rendersettings copy, activate, search, delete

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/10/2012 at 04:00, xxxxxxxx wrote:

great Yannick, thanks a lot!!!!!!

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/10/2012 at 05:07, xxxxxxxx wrote:

ok so here some definitions:

but I still strugle with deleting renderdata

  
def RDCopyToTemp() :   
    rd = doc.GetActiveRenderData()   
    RDclone = rd.GetClone()   
    #print RDclone   
    RDclone.SetName("temp")   
    doc.InsertRenderDataLast(RDclone)   
    c4d.EventAdd   
  
def GetNextObject(op) :   
    if op==None: return None   
    if op.GetDown() : return op.GetDown()   
    while not op.GetNext() and op.GetUp() :   
        op = op.GetUp()   
    return op.GetNext()   
  
def RDFindAndActivate(name) : # needs GetNextObject   
    myRD = doc.GetFirstRenderData()   
    if myRD==None: return   
    while myRD:   
        if myRD.GetName() == name:   
            myRD.SetBit(c4d.BIT_ACTIVERENDERDATA)   
            c4d.EventAdd   
        myRD = GetNextObject(myRD)

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/10/2012 at 05:54, xxxxxxxx wrote:

Originally posted by xxxxxxxx

but I still strugle with deleting renderdata

To delete a render data you can call rd.Remove(). This method is defined in GeListNode (one of the parents class of RenderData).

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 16/10/2012 at 06:12, xxxxxxxx wrote:

thanks a lot... again

I know that starters can be nerve wrecking... sorry

all the best
Jops

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 12/11/2012 at 06:09, xxxxxxxx wrote:

I#m sitting once again on this project... and unfortunately again got stuck

I managed to copy the renderdata (see above) and I managed to activate it.
there are two ways it needs to be activated:

- the name should be orange to indicate that i can change the values in this settings
- and the square left of the name should be white to indicate that these are the rendersettings that get used.

the square can just be active with one rendersettings set at a time
but several names can be activated(orange) simutaniously.

my problem:

i managed to copy the renderdata and to activate the name and the square.
unfortunately the name of the "old renderdata" is also still active(orange) so the old settings get changed (first in list) instead of the new once.

I tryed:

old_rd.DelBit(c4d.BIT_ACTIVERENDERDATA)
old_rd.DelBit(c4d.BIT_ACTIVE)
c4d.EventAdd()

but it didn#t work

thanks for help
Jops

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 12/11/2012 at 07:35, xxxxxxxx wrote:

Hi,

afaik using BaseDocument.SetActiveRenderData() automatically deactivates amy other renderdata.

Best,
Niklas

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/11/2012 at 06:36, xxxxxxxx wrote:

Hi Niklas,

well yes and no the activation dot, square or what ever you call it, that indicated the renderdata that get used is exclusiv. so there can only be one renderdata checked at a time.

but you can select mor then one renderdata to change values (indicated by the orange rendersettingsname in the list.

here is a bit of code that shows the problem:
old code (ugly)... I will change the naming... of the definitions and variables

  
import c4d   
from c4d import gui   
#Welcome to the world of Python   
  
  
  
def RDCopy(name) :   
    rd = doc.GetActiveRenderData()   
    RDclone = rd.GetClone()   
    #print RDclone   
    RDclone.SetName(name)   
    doc.InsertRenderDataLast(RDclone)   
    c4d.EventAdd   
  
def GetNextObject(op) :   
    if op==None: return None   
    if op.GetDown() : return op.GetDown()   
    while not op.GetNext() and op.GetUp() :   
        op = op.GetUp()   
    return op.GetNext()   
  
def RDFindAndActivate(name) : # needs GetNextObject   
    myRD = doc.GetFirstRenderData()   
    if myRD==None: return   
    while myRD:   
        if myRD.GetName() == name:   
            doc.SetActiveRenderData(myRD)   
            c4d.EventAdd   
        myRD = GetNextObject(myRD)   
  
def main() :   
       
    RDCopy("test")   
    RDFindAndActivate("test")   
  
  
if __name__=='__main__':   
    main()

best regards
Jops

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 15/11/2012 at 08:42, xxxxxxxx wrote:

I see where's the problem. Even if we set the new active render data, the old active render data is still selected (its name is in orange color).

Here's how I changed your RDFindAndActivate() function:

def RDFindAndActivate(name) :
    myRD = doc.GetFirstRenderData()
    if myRD==None: return
    while myRD:
        if myRD.GetName()==name:
            doc.SetActiveRenderData(myRD)
            c4d.EventAdd()
        else:
            myRD.SetAllBits(2) # Reverse engineered with GetAllBits(), 2 is BIT_ACTIVE but we deactivate it so use the literal value
        myRD = GetNextObject(myRD)

Also just a note, c4d.EventAdd() wasn't called because you just forgot the parenthesis to actually call the method.

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 17/11/2012 at 03:19, xxxxxxxx wrote:

Hi Yannick,

thanks that works great.

one (hopefully) last questiion

if I use the RDFindAndDelete funktion with renderdata that has a child renderdata

  
    def GetNextRObject(obj) :   
        if obj==None: return None   
        if obj.GetDown() : return obj.GetDown()   
        while not obj.GetNext() and obj.GetUp() :   
            obj = obj.GetUp()   
        return obj.GetNext()   
  
    def RDFindAndDelete(name) :   
        myRD = doc.GetFirstRenderData()   
        if myRD==None: return   
        while myRD:   
            if myRD.GetName()==name:   
               myRD.Remove()   
               c4d.EventAdd()   
            myRD = GetNextRObject(myRD)

I gett a error message: Reference error: the object 'c4d.documents.RenderData' is not alive.

but the script still works as intended (at least I think so

best regards
Jops

Helper

THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED

On 19/11/2012 at 01:57, xxxxxxxx wrote:

Originally posted by xxxxxxxx

if I use the RDFindAndDelete funktion with renderdata that has a child renderdata

I gett a error message: Reference error: the object 'c4d.documents.RenderData' is not alive.

but the script still works as intended (at least I think so

This is because you deleted a render data that has a child render data. If you remove a parent render data, the children still references it but it's not alive anymore.
Before deleting a render data you have to make sure it has no children, removing or moving them.