2012 at 03:34, xxxxxxxx wrote:

hi,

thanks for the clarification. that i wasn't able to set the vectors for the knife tool is just a limitation
of the knifetool ?(i am aware that my orginal apporach to write these vectors into a seperate bc,
which i tried to write into the id MDATA_KNIFE_ was wrong, i also tried to write these values directly
into the ModellingCommandData bc.)

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 19/04/2012 at 08:54, xxxxxxxx wrote:

Originally posted by xxxxxxxx

that i wasn't able to set the vectors for the knife tool is just a limitation
of the knifetool ?

I contacted the developers on this.

Helper

On 29/01/2013 at 07:23, xxxxxxxx wrote:

Hi,

A recent thread made me remember that I got some months ago an interesting code snippet from the developers that was showing how to send a knife modeling command.

What's most important to understand is: MDATA_KNIFE_P1, MDATA_KNIFE_P2, MDATA_KNIFE_V1 and MDATA_KNIFE_V2 have to be given in world space.
For this purpose we can use the handy conversion methods of BaseView (parent class of BaseDraw). In the example we call BaseView.SW() to convert screen space coordinates to world space.
v1 and v2 are basically vectors showing away from the camera (and going through p1/p2). v1 % v2 build the normal of the cutting plane.

The following example will show how to cut the selected spline just in the middle of the view:

import c4d
from c4d import utils
  
  
def SplineCutter(doc, op, bd, x1, y1, x2, y2, bSelect) :
    
    p1 = bd.SW(c4d.Vector(x1, y1, 0.0))
    v1 = bd.SW(c4d.Vector(x1, y1, 100.0)) - p1
    p2 = bd.SW(c4d.Vector(x2, y2, 0.0))
    v2 = bd.SW(c4d.Vector(x2, y2, 100.0)) - p2
    
    bc = c4d.BaseContainer()
    bc.SetVector(c4d.MDATA_KNIFE_P1, p1)
    bc.SetVector(c4d.MDATA_KNIFE_P2, p2)
    bc.SetVector(c4d.MDATA_KNIFE_V1, v1)
    bc.SetVector(c4d.MDATA_KNIFE_V2, v2)
    bc.SetBool(c4d.MDATA_KNIFE_RESTRICT, False)
    bc.SetBool(c4d.MDATA_KNIFE_SELECTCUTS, bSelect)
    
    if op is not None and op.CheckType(c4d.Ospline) :
    
        utils.SendModelingCommand(command = c4d.MCOMMAND_KNIFE,
                                  list = [op],
                                  bc = bc,
                                  doc = doc,
                                  flags = c4d.MODELINGCOMMANDFLAGS_CREATEUNDO)
        c4d.EventAdd()
  
  
def main() :
    
    bd = doc.GetActiveBaseDraw()
    frame = bd.GetFrame()
    middleX = (frame['cr']-frame['cl'])/2
    
    SplineCutter(doc, op, bd, middleX, frame['ct'], middleX, frame['cb'], True)
    
  
if __name__=='__main__':
    main()

You can then modify the call to SplineCutter() in main() to use other coordinates from the mouse, a tool etc. You can also 'play' with others MDATA_KNIFE_ options.

EDIT: Fixed the code.