Get/SetDParameter + CUSTOMDATATYPE_SPLINE [SOLVED]
-
On 03/07/2015 at 06:08, xxxxxxxx wrote:
Can you post some code? If you want to keep it secret, you could also send it to sdk_support or via PM.
I'd also be interested in the Get/SetDParameter() implementation, that broke the keyframes. -
On 03/07/2015 at 07:42, xxxxxxxx wrote:
sure, here is some code:
in MaterialData:Bool SevenPhotonsMaterial::GetDParameter(GeListNode* node, const DescID& id, GeData& t_data, DESCFLAGS_GET& flags) { BaseContainer* data = ((BaseMaterial* )node)->GetDataInstance(); GeData knd(SEVENPHOTONS_NODE_CUSTOMDATATYPE, iSnodeDataType(m_type)); data->GetParameter(SEVENPHOTONS_MAT_NODE, knd); iSnodeDataType* kndData = static_cast<iSnodeDataType*> (knd.GetCustomDataType(SEVENPHOTONS_NODE_CUSTOMDATATYPE)); if(id[0].id == SEVENPHOTONS_MAT_PREVIEW) { return GetDParameterPreview(data, (GeData* )&t_data, flags, SEVENPHOTONS_MAT_PREVIEW, updatecount, (BaseMaterial* )node); } else if(kndData->selectedNode > 0) { if(kndData->nodes[kndData->selectedNode].getInternalCount() > 0) { for(Int32 i = 0; i < kndData->nodes[kndData->selectedNode].getInternalCount(); ++i) { Int32 ids = kndData->nodes[kndData->selectedNode].getInternalID(i); if(id[0].id == ids) { if(kndData->nodes[kndData->selectedNode].getInternalDataType(i) & SEVENPHOTONS_NODE_ANYTHREE) { Vector vdata = (kndData->nodes[kndData->selectedNode].getInternalData(i)).GetVector(); HandleDescGetVector(id, vdata, t_data, flags); } else if(kndData->nodes[kndData->selectedNode].getInternalDataType(i) == SEVENPHOTONS_NODE_CURVE) { t_data = kndData->nodes[kndData->selectedNode].getInternalData(i); flags |= DESCFLAGS_GET_PARAM_GET; } else { t_data = kndData->nodes[kndData->selectedNode].getInternalData(i); //data->SetString(ids, kndData->nodes[kndData->selectedNode].getName()); flags |= DESCFLAGS_GET_PARAM_GET; } return MaterialData::GetDParameter(node, id, t_data, flags); } } } if(kndData->nodes[kndData->selectedNode].getInputCount() > 0) { for(Int32 i = 0; i < kndData->nodes[kndData->selectedNode].getInputCount(); ++i) { Int32 ids = kndData->nodes[kndData->selectedNode].getInputID(i); //wire connected if(kndData->nodes[kndData->selectedNode].getInputWireId(i) >= 0) continue; if(id[0].id == ids) { if(kndData->nodes[kndData->selectedNode].getInputDataType(i) & SEVENPHOTONS_NODE_ANYTHREE) { Vector vdata = (kndData->nodes[kndData->selectedNode].getInputData(i)).GetVector(); HandleDescGetVector(id, vdata, t_data, flags); } else { t_data = kndData->nodes[kndData->selectedNode].getInputData(i); //data->SetString(ids, kndData->nodes[kndData->selectedNode].getName()); flags |= DESCFLAGS_GET_PARAM_GET; } return MaterialData::GetDParameter(node, id, t_data, flags); } } } } return MaterialData::GetDParameter(node, id, t_data, flags); } Bool SevenPhotonsMaterial::SetDParameter(GeListNode* node, const DescID& id, const GeData& t_data, DESCFLAGS_SET& flags) { BaseContainer* data = ((BaseMaterial* )node)->GetDataInstance(); GeData knd(SEVENPHOTONS_NODE_CUSTOMDATATYPE, iSnodeDataType(m_type)); data->GetParameter(SEVENPHOTONS_MAT_NODE, knd); iSnodeDataType* kndData = static_cast<iSnodeDataType*> (knd.GetCustomDataType(SEVENPHOTONS_NODE_CUSTOMDATATYPE)); updatecount++; if(id[0].id == SEVENPHOTONS_MAT_PREVIEW) { return SetDParameterPreview(data, &t_data, flags, SEVENPHOTONS_MAT_PREVIEW); } else if(kndData->selectedNode > 0) { //if(id[0].id == ++ids) //{ // kndData->nodes[kndData->selectedNode].setName(t_data.GetString()); // kndData->nodes[kndData->selectedNode].adjustSNode(false); // data->SetParameter(SEVENPHOTONS_MAT_NODE, GeData(SEVENPHOTONS_NODE_CUSTOMDATATYPE, *kndData)); // return MaterialData::SetDParameter(node, id, t_data, flags); //} if(kndData->nodes[kndData->selectedNode].getInternalCount() > 0) { for(Int32 i = 0; i < kndData->nodes[kndData->selectedNode].getInternalCount(); ++i) { Int32 ids = kndData->nodes[kndData->selectedNode].getInternalID(i); if(id[0].id == ids) { if(kndData->nodes[kndData->selectedNode].getInternalDataType(i) & SEVENPHOTONS_NODE_ANYTHREE) { Vector vdata = (kndData->nodes[kndData->selectedNode].getInternalData(i)).GetVector(); HandleDescSetVector(vdata, id, vdata, t_data, flags); kndData->nodes[kndData->selectedNode].setInternalData(i, GeData(vdata)); } else if(kndData->nodes[kndData->selectedNode].getInternalDataType(i) == SEVENPHOTONS_NODE_CURVE) { kndData->nodes[kndData->selectedNode].setInternalData(i, t_data); flags |= DESCFLAGS_SET_PARAM_SET; } else { kndData->nodes[kndData->selectedNode].setInternalData(i, t_data); flags |= DESCFLAGS_SET_PARAM_SET; } data->SetParameter(SEVENPHOTONS_MAT_NODE, GeData(SEVENPHOTONS_NODE_CUSTOMDATATYPE, *kndData)); return MaterialData::SetDParameter(node, id, t_data, flags); } } } if(kndData->nodes[kndData->selectedNode].getInputCount() > 0) { for(Int32 i = 0; i < kndData->nodes[kndData->selectedNode].getInputCount(); ++i) { Int32 ids = kndData->nodes[kndData->selectedNode].getInputID(i); //wire connected if(kndData->nodes[kndData->selectedNode].getInputWireId(i) >= 0) continue; if(id[0].id == ids) { if(kndData->nodes[kndData->selectedNode].getInputDataType(i) & SEVENPHOTONS_NODE_ANYTHREE) { Vector vdata = (kndData->nodes[kndData->selectedNode].getInputData(i)).GetVector(); HandleDescSetVector(vdata, id, vdata, t_data, flags); kndData->nodes[kndData->selectedNode].setInputData(i, vdata); } else { kndData->nodes[kndData->selectedNode].setInputData(i, t_data); flags |= DESCFLAGS_SET_PARAM_SET; } data->SetParameter(SEVENPHOTONS_MAT_NODE, GeData(SEVENPHOTONS_NODE_CUSTOMDATATYPE, *kndData)); return MaterialData::SetDParameter(node, id, t_data, flags); } } } } return MaterialData::SetDParameter(node, id, t_data, flags); }tell me which portions you want, as I guess GeUserArea and CustomDataType portions are not needed here.
I will post more code soon if needed.
-
On 04/07/2015 at 09:54, xxxxxxxx wrote:
I noticed that if I remove Get/SetDParamter() , I can't access the modified data, so I have to use them.
-
On 10/07/2015 at 09:09, xxxxxxxx wrote:
Hi Mohamed,
terribly sorry, this took so long. I have to admit, I went down the wrong road all the way to the end, before I realized, I took the wrong branch. My fault!
In Germany we say: Shooting yourself into your own knee.
Also I have no clean example code to post here, yet. But before entering my weekend, I still wanted to provide you some infos.
Basically you were right in the beginning with your assumption, that it's similar to handling a vector. Unfortunately there's no macro nor any defines for the CUSTOMGUI_SPLINE.
Here's how you do it manually:
After checking, that your spline got addressed (id[0].id == your spline id), you need to check if id[1].id.
If it is zero, t_data is of type CUSTOMDATATYPE_SPLINE. So you get a complete updated spline.
If it is unequal zero, then you need to handle the "subchannels".
If the id[1].id is greater 10000, you can use this:Int32 knotIdx = (id[1].id - 11100) / 100; Int32 partIdx = id[1].id - (11100 + (knotIdx * 100));knotIdx can be used directly with GetKnot().
partIdx decodes as follows:
0: position x
1: position y
2: left tangent x
3: left tangent y
4: right tangent x
5: right tangent yI hope this helps. On Monday I will probably post some more code. Also there are more subchannels (that's why > 10000).
-
On 10/07/2015 at 09:54, xxxxxxxx wrote:
great
about decoding partIdx, is this bit masks? (1 << 0, 1 << 1, ...) or just Int32 values?
also waiting for all subchannels, the same for Gradient "as it is very similar, it has its post though"thanks for the help Andreas.
-
On 10/07/2015 at 22:46, xxxxxxxx wrote:
Hi Mohamed,
no, it's not a bit mask, just integer. And the data you get is of type Float.
-
On 28/07/2015 at 17:45, xxxxxxxx wrote:
Hi Andreas,
I tried to fix the spline Get/SetDParameter, but this is a nightmare...
there are a lot of unknown description ids "not shown by show sub-channels"any idea how to iterate over all sub channels and set/get as required?
here is what I did so far, works fine to some extent "tangents and point count are making a problem, if you animate point count the behavior is undefined"inline void HandleDescGetSpline(const DescID &tid, SplineData *curve, GeData &t_data, DESCFLAGS_GET &flags) { Int32 knotIdx = (tid[1].id - 11100) / 100; Int32 partIdx = tid[1].id - (11100 + (knotIdx * 100)); CustomSplineKnot* knot = curve->GetKnot(knotIdx); switch(partIdx) { default: case 0: t_data.SetFloat(knot->vPos.x); flags |= DESCFLAGS_GET_PARAM_GET; break; case 1: t_data.SetFloat(knot->vPos.y); flags |= DESCFLAGS_GET_PARAM_GET; break; case 2: t_data.SetFloat(knot->vTangentLeft.x); flags |= DESCFLAGS_GET_PARAM_GET; break; case 3: t_data.SetFloat(knot->vTangentLeft.y); flags |= DESCFLAGS_GET_PARAM_GET; break; case 4: t_data.SetFloat(knot->vTangentRight.x); flags |= DESCFLAGS_GET_PARAM_GET; break; case 5: t_data.SetFloat(knot->vTangentRight.y); flags |= DESCFLAGS_GET_PARAM_GET; break; } } inline void HandleDescSetSpline(const DescID &tid, SplineData *curve, const GeData &t_data, DESCFLAGS_SET &flags) { Int32 knotIdx = (tid[1].id - 11100) / 100; Int32 partIdx = tid[1].id - (11100 + (knotIdx * 100)); CustomSplineKnot* knot = curve->GetKnot(knotIdx); switch(partIdx) { default: case 0: knot->vPos.x = t_data.GetFloat(); flags |= DESCFLAGS_SET_PARAM_SET; break; case 1: knot->vPos.y = t_data.GetFloat(); flags |= DESCFLAGS_SET_PARAM_SET; break; case 2: knot->vTangentLeft.x = t_data.GetFloat(); flags |= DESCFLAGS_SET_PARAM_SET; break; case 3: knot->vTangentLeft.y = t_data.GetFloat(); flags |= DESCFLAGS_SET_PARAM_SET; break; case 4: knot->vTangentRight.x = t_data.GetFloat(); flags |= DESCFLAGS_SET_PARAM_SET; break; case 5: knot->vTangentRight.y = t_data.GetFloat(); flags |= DESCFLAGS_SET_PARAM_SET; break; } }else if(kndData->nodes[mnode].getInternalDataType(i) == SEVENPHOTONS_NODE_CURVE) { if(id[1].id == 0) { kndData->nodes[mnode].setInternalData(i, t_data); data->SetParameter(DescID(id[0].id), t_data); flags |= DESCFLAGS_SET_PARAM_SET; } else if(id[1].id == 1000) { //kndData->nodes[mnode].setInternalData(i, GeData(1.f)); //data->SetParameter(DescID(id[0].id, id[1].id), GeData(1.f)); //flags |= DESCFLAGS_SET_PARAM_SET; } else { //SplineData *curve = (SplineData* )t_data.GetCustomDataType(CUSTOMDATATYPE_SPLINE); SplineData *curve = (SplineData* )(kndData->nodes[mnode].getInternalData(i)).GetCustomDataType(CUSTOMDATATYPE_SPLINE); HandleDescSetSpline(id, curve, t_data, flags); } }else if(kndData->nodes[mnode].getInternalDataType(i) == SEVENPHOTONS_NODE_CURVE) { if(id[1].id == 0) { t_data = GeData(CUSTOMDATATYPE_SPLINE, *(kndData->nodes[mnode].getInternalData(i)).GetCustomDataType(CUSTOMDATATYPE_SPLINE)); flags |= DESCFLAGS_GET_PARAM_GET; } else if(id[1].id == 1000) { //t_data.SetFloat(1.f); //flags |= DESCFLAGS_GET_PARAM_GET; } else { SplineData *curve = (SplineData* )(kndData->nodes[mnode].getInternalData(i)).GetCustomDataType(CUSTOMDATATYPE_SPLINE); HandleDescGetSpline(id, curve, t_data, flags); } } -
On 25/08/2015 at 08:56, xxxxxxxx wrote:
By now, there's an example on GitHub, demonstrating this.
-
On 25/08/2015 at 10:09, xxxxxxxx wrote:
thanks Andreas, is it the same?
-
On 26/08/2015 at 08:53, xxxxxxxx wrote:
To explain Mohamed's question: We were in direct communication and he received the example before it got published on GitHub.
@Mohamed: Yes, it's basically the same.