crash after moving timeline
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 15/09/2009 at 03:13, xxxxxxxx wrote:
To write the data in the geo-file, i use the C++-STL ofstream instead of the hyperflile class.
Could this cause the crash?cheers,
Oli -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 15/09/2009 at 03:21, xxxxxxxx wrote:
Are you writing files during realtime playback?
Also if possible post some simplified code.
cheers,
Matthias -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 15/09/2009 at 05:01, xxxxxxxx wrote:
It should write during realtime playback (to save whole sequences) or after manual frame change.
So here is some code
> <code>
> //Calculate
> Bool AixWrite::Calculate(GvNode *bn, GvPort *port, GvRun *run, GvCalc *calc){
>
> BaseContainer* data = bn->GetOpContainerInstance();
>
> if(!data){
>
> //gib FALSE zurueck
> return FALSE;
> }
>
> //own Geometrystructure (Cinema4D-Objects can be converted to
> //this one)-->works
> AixGeometry toWrite = AixGeometry();
>
> GeData inputFilename = GeData();
>
> toWrite = *(AixGeometry* ) AixGvCheckAndGetPortGeData(bn, port, run, calc, ports, GVAIXWRITE_INPUT_GEOMETRY_INDEX).GetCustomDataType(CUSTOMDATATYPE_AIXGEOMETRY);
> inputFilename = AixGvCheckAndGetPortGeData(bn, port, run, calc, ports, GVAIXWRITE_INPUT_FILENAME_INDEX);
>
> //get actual frame
> BaseDocument* doc = bn->GetDocument();
> BaseTime time = doc->GetTime();
> LONG fps = doc->GetFps();
> LONG frame = time.GetFrame(fps);
>
> //if DirtyCount is not equal or frame changed, then write geo-File
> if(toWrite.GetDirtyCount() != this->inputPorts[0].GetLong() || frame != this->currenFrame){
>
> //cashes the data
> this->inputPorts[0].SetLong(toWrite.GetDirtyCount());
> this->currenFrame = frame;
>
> if(on){
>
> //FileStream
> ofstream out;
>
> //Wenn eine Pfadangabe vorliegt
> if(inputFilename != GeData(NOTOK)){
>
> //open FileStream
> out.open(inputFilename.GetFilename().
> GetString().GetCStringCopy());
> }
> else if(inputFilename == GeData(NOTOK)){
>
> return FALSE;
> }
>
> //geo-File
> out << "PGEOMETRY V5" << endl;
>
> //if there are polys
> if(!toWrite.GetNgonArray().empty()){
> //write
> out << "NPoints " << toWrite.GetPointArray().size() << " NPrims " << toWrite.GetNgonArray().size() << endl;
> }
> //only points
> else{
> out << "NPoints " << toWrite.GetPointArray().size() << " NPrims 0" << endl;
> }
>
> out << "NPointGroups 0 NPrimGroups 0" << endl;
>
> //write points, polys etc........
>
> out << "beginExtra" << endl;
> out << "endExtra" << endl;
>
> //close FilesStream
> out.close();
> }
> }
>
> return TRUE;
> }
> </code>cheers,
Oli -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 15/09/2009 at 07:02, xxxxxxxx wrote:
One additional question.
What is the ident-parameter in the hyperfile Open-method and what have i to declare?cheers,
Oli -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 16/09/2009 at 05:42, xxxxxxxx wrote:
New approach.
I use now the Cinema4D-BaseFile to write the geo-file. As i thought, the STL causes the crash. So far so godd, but now i have an new problem.
In one line of the geo-file Cinema writes a number previous to the entry.> <code>
> AutoAlloc<BaseFile> bf;
>
> if(on){
>
> if(inputFilename != GeData(NOTOK)){
>
> bf->Open(inputFilename.GetFilename().GetString(), GE_WRITE, 0, 0, 0, 0);
> }
>
> bf->WriteString("PGEOMETRY V5\n");
> if(!toWrite.GetNgonArray().empty()){
>
> bf->WriteString("NPoints " + LongToString(toWrite.GetPointArray().size()) + " NPrims " + LongToString(toWrite.GetNgonArray().size()) + "\n");
> }
> else{
> bf->WriteString("NPoints " + LongToString(toWrite.GetPointArray().size()) + " NPrims 0\n");
> }
>
> bf->WriteString("NPointGroups 0 NPrimGroups 0\n");
>
> bf->WriteString("NPointAttrib " + LongToString(toWrite.GetAixAttributeArray(AIXPOINT).size()) + " NVertexAttrib " + LongToString(toWrite.GetAixAttributeArray(AIXNLINE).size()) + " NPrimAttrib " + LongToString(toWrite.GetAixAttributeArray(AIXNGON).size()) + " NAttrib 1\n");
>
> //..........
>
> bf->Close();
> </code>This is a snip of what i get:
PGEOMETRY V5
NPoints 8 NPrims 6
NPointGroups 0 NPrimGroups 0
8NPointAttrib 0 NVertexAttrib 0 NPrimAttrib 0 NAttrib 1
Why is there number 8 in front of NPointAttrib
Thanks, Oli -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 16/09/2009 at 05:52, xxxxxxxx wrote:
To write ASCII text files I usally use my own WriteString function since the BaseFile::WriteString() seems a bit strange to me.
My own WriteString()
>
\> Bool WriteString(const String line, BaseFile\* file) \> { \> if(!file) return FALSE; \> \> CHAR \*charline = NULL; \> LONG strlength = line.GetCStringLen(St7bithex); \> charline = (CHAR\* )GeAlloc(strlength+1); \> \> if(!charline) return FALSE; \> \> strlength = line.GetCString(charline, strlength+1, St7bithex); \> \> LONG i; \> for(i=0; i<strlength; i++) \> { \> if(!file->WriteChar(charline[i])) return FALSE; \> } \> \> GeFree(charline); \> \> return TRUE; \> } \>BaseFile::WriteString()
>
\> Bool BaseFile::WriteString(const String &v;) \> { \> Bool ok; \> LONG len = v.GetCStringLen()+1; \> CHAR \*mem = (CHAR\* ) GeAlloc(sizeof(CHAR)\*len); \> if (!mem) \> { \> SetError(FILEERROR_MEMORY); \> return FALSE; \> } \> \> v.GetCString(mem,len); \> ok = WriteLong(len) && WriteBytes(mem,len); \> GeFree(mem); \> \> return ok; \> } \>cheers,
Matthias -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 16/09/2009 at 06:13, xxxxxxxx wrote:
Thanks Matthias, your WriteString() works fine and solves my problem.
cheers,
Oli -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 17/09/2009 at 07:22, xxxxxxxx wrote:
Now i have nearly the same problem as before. But now i can change the frame on teh timeline between 3 and 11 times before the system crahs.
I thought it crahs during the calculation. But the node calculates and writes a "perfect" geo-file and then the system cashs.
Any ideas?cheers,
Oli -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 18/09/2009 at 07:02, xxxxxxxx wrote:
no ideas or a guess? i am glad about every proposal.
cheers Oli
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 18/09/2009 at 07:07, xxxxxxxx wrote:
Sorry, I had not the time yet to dig deeper into it. Does this only happen from within a XPresso node? What about expressions or generators? This may be something to look into. I will try to find a solution but I have to discuss this with our developers.
cheers,
Matthias -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 18/09/2009 at 07:20, xxxxxxxx wrote:
It happens only in this XPresso Node. The other nodes works fine if i change the frame on the timeline. My generator works too.
Thanking you in anticipation,
Oli
-
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 21/09/2009 at 06:33, xxxxxxxx wrote:
Ok, I tried to confirm this. I am not sure if the problem is really in the node. Here is the code of a simple node that writes out geometry of a polygon object. It seems to work fine without any crashes. Maybe this helps.
>
\> #include "c4d.h" \> #include "c4d_operatordata.h" \> \> #include "print_node.h" \> \> \> class PrintNode : public GvOperatorData \> { \> INSTANCEOF(PrintNode,GvOperatorData) \> \> private: \> BaseList2D \*result; \> GvValue \*v1; \> \> public: \> virtual Bool Init(GeListNode \*node); \> \> virtual const String GetDetailedText(GvNode \*bn); \> virtual const String GetText(GvNode \*bn); \> \> virtual Bool iCreateOperator(GvNode \*bn); \> \> virtual Bool AddToCalculationTable(GvNode \*bn, GvRun \*r); \> \> virtual Bool InitCalculation(GvNode \*bn, GvCalc \*c, GvRun \*r); \> virtual void FreeCalculation(GvNode \*bn, GvCalc \*c); \> virtual Bool Calculate(GvNode \*bn, GvPort \*port, GvRun \*r, GvCalc \*c); \> \> static NodeData\* Alloc(void) { return gNew PrintNode; } \> }; \> \> Bool PrintNode::Init(GeListNode \*node) \> { \> result = NULL; \> return TRUE; \> } \> \> Bool PrintNode::iCreateOperator(GvNode \*bn) \> { \> bn->SetShowPortNamesState(FALSE); \> BaseContainer \*bc = bn->GetOpContainerInstance(); if (!bc) return FALSE; \> return SUPER::iCreateOperator(bn); \> } \> \> const String PrintNode::GetDetailedText(GvNode \*bn) \> { \> return GvGetOperatorDetailedText(this,bn); \> } \> \> const String PrintNode::GetText(GvNode \*bn) \> { \> if (result) \> return result->GetName(); \> \> return "NULL"; \> } \> \> Bool PrintNode::AddToCalculationTable(GvNode \*bn, GvRun \*r) \> { \> return r->AddNodeToCalculationTable(bn); \> } \> \> Bool PrintNode::InitCalculation(GvNode \*bn, GvCalc \*c, GvRun \*r) \> { \> v1 = bn->AllocCalculationHandler(PRINT_NODE_INPUT,c,r,0); if (!v1) return FALSE; \> return TRUE; \> } \> \> void PrintNode::FreeCalculation(GvNode \*bn, GvCalc \*c) \> { \> bn->FreeCalculationHandler(v1); \> } \> \> Bool PrintNode::Calculate(GvNode \*bn, GvPort \*port, GvRun \*r, GvCalc \*c) \> { \> if (!v1->Calculate(bn,GV_PORT_INPUT,r,c)) return FALSE; \> \> LONG index; \> if (!v1->GetPort()->GetInstance(result, r, &index;)) return FALSE; \> \> if (result && c->document && result->GetType() == Opolygon) \> { \> AutoAlloc<BaseFile> file; \> if (!file) return FALSE; \> \> BaseTime time = c->document->GetTime(); \> Real fps = c->document->GetFps(); \> String frame = "c:\ est"+LongToString(time.GetFrame(fps)); \> Filename fn(frame); \> \> if (!file->Open(fn, GE_WRITE, FILE_IGNOREOPEN, GE_INTEL)) return FALSE; \> \> const Vector \*points = ToPoly(result)->GetPointR(); \> LONG pcnt = ToPoly(result)->GetPointCount(); \> \> for (LONG i=0; i<pcnt; i++) \> { \> if (!file->WriteVector(points[i])) return FALSE; \> } \> } \> \> return TRUE; \> } \> \> //////////////////////////////// \> \> #define GVPRINTNODE_ID 1010815 \> \> Bool RegisterPrintNode() \> { \> return GvRegisterOperatorPlugin(GVPRINTNODE_ID, "Print Node", 0, PrintNode::Alloc, "print_node", 0, ID_GV_OPCLASS_TYPE_GENERAL, ID_GV_OPGROUP_TYPE_GENERAL, 0, NULL); \> } \>cheers,
Matthias -
THE POST BELOW IS MORE THAN 5 YEARS OLD. RELATED SUPPORT INFORMATION MIGHT BE OUTDATED OR DEPRECATED
On 22/09/2009 at 03:38, xxxxxxxx wrote:
Thanks Matthias,
i got it. But it is realy awkward :-).
I allocate a LONG-array to save the polygoninformation temporarily.
And there was the problem.
>
\> LONG\* polygon = (LONG\* ) GeAlloc(4 + sizeof(LONG)); //+ instead of \* \>Anyway thanks for your help.
cheers,
Oli