#include <c4d_basedraw.h>

Inheritance diagram for BaseView:

[legend]

Detailed Description

Represents an editor view. Cannot be instantiated. In most cases the sub-class BaseDraw is used. It adds functions for drawing into the view. See the dbasedraw.h description file for container IDs.

Private Member Functions
	BaseView ()

	~BaseView ()

Frame
void	GetFrame (Int32 cl, Int32 ct, Int32 cr, Int32 cb)

void	GetSafeFrame (Int32 cl, Int32 ct, Int32 cr, Int32 cb)

View Matrix/Rotation
Matrix	GetMg () const

Matrix	GetMi () const

const Matrix &	GetBaseMatrix () const

void	SetBaseMatrix (const Matrix &m)

Float	GetPlanarRotation () const

void	SetPlanarRotation (Float r)

Test Point/Clipping
Bool	TestPoint (Float x, Float y) const

Bool	TestPointZ (const Vector &p) const

Bool	TestClipping3D (const Vector &mp, const Vector &rad, const Matrix &mg, Bool clip2d, Bool clipz) const

Bool	ClipLine2D (Vector p1, Vector p2) const

Bool	ClipLineZ (Vector p1, Vector p2) const

Spaces Conversion
Vector	WS (const Vector &p) const

Vector	SW (const Vector &p) const

Vector	SW_Reference (Float x, Float y, const Vector &wp) const

Vector	WC (const Vector &p) const

Vector	CW (const Vector &p) const

Vector	SC (const Vector &p) const

Vector	CS (const Vector &p, Bool z_inverse) const

Vector	WC_V (const Vector &v) const

Vector	CW_V (const Vector &v) const

Vector	WS_V (const Vector &v, const Vector &p) const

Vector	SW_V (const Vector &v, const Vector &p) const

Pixel Conversion
Float	PW_S (Float z, Bool horizontal) const

Float	WP_S (Float z, Bool horizontal) const

Float	PW_W (const Vector &p, Bool horizontal) const

Float	WP_W (const Vector &p, Bool horizontal) const

Z-Near/Far
Bool	ZSensitiveNear () const

Float	ZSensitiveNearClipping () const

Bool	ZSensitiveFar () const

Float	ZSensitiveFarClipping () const

Project Point
Vector	ProjectPointOnLine (const Vector &p, const Vector &v, Float mouse_x, Float mouse_y, Float offset=nullptr, Int32 err=nullptr)

Vector	ProjectPointOnPlane (const Vector &p, const Vector &v, Float mouse_x, Float mouse_y, Int32 *err=nullptr)

Miscellaneous
Bool	BackfaceCulling (const Vector &n, const Vector &p)

Int32	GetProjection () const

StereoCameraInfo *	GetStereoInfo () const

void	GetViewParameter (Vector offset, Vector scale, Vector *scale_z) const

Int32	GetColorSpace () const

Additional Inherited Members
Public Member Functions inherited from BaseList2D
void	SetBit (Int32 mask)

Bool	GetBit (Int32 mask) const

void	DelBit (Int32 mask)

void	ToggleBit (Int32 mask)

Int32	GetAllBits () const

void	SetAllBits (Int32 bits)

void	SetBitEx (Int32 mask, Int32 flags)

const Char *	GetViewportRenderId (VIEWPORT_RENDER_ID typeId) const

BaseList2D *	GetNext ()

const BaseList2D *	GetNext () const

BaseList2D *	GetPred ()

const BaseList2D *	GetPred () const

BaseContainer	GetData ()

void	SetData (const BaseContainer &bc, Bool add=true)

const BaseContainer &	GetDataInstanceRef () const

BaseContainer &	GetDataInstanceRef ()

const BaseContainer *	GetDataInstance () const

BaseContainer *	GetDataInstance ()

String	GetName () const

void	SetName (const maxon::String &name, Bool setDirty=true)

String	GetBubbleHelp ()

Bool	TransferGoal (BaseList2D *dst, Bool undolink)

Bool	TransferMarker (BaseList2D *dst) const

Bool	CopyDynamicDescriptionFrom (const BaseList2D *src)

Bool	Scale (Float scale)

Bool	Edit ()

void	GetIcon (IconData *dat)

GeListHead *	GetNLARoot (Bool create)

BaseList2D *	AnimationLayerRemap (BaseObject **layer=nullptr)

String	GetTypeName () const

const BaseList2D *	GetMain () const

BaseList2D *	GetMain ()

void	InsertTrackSorted (CTrack *track)

Bool	AddEventNotification (BaseList2D bl, NOTIFY_EVENT eventid, NOTIFY_EVENT_FLAG flags, const BaseContainer data)

Bool	RemoveEventNotification (const BaseDocument doc, BaseList2D bl, NOTIFY_EVENT eventid)

Bool	FindEventNotification (const BaseDocument doc, BaseList2D bl, NOTIFY_EVENT eventid)

Bool	SetDescIDState (const DescID &id, DESCIDSTATE descidstate)

DESCIDSTATE	GetDescIDState (const DescID &id, Bool tolerant) const

GeListHead *	GetOverrideRoot (Bool create)

BaseOverride *	GetFirstOverride ()

GeListHead *	GetShaderRepositoryRoot (Bool create)

GeListHead *	GetHiddenShaderRoot (Bool create)

maxon::NimbusForwardRef	GetNimbusRef (const maxon::Id &spaceId) const

maxon::Result< maxon::NimbusForwardRef >	PrivateGetOrCreateNimbusRef (const maxon::Id &spaceId)

void	RemoveNimbusRef (const maxon::Id &spaceId)

maxon::Result< maxon::HashMap< maxon::Id, maxon::NimbusForwardRef > >	GetAllNimbusRefs () const

Bool	IsNodeBased () const

maxon::Result< Bool >	GetAccessedObjects (METHOD_ID method, AccessedObjectsCallback &access) const

maxon::Result< Bool >	GetAccessedObjectsRec (ACCESSED_OBJECTS_MASK read, ACCESSED_OBJECTS_MASK write, METHOD_ID method, Bool withSiblings, Bool withChildren, AccessedObjectsCallback &access) const

maxon::Result< Bool >	GetAccessedObjectsOfHierarchy (ACCESSED_OBJECTS_MASK read, ACCESSED_OBJECTS_MASK write, METHOD_ID method, AccessedObjectsCallback &access) const

maxon::Result< Bool >	GetAccessedObjectsOfChildren (ACCESSED_OBJECTS_MASK read, ACCESSED_OBJECTS_MASK write, METHOD_ID method, AccessedObjectsCallback &access) const

maxon::Result< Bool >	GetAccessedObjectsOfFirstChildHierarchy (ACCESSED_OBJECTS_MASK read, ACCESSED_OBJECTS_MASK write, METHOD_ID method, AccessedObjectsCallback &access) const

maxon::Result< maxon::GenericData >	GroupChanges ()

void	GetMarkerStampEx (UInt32 l1, UInt32 l2)

const GeMarker &	GetMarker () const

void	SetMarker (const GeMarker &m)

Bool	AddUniqueID (Int32 appid, const Char *const mem, Int bytes)

Bool	FindUniqueID (Int32 appid, const Char *&mem, Int &bytes) const

Int32	GetUniqueIDCount () const

Bool	GetUniqueIDIndex (Int32 idx, Int32 &id, const Char *&mem, Int &bytes) const

Bool	SetAnimatedParameter (const CTrack *track, const DescID &id, const GeData &t_data1, const GeData &t_data2, Float mix, DESCFLAGS_SET flags)

Bool	GetAnimatedParameter (const DescID &id, GeData &t_data1, GeData &t_data2, Float &mix, DESCFLAGS_GET flags) const

BaseShader *	GetFirstShader () const

void	InsertShader (BaseShader shader, BaseShader pred=nullptr)

void	ClearKeyframeSelection ()

Bool	FindKeyframeSelection (const DescID &id)

Bool	SetKeyframeSelection (const DescID &id, Bool selection)

Bool	KeyframeSelectionContent ()

LayerObject *	GetLayerObject (const BaseDocument *doc)

const LayerObject *	GetLayerObject (const BaseDocument *doc) const

Bool	SetLayerObject (const LayerObject *layer)

const LayerData *	GetLayerData (const BaseDocument *doc, Bool rawdata=false) const

Bool	SetLayerData (BaseDocument *doc, const LayerData &data)

GeListHead *	GetCTrackRoot (Bool create)

const GeListHead *	GetCTrackRoot () const

const CTrack *	GetFirstCTrack () const

CTrack *	GetFirstCTrack ()

const CTrack *	FindCTrack (const DescID &id) const

CTrack *	FindCTrack (const DescID &id)

Public Member Functions inherited from GeListNode
GeListNode *	GetNext ()

const GeListNode *	GetNext () const

GeListNode *	GetPred ()

const GeListNode *	GetPred () const

GeListNode *	GetDown ()

const GeListNode *	GetDown () const

GeListNode *	GetUp ()

const GeListNode *	GetUp () const

GeListNode *	GetDownLast ()

const GeListNode *	GetDownLast () const

void	InsertBefore (GeListNode *bl)

void	InsertAfter (GeListNode *bl)

void	InsertUnder (GeListNode *bl)

void	InsertUnderLast (GeListNode *bl)

void	Remove ()

void	FlushChilds ()

void	MoveChildrenTo (GeListNode *dest)

GeListHead *	GetListHead ()

const GeListHead *	GetListHead () const

Int32	GetNodeID (Int32 index=0) const

template<typename CAST >
const CAST *	GetNodeData (Int32 index=0) const

template<typename CAST >
CAST *	GetNodeData (Int32 index=0)

void	SetCustomData (GeListNode *node)

GeListNode *	GetCustomData ()

const GeListNode *	GetCustomData () const

const BaseDocument *	GetDocument () const

BaseDocument *	GetDocument ()

maxon::Result< Bool >	GetBranchInfo (const maxon::ValueReceiver< const BranchInfo & > &info, GETBRANCHINFO flags) const

Bool	IsDocumentRelated () const

Int32	GetInfo () const

Bool	GetNBit (NBIT bit) const

UInt32	GetNBitMask (Int32 index) const

Bool	ChangeNBit (NBIT bit, NBITCONTROL bitmode)

Public Member Functions inherited from C4DAtomGoal
Bool	HasLinks () const

Public Member Functions inherited from C4DAtom
Int32	GetType () const

Int32	GetRealType () const

Int32	GetDiskType () const

Bool	IsInstanceOf (Int32 id) const

Int32	GetClassification () const

Bool	Message (Int32 type, void *data=nullptr)

Bool	MultiMessage (MULTIMSG_ROUTE flags, Int32 type, void *data)

C4DAtom *	GetClone (COPYFLAGS flags, AliasTrans *trn) const

Bool	CopyTo (C4DAtom dst, COPYFLAGS flags, AliasTrans trn) const

Bool	Read (HyperFile *hf, Int32 id, Int32 level)

Bool	Write (HyperFile *hf) const

Bool	ReadObject (HyperFile *hf, Bool readheader)

Bool	WriteObject (HyperFile *hf) const

Bool	GetDescription (Description *description, DESCFLAGS_DESC flags) const

Bool	GetParameter (const DescID &id, GeData &t_data, DESCFLAGS_GET flags) const

Bool	SetParameter (const DescID &id, const GeData &t_data, DESCFLAGS_SET flags)

DynamicDescription *	GetDynamicDescriptionWritable ()

const DynamicDescription *	GetDynamicDescription () const

Bool	CopyDynamicDescriptionFrom (const BaseList2D *src)

Bool	GetEnabling (const DescID &id, const GeData &t_data, DESCFLAGS_ENABLE flags, const BaseContainer *itemdesc) const

Bool	TranslateDescID (const DescID &id, DescID &res_id, C4DAtom *&res_at)

UInt32	GetDirty (DIRTYFLAGS flags) const

void	SetDirty (DIRTYFLAGS flags)

UInt32	GetHDirty (HDIRTYFLAGS mask) const

void	SetHDirty (HDIRTYFLAGS mask)

Static Public Member Functions inherited from BaseList2D
static BaseList2D *	Alloc (Int32 type)

static void	Free (BaseList2D *&bl)

Static Public Attributes inherited from BaseList2D
static const Int32	SETBIT_FLAG_NODIRTY

static const Int32	SETBIT_FLAG_REMOVE

Constructor & Destructor Documentation

◆ BaseView()

BaseView ( )

private

◆ ~BaseView()

~BaseView ( )

private

Member Function Documentation

◆ GetFrame()

void GetFrame	(	Int32 *	cl,
		Int32 *	ct,
		Int32 *	cr,
		Int32 *	cb
	)

Assigns the dimension in pixels of the view window. The coordinates are relative to the upper left corner of the view, and specify visible pixels (i.e. the border is not included).

Parameters

[out]	cl	Is assigned the first visible left pixel position.
[out]	ct	Is assigned the first visible top pixel position.
[out]	cr	Is assigned the first visible right pixel position.
[out]	cb	Is assigned the first visible bottom pixel position.

◆ GetSafeFrame()

void GetSafeFrame	(	Int32 *	cl,
		Int32 *	ct,
		Int32 *	cr,
		Int32 *	cb
	)

Assigns the dimension in pixels of the safe frame (the frame which is rendered) to the passed pointers. The coordinates are relative to the upper left corner of the view.

Parameters

[out]	cl	Is assigned the first visible left pixel position.
[out]	ct	Is assigned the first visible top pixel position.
[out]	cr	Is assigned the first visible right pixel position.
[out]	cb	Is assigned the first visible bottom pixel position.

◆ GetMg()

Matrix GetMg ( ) const

Gets the camera matrix, i.e. the global object matrix of the current camera object.

Returns: The camera matrix.

◆ GetMi()

Matrix GetMi ( ) const

Gets the inverse of the camera matrix. Equivalent to !GetMg(), but faster.

Returns: The inverted camera matrix.

◆ GetBaseMatrix()

const Matrix& GetBaseMatrix ( ) const

Gets the base matrix.

Note: The base matrix is multiplied with the camera matrix so that it is possible to have e.g. a frontal view into another direction than +Z.

Returns: The base matrix.

◆ SetBaseMatrix()

void SetBaseMatrix ( const Matrix & m )

Sets the base matrix.

Note: The base matrix is multiplied with the camera matrix so that it is possible to have e.g. a frontal view into another direction than +Z.

Parameters

[in] m The new base matrix.

◆ GetPlanarRotation()

Float GetPlanarRotation ( ) const

Gets the rotation of the planar views.

Returns: The planar rotation.

◆ SetPlanarRotation()

void SetPlanarRotation ( Float r )

Sets the rotation of the planar views.

Parameters

[in] r The new planar rotation.

◆ TestPoint()

Bool TestPoint	(	Float	x,
		Float	y
	)		const

Tests if the point is within the boundary returned by GetFrame(). The point coordinates must be in screen space.

Parameters

[in]	x	The X coordinate of the point to check.
[in]	y	The Y coordinate of the point to check.

Returns: true if the point is inside the frame, otherwise false.

◆ TestPointZ()

Bool TestPointZ ( const Vector & p ) const

Tests if the point is visible within the near and far clipping planes defined in the view according to the current projection. The point must be in camera space.

Parameters

[in] p The point to check.

Returns: true if the point is visible in the view, otherwise false.

◆ TestClipping3D()

Bool TestClipping3D	(	const Vector &	mp,
		const Vector &	rad,
		const Matrix &	mg,
		Bool *	clip2d,
		Bool *	clipz
	)		const

Tests if a bounding box is visible in the view according to the current projection. The box is defined by these eight corner coordinates:

p[0] = Vector(mp.x + rad.x, mp.y + rad.y, mp.z + rad.z) * mg;
p[1] = Vector(mp.x + rad.x, mp.y + rad.y, mp.z - rad.z) * mg;
p[2] = Vector(mp.x + rad.x, mp.y - rad.y, mp.z + rad.z) * mg;
p[3] = Vector(mp.x + rad.x, mp.y - rad.y, mp.z - rad.z) * mg;
p[4] = Vector(mp.x - rad.x, mp.y + rad.y, mp.z + rad.z) * mg;
p[5] = Vector(mp.x - rad.x, mp.y + rad.y, mp.z - rad.z) * mg;
p[6] = Vector(mp.x - rad.x, mp.y - rad.y, mp.z + rad.z) * mg;
p[7] = Vector(mp.x - rad.x, mp.y - rad.y, mp.z - rad.z) * mg;

Parameters

[in]	mp	The center of the box.
[in]	rad	The radius of the box.
[in]	mg	The transformation to world space from mp/rad space.
[out]	clip2d	Is assigned true if the box needs 2D clipping, i.e. if any part of it is outside of the view boundaries. Otherwise false.
[in]	clipz	Is assigned true if the box needs Z clipping, i.e. if any part of it is too close to or behind the camera. Otherwise false.

Returns: true if the box is visible, otherwise false.

◆ ClipLine2D()

Bool ClipLine2D	(	Vector *	p1,
		Vector *	p2
	)		const

Clips the line defined by p1 and p2 so that it fits within the view boundary. The new values are stored directly in the passed vectors. The points are in screen space.
When combined with ClipLineZ(), the Z clipping must be done first and then the 2D clipping.

Note: When combined with ClipLineZ(), the Z clipping must be done first and then the 2D clipping.

Parameters

[in,out]	p1	The start of the line. Is assigned the clipped start point.
[in,out]	p2	The end of the line. Is assigned the clipped end point.

Returns: true if any part of the line was within the view boundary, otherwise false.

◆ ClipLineZ()

Bool ClipLineZ	(	Vector *	p1,
		Vector *	p2
	)		const

Clips the line defined by p1 and p2 so that it does not come too close to or behind the camera (i.e. it assures that, for those projections that have Z clipping, no values are negative or goes through the camera's zero plane).
The new values are stored directly in the passed vectors. The points must be in camera space.

Note: When combined with ClipLine2D(), the Z clipping must be done first and then the 2D clipping.

Parameters

[in,out]	p1	The start of the line. Is assigned the clipped start point.
[in,out]	p2	The end of the line. Is assigned the clipped end point.

Returns: true if any part of the line was within the camera boundary, otherwise false.

◆ WS()

Vector WS ( const Vector & p ) const

World to screen conversion. Converts p from world space to screen space (pixels relative to the view), and returns the conversion.
The orthogonal distance to the world point is stored in world units in the Z axis of the result.

Parameters

[in] p A point in world space.

Returns: The point in screen space.

◆ SW()

Vector SW ( const Vector & p ) const

Screen to world conversion. Converts p from screen space (pixels relative to the view) to world space.
The X and Y coordinates of the point are given in screen space, the Z coordinate is the orthogonal distance in world units to the point from the view plane.

Parameters

[in] p A point in screen space.

Returns: The point in world space.

◆ SW_Reference()

Vector SW_Reference	(	Float	x,
		Float	y,
		const Vector &	wp
	)		const

Screen to world conversion. Converts the point given by x and y in screen space (pixels relative to the view) to world space.
The Z coordinate is taken from the orthogonal distance in world units to wp from the view plane.

Parameters

[in]	x	The X coordinate in screen space.
[in]	y	The Y coordinate in screen space.
[in]	wp	The reference point in world space.

Returns: The point in world space.

◆ WC()

Vector WC ( const Vector & p ) const

World to camera conversion. Converts p from world to camera space.

Parameters

[in] p A point in world space.

Returns: The point in camera space.

◆ CW()

Vector CW ( const Vector & p ) const

Camera to world conversion. Converts p from camera to world space.

Parameters

[in] p A point in camera space.

Returns: The point in world space.

◆ SC()

Vector SC ( const Vector & p ) const

Screen to camera conversion. Converts p from screen (pixels relative to the view) to camera space.
The X and Y coordinates of the point are given in screen space, the Z coordinate is the orthogonal distance in world units to the point from the view plane.

Parameters

[in] p A point in screen space.

Returns: The point in camera space.

◆ CS()

Vector CS	(	const Vector &	p,
		Bool	z_inverse
	)		const

Camera to screen conversion. Converts p from camera to screen space (pixels relative to the view).

Parameters

[in]	p	A point in camera space.
[in]	z_inverse	If true if true, otherwise false. the Z coordinate of the converted point is inverted. This is used by the Z-buffer.

Returns: The point in screen space.

◆ WC_V()

Vector WC_V ( const Vector & v ) const

World to camera vector conversion. Converts the world vector v to camera space.

Parameters

[in] v A vector in world space.

Returns: The vector in camera space.

◆ CW_V()

Vector CW_V ( const Vector & v ) const

Camera to world vector conversion. Converts the camera vector v to world space.

Parameters

[in] v A vector in camera space.

Returns: The vector in world space.

◆ WS_V()

Vector WS_V	(	const Vector &	v,
		const Vector &	p
	)		const

World to screen vector conversion. Converts v from world space to screen space (pixels relative to the view), and returns the conversion.
The orthogonal distance to the world point is stored in world units in the Z axis of the result.

Parameters

[in]	v	A vector in world space.
[in]	p	A reference point in world space.

Returns: The vector in screen space.

◆ SW_V()

Vector SW_V	(	const Vector &	v,
		const Vector &	p
	)		const

Screen to world vector conversion. Converts v from screen space (pixels relative to the view) to world space.
The X and Y coordinates of the point are given in screen space, the Z coordinate is the orthogonal distance in world units to the point from the view plane.

Parameters

[in]	v	A vector in screen space.
[in]	p	A reference point in screen space.

Returns: The vector in world space.

◆ PW_S()

Float PW_S	(	Float	z,
		Bool	horizontal
	)		const

Gets the size in world units for a single pixel at the given Z-depth z.

Parameters

[in]	z	The Z-depth.
[in]	horizontal	true if the size is measured horizontally, false for vertically measurement. This is useful for non-square pixel aspect ratios.

Returns: The size in world units.

◆ WP_S()

Float WP_S	(	Float	z,
		Bool	horizontal
	)		const

Gets the size in pixels for a single world unit at the given Z-depth z.

Parameters

[in]	z	The Z-depth.
[in]	horizontal	true if the size is measured horizontally, false for vertically measurement. This is useful for non-square pixel aspect ratios.

Returns: The size in pixels.

◆ PW_W()

Float PW_W	(	const Vector &	p,
		Bool	horizontal
	)		const

Gets the size in world units for a single pixel at screen space vector p.

Parameters

[in]	p	The pixel in screen space.
[in]	horizontal	true if the size is measured horizontally, false for vertically measurement. This is useful for non-square pixel aspect ratios.

Returns: The size in world units.

◆ WP_W()

Float WP_W	(	const Vector &	p,
		Bool	horizontal
	)		const

Gets the size in screen space pixels for a single world unit at world position p.

Parameters

[in]	p	The point in world space.
[in]	horizontal	true if the size is measured horizontally, false for vertically measurement. This is useful for non-square pixel aspect ratios.

Returns: The size in screen space pixels.

◆ ZSensitiveNear()

Bool ZSensitiveNear ( ) const

Indicates if the view has Z near-clipping.

Returns: true if the view has Z near-clipping, otherwise false.

◆ ZSensitiveNearClipping()

Float ZSensitiveNearClipping ( ) const

Gets the near-clipping of Z sensitive view.

Returns: The Z near-clipping distance.

◆ ZSensitiveFar()

Bool ZSensitiveFar ( ) const

Indicates if the view is Z far-clipping sensitive.

Returns: true if the view has Z far-clipping, otherwise false.

◆ ZSensitiveFarClipping()

Float ZSensitiveFarClipping ( ) const

Gets the far-clipping of Z sensitive view.

Returns: The Z far-clipping distance.

◆ ProjectPointOnLine()

Vector ProjectPointOnLine	(	const Vector &	p,
		const Vector &	v,
		Float	mouse_x,
		Float	mouse_y,
		Float *	offset = `nullptr`,
		Int32 *	err = `nullptr`
	)

Gets the nearest point on the line defined by p and v for a given mouse coordinate.

Parameters

[in]	p	The start position of the line in world space.
[in]	v	The direction of the line. The length of this vector determines the scaling of offset.
[in]	mouse_x	The mouse X-coordinate.
[in]	mouse_y	The mouse Y-coordinate.
[out]	offset	Assigned the distance from p scaled by the length of v. offset = distance to p / length of v.
[out]	err	Assigned an error code: 1 = Failed to find nearest point correctly, lines may be beyond horizon, behind camera, or ray line and line may be parallel. 2 = The point p is either beyond the start or end of the described segment (but a point will still be returned for the line/ray).

Returns: The nearest point on the line.

◆ ProjectPointOnPlane()

Vector ProjectPointOnPlane	(	const Vector &	p,
		const Vector &	v,
		Float	mouse_x,
		Float	mouse_y,
		Int32 *	err = `nullptr`
	)

Gets the nearest point on the plane defined by p and v for a given mouse coordinate.

Parameters

[in]	p	The plane's position in world space.
[in]	v	The plane's normal in world space.
[in]	mouse_x	The mouse X-coordinate.
[in]	mouse_y	The mouse Y-coordinate.
[out]	err	Assigned an error code: 1 = No intersection with plane possible, e.g. plane perpendicular to viewport so ray from view can never hit plane. 2 = Out of range error, the calculation will be inaccurate, e.g. can be caused by point being over the horizon. 3 = Hit point is behind the clipping plane of the camera, could sometimes result in an incorrect hit value.

Returns: The nearest point on the plane.

◆ BackfaceCulling()

Bool BackfaceCulling	(	const Vector &	n,
		const Vector &	p
	)

Tests the face with normal n and center p for backface culling.

Parameters

[in]	n	The face normal in camera space.
[in]	p	The face center in camera space.

Returns: true if the face is not visible, otherwise false.

◆ GetProjection()

Int32 GetProjection ( ) const

Gets the projection used by the view. See Ocamera.h for projection types values.

Returns: The projection type.

◆ GetStereoInfo()

StereoCameraInfo* GetStereoInfo ( ) const

Gets the stereoscopic camera information data.

Returns: The stereoscopic camera data. Cinema 4D owns the pointed StereoCameraInfo.

◆ GetViewParameter()

void GetViewParameter	(	Vector *	offset,
		Vector *	scale,
		Vector *	scale_z
	)		const

Retrieves the parameters for the current projection. See Ocamera.h for projection types.
The following is the code used internally to project points:

#define CAMDIST 0.05
 
Vector WorldToCamera(const Vector &p)
{
  return p*inverse_camera_matrix;
}
 
Vector CameraToWorld(const Vector &p)
{
  return p*camera_matrix;
}
 
Vector CameraToScreen(const Vector &pp)
{
  Vector p = pp;
 
  if (projection==Pperspective)
  {
    Float nz = p.z<=0.0 ? 1.0/CAMDIST : 1.0/(p.z + CAMDIST);
    p.x = p.x*scale.x*nz+off.x;
    p.y = p.y*scale.y*nz+off.y;
    return p;
  }
 
  p.x = (p.x*scale.x)+off.x;
  p.y = (p.y*scale.y)+off.y;
 
  switch (projection)
  {
    case Pmilitary: case Pfrog: case Pbird: case Pgentleman:
      p.x += p.z*scale.x*scalez.x;
      p.y -= p.z*scale.y*scalez.y;
      break;
  }
 
  return p;
}
 
Vector ScreenToCamera(const Vector &pp)
{
  Vector p = pp;
 
  switch (projection)
  {
    case Pmilitary: case Pfrog: case Pbird: case Pgentleman:
      p.x -= p.z*scale.x*scalez.x;
      p.y += p.z*scale.y*scalez.y;
      break;
  }
 
  p.x = (p.x-off.x)/scale.x;
  p.y = (p.y-off.y)/scale.y;
 
  if (projection==Pperspective)
  {
    Float nz = p.z + CAMDIST;
    p.x *= nz;
    p.y *= nz;
  }
 
  return p;
}

For non-axonometric projection here is the code to calculate offset/scale:

void InitView(BaseObject *camera, Float xres, Float yres, Float pix_x, Float pix_y)
{
  // xres/yres are the resolution
  // pix_x/pix_y are the pixel aspect ratio (normally 1:1)
 
  Matrix opm = camera->GetMg();
  Float ap;
  const BaseContainer& data = camera->GetDataInstanceRef();
 
  projection=data.GetInt32(CAMERA_PROJECTION,Pperspective);
  if (projection!=Pperspective && projection!=Pparallel)
  {
    opm.v1 = Vector(1.0,0.0,0.0);
    opm.v2 = Vector(0.0,1.0,0.0);
    opm.v3 = Vector(0.0,0.0,1.0);
  }
 
  off.x = xres*0.5;
  off.y = yres*0.5;
 
  if (b_ab==Pperspective)
  {
    ap=data.GetFloat(CAMERAOBJECT_APERTURE, 36.0);
    scale.x = data.GetFloat(CAMERA_FOCUS,35.0) / ap * xres;
  }
  else
    scale.x = xres/1024.0*data.GetFloat(CAMERA_ZOOM,1.0);
 
  scale.y = -scale.x*pix_x/pix_y;
}

Parameters

[out]	offset	Assigned the center of the view in screen space.
[out]	scale	Depends on the projection mode: For perspective mode: Assigned the size of the view plane in pixels. For axonometric modes: Assigned the number of pixels per meter.
[out]	scale_z	Assigned the different Z scale for the X and Y axes in axonometric projections.

◆ GetColorSpace()

Int32 GetColorSpace ( ) const

Gets the color space for the view.

Returns: The color space for the view.

Detailed Description

Private Member Functions

Frame

View Matrix/Rotation

Test Point/Clipping

Spaces Conversion

Pixel Conversion

Z-Near/Far

Project Point

Miscellaneous

Additional Inherited Members

Constructor & Destructor Documentation

◆ BaseView()

◆ ~BaseView()

Member Function Documentation

◆ GetFrame()

◆ GetSafeFrame()

◆ GetMg()

◆ GetMi()

◆ GetBaseMatrix()

◆ SetBaseMatrix()

◆ GetPlanarRotation()

◆ SetPlanarRotation()

◆ TestPoint()

◆ TestPointZ()

◆ TestClipping3D()

◆ ClipLine2D()

◆ ClipLineZ()

◆ WS()

◆ SW()

◆ SW_Reference()

◆ WC()

◆ CW()

◆ SC()

◆ CS()

◆ WC_V()

◆ CW_V()

◆ WS_V()

◆ SW_V()

◆ PW_S()

◆ WP_S()

◆ PW_W()

◆ WP_W()

◆ ZSensitiveNear()

◆ ZSensitiveNearClipping()

◆ ZSensitiveFar()

◆ ZSensitiveFarClipping()

◆ ProjectPointOnLine()

◆ ProjectPointOnPlane()

◆ BackfaceCulling()

◆ GetProjection()

◆ GetStereoInfo()

◆ GetViewParameter()

◆ GetColorSpace()