Basic PyGenerator plugin Please
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 15/10/2011 at 14:52, xxxxxxxx wrote:
Hi Ilya.
I need to have the PyGenerator seen as a spline by a Cloner etc.
-without- making it editable the same way as a cube generated
in the PyGenerator is seen by a Cloner.The PyDoubleCircle example manage that and I can't figure out why.
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 15/10/2011 at 16:22, xxxxxxxx wrote:
In C++. We need to use the " virtual SplineObject* GetContour() " method. As part of the class.
If it's left out. The spline does not even draw.
This does not seem to be the case in python.Per the C++ SDK. GetContour() is used for generating splines.
AFAIK. It's not needed to generate other types of objects.This is just a wild guess.
But it looks like the way the python version is ported from C++ is allowing us to generate splines in python without using GetContour(). Which might be a bad practice.
My guess is that this is not the "proper" way to build a spline generator. And will cause things like the Align-to-Spline tag not to work with it.This is just a wild guess based on my experience with it in C++.
-ScottA
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 16/10/2011 at 02:56, xxxxxxxx wrote:
Hello Lennart
I try to put spl-pygen object, clonner draw it normally, without returning of base object(make editable) as described.At more complex code, pyGen was failed at drawing of object if it is in clonner/or mo-object.
Also try Nux95's DrawApi helpers, thanks a'lot to Niklas!
Niklas, can you make sample with DrawLines if it-s possible, i some ago apply at sample project...but lost it.... -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 16/10/2011 at 09:43, xxxxxxxx wrote:
Maybe I need to be even more clear
Make a PyGenerator generating a spline.
ie return c4d.BaseObject(c4d.Osplinecircle)Then put the PyGenerator in a Cloner as Object source
does not allow me to clone stuff on the PyGenerator
as the Cloner does not see the PyGenerator as a spline.Put the PyDoubleCircle in the Cloner instead as Object source
and I can clone.The issue really comes down to that I can't see what in
the PyDoubleCircle example that makes it work.
(Other than it's using GetContour() ) -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 16/10/2011 at 10:22, xxxxxxxx wrote:
seems it's not possible, if only add optionally new functions as presenting of PyGen like splineObj...like checkbox with GetContour dependecy
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 16/10/2011 at 18:42, xxxxxxxx wrote:
Update. I've actually got it working (as a plugin), stripping down the
PyDoubleCircle example bit by bit..
I'll post the barebone working code this week with a new question
as it became a new issue how handle updating it.
My guess it's about GetCache(), Get/SetDirty(), all new
territory for me.Thanks till later!
Lennart -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 24/10/2011 at 07:59, xxxxxxxx wrote:
Hello
There is interesting and unstable(need to glue to matrix of obj) test -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 24/10/2011 at 09:04, xxxxxxxx wrote:
That's a good twist, adding the Cloner link via the script, nice.
Don't need to do the CSTO either really.Cheers
Lennart -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 24/10/2011 at 09:18, xxxxxxxx wrote:
Don't need to do the CSTO either really.
You're right! Thanks a'lot.
I played with M.Zabiegly's pointcloud's sample(big thanks to his xpresso tutorials), trying to get cache from procedural objects(Lennart, i make same 3d fashion sample as you did) and try to apply same CSTO.
For CSTO and additional py-snippets i want to say Thanks to Sebastien, Niklas, Scott...
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 26/10/2011 at 08:40, xxxxxxxx wrote:
I have question is this function replicate GetContour() - BaseObject.GetRealSpline ?
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 26/10/2011 at 11:14, xxxxxxxx wrote:
Not really I'm afraid.
But I've come a long way linking Cloners, MoSplines etc
from within the plugin as per the example you show earlier.
This way basically any virtual object within the generator
can be picked. -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 18/11/2011 at 09:20, xxxxxxxx wrote:
Originally posted by xxxxxxxx
Also try Nux95's DrawApi helpers, thanks a'lot to Niklas!
Niklas, can you make sample with DrawLines if it-s possible, i some ago apply at sample project...but lost it....I'm sorry, haven't ever read this post before.
Can you explain more what 'ya need ?PS: My latest achievement in the DrawApi module. (Animations)
http://www.screenr.com/mQLs -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 19/11/2011 at 23:44, xxxxxxxx wrote:
Hallo
Can you explain more what 'ya need ?
I mean your previous work as Python Draw Helper(sample with bd, draw polygon triangle with coloring)
your GUI development is wonderful!!!!
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 20/11/2011 at 02:20, xxxxxxxx wrote:
Ah I thought you were talking about 2d GUI, thats why I postet the video.
Thanks !And what was your problem, now ? ^^
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 21/11/2011 at 10:51, xxxxxxxx wrote:
thanks, i have not any, pass it
or return TRUE -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 22/11/2011 at 03:59, xxxxxxxx wrote:
Why not try the Py-DoubleCircle example from the Python SDK?
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 22/11/2011 at 05:42, xxxxxxxx wrote:
Hi Jack. That's what I did. But the issue turned out to be the cache.
As it only refresh itself internally and not from changes of external input.
I started another thread about that but it's not totally solved other than the workarounds mentioned there (link from within the script/code)https://developers.maxon.net/forum/topic/6070/6249_getcontour-refresh-or-uncache-how
Cheers
Lennart -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 22/11/2011 at 18:33, xxxxxxxx wrote:
Oh, sorry. I just see in your initial posting that you did that.
I should read more carefully.