#include <lib_sculpt.h>

Inheritance diagram for SculptObject:

[legend]

Detailed Description

A SculptObject is used to interact with the data referenced by a SculptTag.
The SculptTag on a PolygonObject references a SculptObject that is stored in a Scene Hook within the document.
When the SculptTag is deleted the referenced SculptObject is also deleted.

Public Member Functions
Int32	GetSubdivisionCount ()

PolygonObject *	GetPolygonCopy (Int32 subdivisionLevel, Bool includeTopLevels=true)

PolygonObject *	GetOriginalObject ()

const PolygonObject *	GetOriginalObject () const

PolygonObject *	GetDisplayPolygonObject ()

Bool	Hit (BaseDraw *bd, Float mx, Float my, Bool backfaces, SculptHitData &hitData)

Bool	Hit (const Vector &rayp, const Vector &rayv, Bool backfaces, SculptHitData &hitData)

Int32	GetPolygonCount ()

Int32	GetPointCount ()

SculptLayerBase *	GetCurrentLayer ()

Int32	GetCurrentLevel ()

UInt32	GetMemoryUsage ()

SculptLayer *	AddLayer ()

SculptFolder *	AddFolder ()

Bool	DeleteSelectedLayer ()

void	Update ()

const Vector32 *	GetVertexNormals ()

const Vector32 *	GetFaceNormals ()

const Vector *	GetPointR ()

Vector *	GetPointW ()

Bool	Subdivide ()

Bool	IncreaseSubdivisionLevel ()

Bool	DecreaseSubdivisionLevel ()

SculptLayerBase *	GetFirstLayer ()

SculptLayer *	GetBaseLayer ()

SculptLayerSystem *	GetLayerSystem ()

Bool	IsFrozen ()

void	SetFrozen (Bool value)

Bool	GetAllowDeformations ()

void	SetAllowDeformations (Bool value)

void	UpdateCollision ()

void	NeedCollisionUpdate (Bool fullUpdate=false)

void	OffsetPoint (SculptLayer pLayer, Vector pPoints, Bool useMask, Float strength, Int32 index, const Vector &offset, Bool respectLayerStrength=false)

void	OffsetPreviewPoint (SculptLayer *pLayer, Bool useMask, Float strength, Int32 index, const Vector &offset, Bool respectLayerStrength=false)

void	SetPreviewPoint (SculptLayer *pLayer, Bool useMask, Float strength, Int32 index, const Vector &offset, Bool respectLayerStrength=false)

void	StartUndo ()

void	EndUndo ()

void	Smooth (Int32 count, Bool respectMask)

Float32 *	GetMaskCache ()

Float32	PointPolysAverage (Int32 vertex, Float32 *values)

Vector	PointPolysAverage (Int32 vertex, Vector *values)

void	UpdateMask (Bool fullUpdate=false)

void	InitOpenGL (BaseDraw *bd=nullptr)

Bool	IsPointSelected (Int32 index)

Bool	IsPolygonSelected (Int32 index)

Bool	GetPolygon (Int32 index, CPolygon &cpoly)

Public Member Functions inherited from BaseList2D
void	SetBit (Int32 mask)

Bool	GetBit (Int32 mask) const

void	DelBit (Int32 mask)

void	ToggleBit (Int32 mask)

Int32	GetAllBits () const

void	SetAllBits (Int32 bits)

void	SetBitEx (Int32 mask, Int32 flags)

const Char *	GetViewportRenderId (VIEWPORT_RENDER_ID typeId) const

BaseList2D *	GetNext ()

const BaseList2D *	GetNext () const

BaseList2D *	GetPred ()

const BaseList2D *	GetPred () const

BaseContainer	GetData ()

void	SetData (const BaseContainer &bc, Bool add=true)

const BaseContainer &	GetDataInstanceRef () const

BaseContainer &	GetDataInstanceRef ()

const BaseContainer *	GetDataInstance () const

BaseContainer *	GetDataInstance ()

String	GetName () const

void	SetName (const maxon::String &name, Bool setDirty=true)

String	GetBubbleHelp ()

Bool	TransferGoal (BaseList2D *dst, Bool undolink)

Bool	TransferMarker (BaseList2D *dst) const

Bool	CopyDynamicDescriptionFrom (const BaseList2D *src)

Bool	Scale (Float scale)

Bool	Edit ()

void	GetIcon (IconData *dat)

GeListHead *	GetNLARoot (Bool create)

BaseList2D *	AnimationLayerRemap (BaseObject **layer=nullptr)

String	GetTypeName () const

BaseList2D *	GetMain () const

void	InsertTrackSorted (CTrack *track)

Bool	AddEventNotification (BaseList2D bl, NOTIFY_EVENT eventid, NOTIFY_EVENT_FLAG flags, const BaseContainer data)

Bool	RemoveEventNotification (const BaseDocument doc, BaseList2D bl, NOTIFY_EVENT eventid)

Bool	FindEventNotification (const BaseDocument doc, BaseList2D bl, NOTIFY_EVENT eventid)

Bool	SetDescIDState (const DescID &id, DESCIDSTATE descidstate)

DESCIDSTATE	GetDescIDState (const DescID &id, Bool tolerant) const

GeListHead *	GetOverrideRoot (Bool create)

BaseOverride *	GetFirstOverride ()

GeListHead *	GetShaderRepositoryRoot (Bool create)

GeListHead *	GetHiddenShaderRoot (Bool create)

maxon::NimbusForwardRef	GetNimbusRef (const maxon::Id &spaceId) const

maxon::Result< maxon::NimbusForwardRef >	PrivateGetOrCreateNimbusRef (const maxon::Id &spaceId)

void	RemoveNimbusRef (const maxon::Id &spaceId)

maxon::Result< maxon::HashMap< maxon::Id, maxon::NimbusForwardRef > >	GetAllNimbusRefs () const

Bool	IsNodeBased () const

maxon::Result< Bool >	GetAccessedObjects (METHOD_ID method, AccessedObjectsCallback &access) const

maxon::Result< Bool >	GetAccessedObjectsRec (ACCESSED_OBJECTS_MASK read, ACCESSED_OBJECTS_MASK write, METHOD_ID method, Bool withSiblings, Bool withChildren, AccessedObjectsCallback &access) const

maxon::Result< Bool >	GetAccessedObjectsOfHierarchy (ACCESSED_OBJECTS_MASK read, ACCESSED_OBJECTS_MASK write, METHOD_ID method, AccessedObjectsCallback &access) const

maxon::Result< Bool >	GetAccessedObjectsOfChildren (ACCESSED_OBJECTS_MASK read, ACCESSED_OBJECTS_MASK write, METHOD_ID method, AccessedObjectsCallback &access) const

maxon::Result< Bool >	GetAccessedObjectsOfFirstChildHierarchy (ACCESSED_OBJECTS_MASK read, ACCESSED_OBJECTS_MASK write, METHOD_ID method, AccessedObjectsCallback &access) const

maxon::Result< maxon::GenericData >	GroupChanges ()

void	GetMarkerStampEx (UInt32 l1, UInt32 l2)

const GeMarker &	GetMarker () const

void	SetMarker (const GeMarker &m)

Bool	AddUniqueID (Int32 appid, const Char *const mem, Int bytes)

Bool	FindUniqueID (Int32 appid, const Char *&mem, Int &bytes) const

Int32	GetUniqueIDCount () const

Bool	GetUniqueIDIndex (Int32 idx, Int32 &id, const Char *&mem, Int &bytes) const

Bool	SetAnimatedParameter (const CTrack *track, const DescID &id, const GeData &t_data1, const GeData &t_data2, Float mix, DESCFLAGS_SET flags)

Bool	GetAnimatedParameter (const DescID &id, GeData &t_data1, GeData &t_data2, Float &mix, DESCFLAGS_GET flags) const

BaseShader *	GetFirstShader () const

void	InsertShader (BaseShader shader, BaseShader pred=nullptr)

void	ClearKeyframeSelection ()

Bool	FindKeyframeSelection (const DescID &id)

Bool	SetKeyframeSelection (const DescID &id, Bool selection)

Bool	KeyframeSelectionContent ()

LayerObject *	GetLayerObject (const BaseDocument *doc)

const LayerObject *	GetLayerObject (const BaseDocument *doc) const

Bool	SetLayerObject (const LayerObject *layer)

const LayerData *	GetLayerData (const BaseDocument *doc, Bool rawdata=false) const

Bool	SetLayerData (BaseDocument *doc, const LayerData &data)

GeListHead *	GetCTrackRoot (Bool create)

const GeListHead *	GetCTrackRoot () const

CTrack *	GetFirstCTrack ()

const CTrack *	GetFirstCTrack () const

CTrack *	FindCTrack (const DescID &id)

const CTrack *	FindCTrack (const DescID &id) const

Public Member Functions inherited from GeListNode
GeListNode *	GetNext ()

const GeListNode *	GetNext () const

GeListNode *	GetPred ()

const GeListNode *	GetPred () const

GeListNode *	GetDown ()

const GeListNode *	GetDown () const

GeListNode *	GetUp ()

const GeListNode *	GetUp () const

GeListNode *	GetDownLast ()

const GeListNode *	GetDownLast () const

void	InsertBefore (GeListNode *bl)

void	InsertAfter (GeListNode *bl)

void	InsertUnder (GeListNode *bl)

void	InsertUnderLast (GeListNode *bl)

void	Remove ()

void	FlushChilds ()

void	MoveChildrenTo (GeListNode *dest)

GeListHead *	GetListHead ()

const GeListHead *	GetListHead () const

Int32	GetNodeID (Int32 index=0) const

template<typename CAST >
const CAST *	GetNodeData (Int32 index=0) const

template<typename CAST >
CAST *	GetNodeData (Int32 index=0)

void	SetCustomData (GeListNode *node)

GeListNode *	GetCustomData ()

const GeListNode *	GetCustomData () const

const BaseDocument *	GetDocument () const

BaseDocument *	GetDocument ()

maxon::Result< Bool >	GetBranchInfo (const maxon::ValueReceiver< const BranchInfo & > &info, GETBRANCHINFO flags) const

Bool	IsDocumentRelated () const

Int32	GetInfo () const

Bool	GetNBit (NBIT bit) const

UInt32	GetNBitMask (Int32 index) const

Bool	ChangeNBit (NBIT bit, NBITCONTROL bitmode)

Public Member Functions inherited from C4DAtom
Int32	GetType () const

Int32	GetRealType () const

Int32	GetDiskType () const

Bool	IsInstanceOf (Int32 id) const

Int32	GetClassification () const

Bool	Message (Int32 type, void *data=nullptr)

Bool	MultiMessage (MULTIMSG_ROUTE flags, Int32 type, void *data)

C4DAtom *	GetClone (COPYFLAGS flags, AliasTrans *trn) const

Bool	CopyTo (C4DAtom dst, COPYFLAGS flags, AliasTrans trn) const

Bool	Read (HyperFile *hf, Int32 id, Int32 level)

Bool	Write (HyperFile *hf) const

Bool	ReadObject (HyperFile *hf, Bool readheader)

Bool	WriteObject (HyperFile *hf) const

Bool	GetDescription (Description *description, DESCFLAGS_DESC flags) const

Bool	GetParameter (const DescID &id, GeData &t_data, DESCFLAGS_GET flags) const

Bool	SetParameter (const DescID &id, const GeData &t_data, DESCFLAGS_SET flags)

DynamicDescription *	GetDynamicDescriptionWritable ()

const DynamicDescription *	GetDynamicDescription () const

Bool	CopyDynamicDescriptionFrom (const BaseList2D *src)

Bool	GetEnabling (const DescID &id, const GeData &t_data, DESCFLAGS_ENABLE flags, const BaseContainer *itemdesc) const

Bool	TranslateDescID (const DescID &id, DescID &res_id, C4DAtom *&res_at)

UInt32	GetDirty (DIRTYFLAGS flags) const

void	SetDirty (DIRTYFLAGS flags)

UInt32	GetHDirty (HDIRTYFLAGS mask) const

void	SetHDirty (HDIRTYFLAGS mask)

Private Member Functions
	SculptObject ()

	~SculptObject ()

Additional Inherited Members
Static Public Member Functions inherited from BaseList2D
static BaseList2D *	Alloc (Int32 type)

static void	Free (BaseList2D *&bl)

Static Public Attributes inherited from BaseList2D
static const Int32	SETBIT_FLAG_NODIRTY

static const Int32	SETBIT_FLAG_REMOVE

Constructor & Destructor Documentation

◆ SculptObject()

SculptObject ( )

private

◆ ~SculptObject()

~SculptObject ( )

private

Member Function Documentation

◆ GetSubdivisionCount()

Int32 GetSubdivisionCount ( )

Gets the number of Subdivisions that the SculptObject currently has, i.e. how many times it has been subdivided by the user.

Returns: The number of subdivision levels.

◆ GetPolygonCopy()

PolygonObject* GetPolygonCopy	(	Int32	subdivisionLevel,
		Bool	includeTopLevels = `true`
	)

Gets a copy of the SculptObject at a specific subdivision level.

Note: The returned object does not contain a copy of the SculptTag.

Parameters

[in]	subdivisionLevel	The subdivision level to copy the PolyonObject at.
[in]	includeTopLevels	If True includes all the detail from any layers that are above subdivisionLevel. If false includes only the sculpting data for all layers up to and including the subdivisionLevel specified.

Returns: The PolygonObject for the subdivision level. The caller owns the pointed PolygonObject.

◆ GetOriginalObject() [1/2]

PolygonObject* GetOriginalObject ( )

Gets the original PolygonObject that the SculptTag is applied to.

Returns: The original PolygonObject that the SculptTag is applied to. The document owns the pointed PolygonObject.

◆ GetOriginalObject() [2/2]

const PolygonObject* GetOriginalObject ( ) const

Gets the original PolygonObject that the SculptTag is applied to.

Returns: The original PolygonObject that the SculptTag is applied to. The document owns the pointed PolygonObject.

◆ GetDisplayPolygonObject()

PolygonObject* GetDisplayPolygonObject ( )

Gets the PolygonObject that is currently being displayed in the viewport.

Note: In SculptBrushToolData::FloodSelectedLayer() calls this returns the same as GetOriginalObject() when sculpting on Polygon Objects that have no SculptTag.

Returns: The PolygonObject displayed in the viewport. This is the internal Polygon Object and should never be changed!

◆ Hit() [1/2]

Bool Hit	(	BaseDraw *	bd,
		Float	mx,
		Float	my,
		Bool	backfaces,
		SculptHitData &	hitData
	)

From a viewport cast a ray, in screen space, onto the SculptObject and return any data if the ray hits the object.

Note: Returns the closest hit point if multiple intersections are found.

Warning: To use the Hit() methods the mesh must be unfrozen and both NeedCollisionUpdate(true) and UpdateCollision() should be called to initialize the collision data.

Parameters

[in]	bd	The view that the user is casting the ray from. The caller owns the pointed view.
[in]	mx	The X coordinate (mouse coordinate) in screen space.
[in]	my	The Y coordinate (mouse coordinate) in screen space.
[in]	backfaces	true to allow back facing polygons to be hit tested. If enabled and the back facing hit point is closer than the front hit point, then it is returned.
[out]	hitData	Filled with the intersection data if the ray hits the object.

Returns: true if the SculptObject was hit, otherwise false.

◆ Hit() [2/2]

Bool Hit	(	const Vector &	rayp,
		const Vector &	rayv,
		Bool	backfaces,
		SculptHitData &	hitData
	)

Given a ray in object space do a hit intersection against the SculptObject and return any data if the ray hits the object.

Note: Returns the closest hit point if multiple intersections are found.

Warning: To use the Hit() methods the mesh must be unfrozen and both NeedCollisionUpdate(true) and UpdateCollision() should be called to initialize the collision data.

Parameters

[in]	rayp	The starting position of the ray in object space.
[in]	rayv	The direction the ray is pointing.
[in]	backfaces	true to allow back facing polygons to be hit tested. If enabled and the back facing hit point is closer than the front hit point, then it is returned.
[out]	hitData	Filled with the intersection data if the ray hits the object.

Returns: true if the SculptObject was hit, otherwise false.

◆ GetPolygonCount()

Int32 GetPolygonCount ( )

Gets the number of polygons at the current subdivision level.

Returns: The number of polygons.

◆ GetPointCount()

Int32 GetPointCount ( )

Gets the number of points at the current subdivision level.

Returns: The number of points.

◆ GetCurrentLayer()

SculptLayerBase* GetCurrentLayer ( )

Gets the currently selected layer, or folder, selected for the SculptObject.

Returns: The currently selected layer or folder.

◆ GetCurrentLevel()

Int32 GetCurrentLevel ( )

Gets the current subdivision level that the SculptObject is currently at.

Returns: The current subdivision level.

◆ GetMemoryUsage()

UInt32 GetMemoryUsage ( )

Gets the amount of memory currently used for the SculptObject. This does not include any memory used by OpenGL.

Returns: The memory used in bytes.

◆ AddLayer()

SculptLayer* AddLayer ( )

Creates a new layer on the SculptObject at the current subdivision level.

Returns: The added layer. The SculptObject owns the pointed SculptLayer.

◆ AddFolder()

SculptFolder* AddFolder ( )

Creates a new folder for the SculptObject.

Returns: The added folder. The SculptObject owns the pointed SculptFolder.

◆ DeleteSelectedLayer()

Bool DeleteSelectedLayer ( )

Deletes the currently selected layer (or folder) on the SculptObject (as specified in the Sculpt Layer Manager UI).

Note: If the currently selected layer is a folder then it will only delete the folder if all the layers that are contained in that folder are at the same subdivision level as the current subdivision level.

Returns: true if the layer was deleted, otherwise false.

◆ Update()

void Update ( )

Updates all the layers and the SculptObject.

◆ GetVertexNormals()

const Vector32* GetVertexNormals ( )

Gets the vertex normals for the PolygonObject at its current subdivision level.

Returns: The vertex normals.

◆ GetFaceNormals()

const Vector32* GetFaceNormals ( )

Gets the face normals for the PolygonObject at its current subdivision level.

Since: R17.032

Returns: The face normals.

◆ GetPointR()

const Vector* GetPointR ( )

Gets read only access to the points that will be used for the PolygonObject at its current subdivision level.

Returns: The points.

◆ GetPointW()

Vector* GetPointW ( )

Gets write access to the points that will be used for the display of the PolygonObject at the current subdivision level in the viewport.

Warning: This method should only be used with the call OffsetPoint(), which should only ever be called from SculptBrushToolData::FloodSelectedLayer().

Returns: The points.

◆ Subdivide()

Bool Subdivide ( )

Subdivides the SculptObject to the next level.

Warning: Only works if the SculptObject is already at the top most level and the memory limit (as specified in the preferences) has not been exceeded and also only if there is enough memory on the users computer to successfully do the subdivision.

Returns: true if the object was successfully subdivided, otherwise false.

◆ IncreaseSubdivisionLevel()

Bool IncreaseSubdivisionLevel ( )

Increases the subdivision level to the next highest level. If it is already at the top subdivision level then it will do nothing.

Returns: true if it was able go up a level, otherwise false.

◆ DecreaseSubdivisionLevel()

Bool DecreaseSubdivisionLevel ( )

Decreases the subdivision level to the down one level. If it is already at level 0 then it will do nothing.

Returns: true if it was able go down a level, otherwise false.

◆ GetFirstLayer()

SculptLayerBase* GetFirstLayer ( )

Gets the first layer under the SculptLayerSystem. This is usually the Base layer.

Returns: The first layer.

◆ GetBaseLayer()

SculptLayer* GetBaseLayer ( )

Gets the Base layer, which is the special layer that has multiple SculptLayerData children, one for each subdivision level, that allows the user to sculpt on while at any subdivision level.

Returns: The Base layer.

◆ GetLayerSystem()

SculptLayerSystem* GetLayerSystem ( )

Gets the layer system that contains all the layers. This is a child node of the SculptObject.

Returns: The layer system.

◆ IsFrozen()

Bool IsFrozen ( )

Checks if the SculptObject been frozen. In the UI this is shown in the SculpTag.

Returns: true if the object was frozen, otherwise false.

◆ SetFrozen()

void SetFrozen ( Bool value )

Sets the frozen state of the SculptObject. In the UI this is shown in the SculpTag.
When the object is frozen no changes to the SculptObject or any of its layers are allowed.

Note: If the PolygonObject has a PhongTag it will also become active when the SculptObject is Frozen.
When not Frozen then SculptObject uses its own internal Vertex Normals and disables the PhongTag on the PolygonObject.

Parameters

[in] value The frozen state.

◆ GetAllowDeformations()

Bool GetAllowDeformations ( )

Checks if the object is allowed to be deformed by any deformers. In the UI this is shown in the SculpTag.

Note: This option only works if the object is also Frozen. When both these options are enabled, any deformers that are children of the PolygonObject that the SculptTag is applied to, will be able to deform the object in the viewport.

Returns: true if the object was frozen, otherwise false.

◆ SetAllowDeformations()

void SetAllowDeformations ( Bool value )

Sets the "Allow Deformations" checkbox thereby allowing any deformers to have an effect on the display of the SculptObject, as long as it is also frozen.
In the UI this is shown in the SculpTag.

Parameters

[in] value The "Allow Deformations" state.

◆ UpdateCollision()

void UpdateCollision ( )

Updates any collision data after any changes to the SculptLayer Offsets have been made.

Warning: This is required before calling the Hit() methods.

◆ NeedCollisionUpdate()

void NeedCollisionUpdate ( Bool fullUpdate = false )

Tells the SculptObject that it requires a collision update before the user tries to use any of the Sculpt tools.
Then next time a user tries to use a tool it will first call UpdateCollision() to ensure that the Hit() calls will be correct.

Parameters

[in] fullUpdate true to update the full mesh, this is not always required.

◆ OffsetPoint()

void OffsetPoint	(	SculptLayer *	pLayer,
		Vector *	pPoints,
		Bool	useMask,
		Float	strength,
		Int32	index,
		const Vector &	offset,
		Bool	respectLayerStrength = `false`
	)

Offsets a point on the layer when when the interactive flood operation has finished. This is called on the SculptObject by the Sculpt tools.

Warning: Should only be called from within SculptBrushToolData::FloodSelectedLayer().

Parameters

[in]	pLayer	The SculptLayer that the brush is operating on.
[in]	pPoints	The points from the call to GetPoints() which are used to directly effect the drawing of the SculptObject in the viewport.
[in]	useMask	true to respect the Mask on the Layer or not.
[in]	strength	The strength of the SculptLayer.
[in]	index	The index of the point on the PolygonObject for the current subdivision level.
[in]	offset	The offset to apply to the preview layer.
[in]	respectLayerStrength	true to respect the strength of the layer or ignore it updating the mesh on screen.

◆ OffsetPreviewPoint()

void OffsetPreviewPoint	(	SculptLayer *	pLayer,
		Bool	useMask,
		Float	strength,
		Int32	index,
		const Vector &	offset,
		Bool	respectLayerStrength = `false`
	)

Adds to the value of the offset on the preview layer when used to do interactive flood updates on the SculptObject by the Sculpt tools.

Warning: Should only be called from within SculptBrushToolData::FloodSelectedLayer().

Parameters

[in]	pLayer	The SculptLayer that the brush is operating on.
[in]	useMask	true to respect the Mask on the Layer or not.
[in]	strength	The strength of the SculptLayer.
[in]	index	The index of the point on the PolygonObject for the current subdivision level.
[in]	offset	The offset to apply to the preview layer.
[in]	respectLayerStrength	true to respect the strength of the layer or ignore it updating the mesh on screen.

◆ SetPreviewPoint()

void SetPreviewPoint	(	SculptLayer *	pLayer,
		Bool	useMask,
		Float	strength,
		Int32	index,
		const Vector &	offset,
		Bool	respectLayerStrength = `false`
	)

Sets the value of the offset on the preview layer when used to do interactive flood updates on the SculptObject by the Sculpt tools.

Warning: Should only be called from within SculptBrushToolData::FloodSelectedLayer()

Parameters

[in]	pLayer	The SculptLayer that the brush is operating on.
[in]	useMask	true to respect the Mask on the Layer or not.
[in]	strength	The strength of the SculptLayer.
[in]	index	The index of the point on the PolygonObject for the current subdivision level.
[in]	offset	The offset to set on the preview layer.
[in]	respectLayerStrength	true to respect the strength of the layer or ignore it updating the mesh on screen.

◆ StartUndo()

void StartUndo ( )

Calls before any calls to AddOffset(), SetOffset(), AddToMask() or SetMask() to be undone.

Warning: This will only work if making changes to a single layer. Changes to multiple layers or layers at different levels is not allowed.
This must be done at the current subdivision level of the layer being changed for these calls to work properly.
EndUndo() must be called after all calls to the above methods have been done.
This must NEVER be called by a Sculpt brush during a stroke.

◆ EndUndo()

void EndUndo ( )

Must be called after StartUndo() once all the point and masks have been changed on the layers.

Warning: This must NEVER be called by a Sculpt brush during a stroke.

◆ Smooth()

void Smooth	(	Int32	count,
		Bool	respectMask
	)

Smooths the SculptObject and applies the offsets to the currently selected layer.

Parameters

[in]	count	The number of times to run the smooth algorithm.
[in]	respectMask	If true it will not smooth any masked out points, if false it will apply it to every point.

◆ GetMaskCache()

Float32* GetMaskCache ( )

Gets the current mask values for the PolygonObject.
The number of points returned is equal to the number of points on the PolygonObject.

Returns: The mask values.

◆ PointPolysAverage() [1/2]

Float32 PointPolysAverage	(	Int32	vertex,
		Float32 *	values
	)

Averages out the values for the vertex on the PolygonObject.

Parameters

[in]	vertex	The vertex number on the PolygonObject to get the average value for.
[in]	values	The values to average out. This must contain the same number of values as there are points on the PolygonObject.

Returns: The mask values.

◆ PointPolysAverage() [2/2]

Vector PointPolysAverage	(	Int32	vertex,
		Vector *	values
	)

Averages out the values for the vertex on the PolygonObject.

Parameters

[in]	vertex	The vertex number on the PolygonObject to get the average value for.
[in]	values	The values to average out. This must contain the same number of values as there are points on the PolygonObject.

Returns: The mask values.

◆ UpdateMask()

void UpdateMask ( Bool fullUpdate = false )

Updates the mask on the SculptObject.

Parameters

[in] fullUpdate true to force a full update of the mask.

◆ InitOpenGL()

void InitOpenGL ( BaseDraw * bd = nullptr )

Private.
Initializes the SculptObject for the given viewport in OpenGL use.

Parameters

[in] bd The viewport that is being updated. If it is nullptr then the currently active view will be used.

◆ IsPointSelected()

Bool IsPointSelected ( Int32 index )

Determines if a point should be moved or not in the SculptBrushToolData::FloodSelectedLayer() method.

Note: When in Point mode, and there is a selection, it returns true if a point is selected or false if the point is not selected.
If there are no points selected it returns true. When in Polygon mode, and there is a selection, it returns true if a point on any of the selected polygons is selected or false if there is no point selected.
If there are no polygons selected it returns true.

Warning: This method only works when the selected object being sculpted on is by a tool and is a PolygonObject without a SculptTag.
It returns false in all other cases.

Parameters

[in] index The index of the point on the object: 0<= index < GetPointCount()

Returns: true if the point was selected, otherwise false.

◆ IsPolygonSelected()

Bool IsPolygonSelected ( Int32 index )

Determines if a polygon should be moved or not in the SculptBrushToolData::FloodSelectedLayer() method.

Note: When in Polygon mode, and there is a selection, it returns true if a point on any of the selected polygons is selected or false if there is no point selected.
If there are no polygons selected it returns true.

Warning: This method only works when the selected object being sculpted on is by a tool and is a PolygonObject without a SculptTag.
It returns false in all other cases.

Parameters

[in] index The index of the polygon on the object: 0<= index < GetPolygonCount()

Returns: true if the polygon was selected, otherwise false.

◆ GetPolygon()

Bool GetPolygon	(	Int32	index,
		CPolygon &	cpoly
	)

Gets the polygon data at the given index.

Parameters

[in]	index	The index of the polygon on the object: 0<= index < GetPolygonCount()
[out]	cpoly	Filled with the polygon data.

Returns: True if the polygon was found, false if not.

Detailed Description

Public Member Functions

Private Member Functions

Additional Inherited Members

Constructor & Destructor Documentation

◆ SculptObject()

◆ ~SculptObject()

Member Function Documentation

◆ GetSubdivisionCount()

◆ GetPolygonCopy()

◆ GetOriginalObject() [1/2]

◆ GetOriginalObject() [2/2]

◆ GetDisplayPolygonObject()

◆ Hit() [1/2]

◆ Hit() [2/2]

◆ GetPolygonCount()

◆ GetPointCount()

◆ GetCurrentLayer()

◆ GetCurrentLevel()

◆ GetMemoryUsage()

◆ AddLayer()

◆ AddFolder()

◆ DeleteSelectedLayer()

◆ Update()

◆ GetVertexNormals()

◆ GetFaceNormals()

◆ GetPointR()

◆ GetPointW()

◆ Subdivide()

◆ IncreaseSubdivisionLevel()

◆ DecreaseSubdivisionLevel()

◆ GetFirstLayer()

◆ GetBaseLayer()

◆ GetLayerSystem()

◆ IsFrozen()

◆ SetFrozen()

◆ GetAllowDeformations()

◆ SetAllowDeformations()

◆ UpdateCollision()

◆ NeedCollisionUpdate()

◆ OffsetPoint()

◆ OffsetPreviewPoint()

◆ SetPreviewPoint()

◆ StartUndo()

◆ EndUndo()

◆ Smooth()

◆ GetMaskCache()

◆ PointPolysAverage() [1/2]

◆ PointPolysAverage() [2/2]

◆ UpdateMask()

◆ InitOpenGL()

◆ IsPointSelected()

◆ IsPolygonSelected()

◆ GetPolygon()