Classes
class	ParserCache

class	Parser

struct	SerialInfo

class	Registry

class	LassoSelection

class	DebugTimer

Macros
#define	NEWPARSERERROR_BADSTRING

#define	NEWPARSERERROR_BADEXECUTION

#define	NEWPARSERERROR_MEMORYERROR

#define	NEWPARSERERROR_NUMBERERROR

#define	UNIT_NONE

#define	UNIT_KM

#define	UNIT_M

#define	UNIT_CM

#define	UNIT_MM

#define	UNIT_UM

#define	UNIT_NM

#define	UNIT_MILE

#define	UNIT_YARD

#define	UNIT_FEET

#define	UNIT_INCH

#define	ANGLE_DEG

#define	ANGLE_RAD

#define	COREMSG_CINEMA

#define	COREMSG_CINEMA_GETMACHINEFEATURES

#define	DRAWPORT_TYPE_AVAILABLE

#define	DRAWPORT_EXTENSION_STRING

#define	DRAWPORT_SUPPORT_ENHANCED

#define	DRAWPORT_RENDERER_NAME

#define	DRAWPORT_VERSION_STRING

#define	DRAWPORT_VENDOR_NUM

#define	DRAWPORT_VENDOR_UNKNOWN

#define	DRAWPORT_VENDOR_NVIDIA

#define	DRAWPORT_VENDOR_AMD

#define	DRAWPORT_VENDOR_INTEL

#define	DRAWPORT_VENDOR_APPLE

#define	DRAWPORT_VENDOR_NAME

#define	DRAWPORT_SHADING_LANGUAGE_VERSION_STRING

#define	DRAWPORT_MULTITEXTURE

#define	DRAWPORT_MAX_2DTEXTURE_SIZE

#define	DRAWPORT_MAX_3DTEXTURE_SIZE

#define	DRAWPORT_MAX_VERTEX_ATTRIBS

#define	DRAWPORT_MAX_TEX_IMAGE_UNITS_VERTEX

#define	DRAWPORT_MAX_TEX_IMAGE_UNITS_FRAGMENT

#define	DRAWPORT_DRIVER_VERSION_STRING

#define	DRAWPORT_FBO_Z_DEPTH

#define	DRAWPORT_FRAMEBUFFER_OBJECT_MULTISAMPLE

#define	DRAWPORT_MAX_TEX_IMAGE_UNITS_GEOMETRY

#define	DRAWPORT_API_VERSION_INT

#define	DRAWPORT_SHADING_LANGUAGE_VERSION_INT

#define	DRAWPORT_RENDERBUFFER_MASK

#define	DRAWPORT_RENDER_TO_FP16_TEXTURE

#define	DRAWPORT_RENDER_TO_FP32_TEXTURE

#define	DRAWPORT_STEREO_BUFFER

#define	DRAWPORT_DRIVER_OUTDATED

#define	DRAWPORT_SUPPORT_PRIMITIVERESTARTINDEX

#define	DRAWPORT_SUPPORT_GEOMETRYSHADER

#define	DRAWPORT_SUPPORT_OSX_10_7

#define	DRAWPORT_MAX_TEX_IMAGE_UNITS_TESS_CONTROL

#define	DRAWPORT_MAX_TEX_IMAGE_UNITS_TESS_EVAL

#define	DRAWPORT_MAX_TESSELLATION_LEVEL

#define	DRAWPORT_API_TYPE

#define	DRAWPORT_VRAM_SIZE

#define	DRAWPORT_REQUIRED_VERSION_STRING

#define	MACHINEINFO_OSTYPE

#define	MACHINEINFO_OSVERSION

#define	MACHINEINFO_PROCESSORTYPE

#define	MACHINEINFO_PROCESSORNAME

#define	MACHINEINFO_PROCESSORFEATURES

#define	MACHINEINFO_NUMBEROFPROCESSORS

#define	MACHINEINFO_MACHINEMODEL

#define	MACHINEINFO_COMPUTERNAME

#define	MACHINEINFO_USERNAME

#define	MACHINEINFO_PROCESSORSPEED_MHZ

#define	MACHINEINFO_C4DBUILDID

#define	MACHINEINFO_C4DTYPE

#define	MACHINEINFO_PROCESSORHTCOUNT

#define	MACHINEINFO_PHYSICAL_RAM_SIZE

#define	MACHINEINFO_LOADEDPLUGINS

#define	C4D_MEMORY_STAT_MEMORY_INUSE

#define	C4D_MEMORY_STAT_MEMORY_PEAK

#define	C4D_MEMORY_STAT_NO_OF_ALLOCATIONS_TOTAL

#define	C4D_MEMORY_STAT_NO_OF_ALLOCATIONS_CURRENT

#define	C4D_MEMORY_STAT_EOGL_TEXBUFFER

#define	C4D_MEMORY_STAT_EOGL_VERTEXBUFFER

#define	C4D_MEMORY_STAT_LOWMEMCNT

#define	C4D_MEMORY_STAT_EOGL_VERTEXBUFFER_CNT

#define	C4D_MEMORY_STAT_EOGL_TEXTUREBUFFER_CNT

#define	C4D_MEMORY_STAT_OPENGL_ALLOCATED

#define	C4D_MEMORY_STAT_OPENGL_USED

#define	SHORTCUT_PLUGINID

#define	SHORTCUT_ADDRESS

#define	SHORTCUT_OPTIONMODE

#define	CLIPBOARDOWNER_BODYPAINT

#define	CLIPBOARDOWNER_PICTUREVIEWER

Typedefs
typedef maxon::Tuple< maxon::Url, Bool >	TexturePathTuple

typedef maxon::BaseArray< TexturePathTuple >	TexturePathList

Enumerations
enum class	MACHINEFEATURESTYPE { CURRENT , HARDWARE_OGL }

Functions
maxon::String	GeGetUserName ()

VERSIONTYPE	GeGetVersionType ()

maxon::Result< void >	GetGeneralLicensingInformation (maxon::String &productId, maxon::String &systemId, maxon::String &userId, maxon::String &licenseId, maxon::String &userName)

maxon::Result< maxon::String >	ExportLicenses ()

maxon::Result< void >	AddLicenseItem (const maxon::InternedId &licenseItemId, Float versionNumber, Bool checkOnly, maxon::CustomLicenseItemDelegate &&licenseUpdateCallback)

maxon::Bool	CheckLicenseFeature (const maxon::InternedId &featureId)

Bool	HasFullFeatureSet ()

Bool	IsNet ()

Bool	IsServer ()

Bool	IsClient ()

void	GeShowMouse (Int32 v)

Bool	GeGetScreenDimensions (Int32 x, Int32 y, Bool whole_screen, Int32 sx1, Int32 sy1, Int32 sx2, Int32 sy2)

Int32	GeGetTimer ()

Float64	GeGetMilliSeconds ()

String	GeGetLineEnd ()

Int32	GeGetDefaultFPS ()

UInt32	GeGetCinemaInfo (CINEMAINFO info)

GEMB_R	GeOutString (const maxon::String &str, GEMB flags)

OPERATINGSYSTEM	GeGetCurrentOS ()

BYTEORDER	GeGetByteOrder ()

void	GeGetGray (Int32 r, Int32 g, Int32 *b)

Bool	GeChooseColor (Vector *col, Int32 flags)

Bool	GeChooseColorAlpha (maxon::ColorA *col, Int32 flags)

Bool	GeOpenHTML (const maxon::String &webaddress)

Bool	GeChooseFont (BaseContainer *bc)

void	GeGetGuiFont (maxon::OSFontDefinition &out)

void	GeGetMonoFont (maxon::OSFontDefinition &out)

Bool	GeRegisterPlugin (PLUGINTYPE type, Int32 id, const maxon::String &str, void *data, Int32 datasize)

void	GePrint (const maxon::String &str)

void	GeConsoleOut (const maxon::String &str)

Bool	GeGetMovieInfo (const Filename &fn, Int32 frames, Float fps)

Bool	RenameDialog (String *str)

Int32	GetC4DVersion ()

String	GeGetDegreeChar ()

String	GeGetPercentChar ()

void	SetMousePointer (Int32 l)

Bool	ShowBitmap (const Filename &fn)

Bool	ShowBitmap (BaseBitmap *bm)

void	StopAllThreads ()

void	StopDrawViewsThread ()

Bool	ShutdownThreads (Bool shutdown)

void	SpecialEventAdd (Int32 messageid, UInt p1=0, UInt p2=0)

void	EventAdd (EVENT eventflag=EVENT::NONE)

Bool	GeSyncMessage (Int32 messageid, Int32 destid=0, UInt p1=0, UInt p2=0)

Bool	DrawViews (DRAWFLAGS flags, BaseDraw *bd=nullptr)

Bool	SendModelingCommand (Int32 command, ModelingCommandData &data)

maxon::Result< TexturePathList >	GetGlobalTexturePaths (const Filename *docPath)

maxon::Result< void >	SetGlobalTexturePaths (const TexturePathList &paths)

Bool	GenerateTexturePath (const Filename &docpath, const Filename &srcname, const Filename &suggestedfolder, Filename dstname, NetRenderService service=nullptr, BaseThread *bt=nullptr)

Bool	IsInSearchPath (const Filename &texfilename, const Filename &docpath)

void	FlushTexture (const Filename &docpath, const maxon::String &name, const Filename &suggestedfolder)

void	FlushUnusedTextures ()

BaseContainer	GetWorldContainer ()

BaseContainer *	GetWorldContainerInstance ()

void	GetAdditionalWorldContainerData (BaseContainer &bc)

maxon::Result< maxon::BaseArray< maxon::Url > >	GetRecentDocumentsList (Bool isBodyPaint)

maxon::Id	GetActiveNodeSpaceId ()

void	SaveWorldPreferences ()

void	SetWorldContainer (const BaseContainer &bc)

Vector	GetViewColor (Int32 colid, Vector *defaultColor=nullptr)

void	SetViewColor (Int32 colid, const Vector &col)

void	ErrorStringDialog (CHECKVALUERANGE type, Float x, Float y, CHECKVALUEFORMAT is)

Bool	ReadPluginInfo (Int32 pluginid, void *buffer, Int32 size)

Bool	WritePluginInfo (Int32 pluginid, void *buffer, Int32 size)

Bool	ReadRegInfo (Int32 pluginid, void *buffer, Int32 size)

Bool	WriteRegInfo (Int32 pluginid, void *buffer, Int32 size)

BaseContainer *	GetWorldPluginData (Int32 id)

Bool	SetWorldPluginData (Int32 id, const BaseContainer &bc, Bool add=true)

BaseContainer *	GetToolPluginData (BaseDocument *doc, Int32 id)

Bool	GeIsActiveToolEnabled ()

ToolPlugin *	GetActiveTool ()

Bool	GeGetLanguage (Int32 index, maxon::String extension, maxon::String name, Bool *default_language)

Filename	GeFilterSetSuffix (const Filename &name, Int32 id)

IDENTIFYFILE	GeIdentifyFile (const Filename &name, UChar probe, Int32 probesize, IDENTIFYFILE recognition, BasePlugin *bp)

GeListHead *	GetScriptHead (Int32 type)

Int32	GetDynamicScriptID (BaseList2D *bl)

void	SetActiveScriptObject (Int32 type)

BaseList2D *	CreateNewPythonScript (String &name, const String &body)

BaseList2D *	LoadPythonScript (const Filename &fn)

Bool	GetCommandLineArgs (C4DPL_CommandLineArgs &args)

String	GetObjectName (Int32 type)

String	GetTagName (Int32 type)

Int32	GetObjectType (const maxon::String &name)

Int32	GetTagType (const maxon::String &name)

Bool	GeRegistryAdd (Int32 sub_id, REGISTRYTYPE main_id, void *data)

Bool	GeRegistryRemove (Int32 sub_id, REGISTRYTYPE main_id)

Registry *	GeRegistryFind (Int32 sub_id, REGISTRYTYPE main_id)

Registry *	GeRegistryGetLast (REGISTRYTYPE main_id)

Registry *	GeRegistryGetFirst (REGISTRYTYPE main_id)

Bool	GeRegistryGetAutoID (Int32 *id)

Bool	GePluginMessage (Int32 id, void *data)

Bool	CheckIsRunning (CHECKISRUNNING type)

String	GeGetDefaultFilename (Int32 id)

void	FindInManager (BaseList2D *bl)

void	GeSleep (Int32 milliseconds)

Bool	GeIsMainThread ()

Bool	GeIsMainThreadAndNoDrawThread ()

void	_GeDebugBreak (Int32 line, const Char *file)

void	GeDebugOut (const Char *s,...)

void	GeDebugOut (const maxon::String &s)

GeData	SendCoreMessage (Int32 coreid, const BaseContainer &msg, Int32 eventid=0)

String	GetMacModel (const maxon::String &machinemodel)

enum MACHINEFEATURESTYPE	MAXON_ENUM_LIST (MACHINEFEATURESTYPE)

BaseContainer	GetMachineFeatures (MACHINEFEATURESTYPE type=MACHINEFEATURESTYPE::HARDWARE_OGL)

Bool	GeGetMemoryStat (BaseContainer &stat)

Bool	PopupEditText (Int32 screenx, Int32 screeny, Int32 width, Int32 height, const maxon::String &changeme, maxon::Delegate< void(POPUPEDITTEXTCALLBACK, maxon::String &)> func)

void	StartEditorRender (Bool active_only, Bool raybrush, Int32 x1, Int32 y1, Int32 x2, Int32 y2, BaseThread bt, BaseDraw bd, Bool newthread)

String	FormatNumber (const GeData &val, Int32 format, Int32 fps, Bool bUnit=true)

GeData	StringToNumber (const maxon::String &text, Int32 format, Int32 fps, const LENGTHUNIT *lengthunit=nullptr)

void	CallCommand (Int32 id, Int32 subid=0)

String	GetCommandName (Int32 id)

String	GetCommandHelp (Int32 id)

Bool	IsCommandEnabled (Int32 id)

Bool	IsCommandChecked (Int32 id)

Bool	GetSystemEnvironmentVariable (const maxon::String &varname, maxon::String &result)

Bool	AskForAdministratorPrivileges (const maxon::String &msg, const maxon::String &caption, Bool allowsuperuser, void **token)

void	EndAdministratorPrivileges ()

void	RestartApplication (const Utf16Char param=nullptr, Int32 exitcode=0, const Utf16Char *path=nullptr)

void	SetExitCode (Int32 exitCode)

void	GeUpdateUI ()

VIEWPORTTYPE	GeGetActiveViewportType ()

Int32	GetShortcutCount ()

BaseContainer	GetShortcut (Int32 index)

Bool	AddShortcut (const BaseContainer &bc)

Bool	RemoveShortcut (Int32 index)

Bool	LoadShortcutSet (const Filename &fn, Bool add)

Bool	SaveShortcutSet (const Filename &fn)

Int32	FindShortcutsFromID (Int32 pluginid, Int32 *indexarray, Int32 maxarrayelements)

Int32	FindShortcuts (const BaseContainer &scut, Int32 *idarray, Int32 maxarrayelements)

Bool	CheckCommandShortcut (Int32 id, Int32 key, Int32 qual)

void	InsertCreateObject (BaseDocument doc, BaseObject op, BaseObject *activeobj=nullptr)

void	CopyToClipboard (const maxon::String &text)

void	CopyToClipboard (BaseBitmap *map, Int32 ownerid)

Bool	GetStringFromClipboard (String *txt)

Bool	GetBitmapFromClipboard (BaseBitmap *map)

CLIPBOARDTYPE	GetClipboardType ()

Int32	GetC4DClipboardOwner ()

const BaseBitmap *	GetCursorBitmap (Int32 type, Int32 &hotspotx, Int32 &hotspoty)

Bool	CodeEditor_Open (BaseList2D obj, const maxon::Delegate< GeData(BaseList2D obj, const BaseContainer &msg)> &callback, const BaseContainer &bc=BaseContainer())

void	MinimalViewportSettingsCommand (Int32 type)

Bool	IsAnimationRunning (const BaseDocument *document)

Bool	IsUVToolMode (const BaseDocument *document)

Int32	GetFormatDepth (Int32 format, Int32 depth)

Variables
	CURRENT

	HARDWARE_OGL

class DebugTimer	MAXON_ENUM_LIST

Swap/Intel/Motorola Conversions
void	lSwap (void *adr, Int cnt=1)

void	wSwap (void *adr, Int cnt=1)

void	lIntel (void *adr, Int cnt=1)

void	wIntel (void *adr, Int cnt=1)

void	lMotor (void *adr, Int cnt=1)

void	wMotor (void *adr, Int cnt=1)

void	llSwap (void *adr, Int cnt=1)

void	llIntel (void *adr, Int cnt=1)

void	llMotor (void *adr, Int cnt=1)

Background Handler
void	GeAddBackgroundHandler (BackgroundHandler handler, void tdata, Int32 typeclass, Int32 priority)

Bool	GeRemoveBackgroundHandler (void *tdata, Int32 typeclass)

Bool	GeStopBackgroundThreads (Int32 typeclass, BACKGROUNDHANDLERFLAGS flags, BaseThread *thread)

Bool	GeCheckBackgroundThreadsRunning (Int32 typeclass, Bool all)

Status
void	StatusClear ()

void	StatusSetSpin ()

void	StatusSetBar (Int32 p)

void	StatusSetText (const maxon::String &str)

void	StatusNetClear ()

void	StatusSetNetLoad (STATUSNETSTATE status)

void	StatusSetNetBar (Int32 p, const GeData &dat)

void	StatusSetNetText (const maxon::String &str)

Typedef Documentation

◆ TexturePathTuple

typedef maxon::Tuple<maxon::Url, Bool> TexturePathTuple

◆ TexturePathList

typedef maxon::BaseArray<TexturePathTuple> TexturePathList

Function Documentation

◆ GeGetUserName()

maxon::String GeGetUserName ( )

Returns the name of the user registered in the active account.

Returns: The user name.

◆ GeGetVersionType()

VERSIONTYPE GeGetVersionType ( )

Retrieves the type of Cinema 4D application that is running.

Returns: The version type: VERSIONTYPE

◆ GetGeneralLicensingInformation()

maxon::Result<void> GetGeneralLicensingInformation	(	maxon::String &	productId,
		maxon::String &	systemId,
		maxon::String &	userId,
		maxon::String &	licenseId,
		maxon::String &	userName
	)

Returns information about the currently used license and system.

Parameters

[out]	productId	The product id of the active license.
[out]	systemId	A unique system identifier.
[out]	userId	The user id that the active license is assigned with.
[out]	licenseId	A unique license session identifier.
[out]	userName	The user / account name that the active license is assigned with.

Returns: OK on success.

◆ ExportLicenses()

maxon::Result<maxon::String> ExportLicenses ( )

Returns licensing information as shown in the ExportLicenses menu command including productId, systemId, userId etc.

Returns: OK on success.

◆ AddLicenseItem()

maxon::Result<void> AddLicenseItem	(	const maxon::InternedId &	licenseItemId,
		Float	versionNumber,
		Bool	checkOnly,
		maxon::CustomLicenseItemDelegate &&	licenseUpdateCallback
	)

Private. AddLicenseItem adds extra licenses to query for each license check. This allows to verify extra features bundled with the app.

Parameters

[in]	licenseItemId	Id to check.
[in]	versionNumber	Current version number of the feature. '0' if no version number is required.
[in]	checkOnly	True if the license should only checked for availability. In that case the license will not be consumed and displayed only in error case.
[in]	licenseUpdateCallback	Callback which will be triggered with each license update for this type.

Returns: OK on success.

◆ CheckLicenseFeature()

maxon::Bool CheckLicenseFeature ( const maxon::InternedId & featureId )

CheckLicenseFeature queries certain license features. This includes predefined is as well as license items added with AddLicenseItem().

Parameters

[in] featureId Id to check. e.g. ENTITLEMENTFEATURES::ISBETA

Returns: OK on success.

◆ HasFullFeatureSet()

Bool HasFullFeatureSet ( )

Determines whether the type of Cinema 4D application has no feature limitations. Certain editions like C4D Lite do not allow for all features.

Returns: true if If all features are available., otherwise false.

◆ IsNet()

Bool IsNet ( )

Checks if either a NET server or client application is running.

Returns: true if NET is running, otherwise false.

◆ IsServer()

Bool IsServer ( )

Checks if a NET server application is running.

Returns: true if NET is running as server, otherwise false.

◆ IsClient()

Bool IsClient ( )

Checks if a NET client application is running.

Returns: true if NET is running as client, otherwise false.

◆ GeShowMouse()

void GeShowMouse ( Int32 v )

Sets the type of mouse pointer.

Warning: Should only be called from the main thread.

Parameters

[in] v The mouse pointer: MOUSE

◆ GeGetScreenDimensions()

Bool GeGetScreenDimensions	(	Int32	x,
		Int32	y,
		Bool	whole_screen,
		Int32 *	sx1,
		Int32 *	sy1,
		Int32 *	sx2,
		Int32 *	sy2
	)

Retrieves the screen dimensions in pixels.

Parameters

[in]	x	The screen X coordinates to identify which display information is read (for multi-display setups).
[in]	y	The screen Y coordinates to identify which display information is read (for multi-display setups).
[in]	whole_screen	true if dimensions of the whole screen (including task bar etc.) are returned, otherwise false.
[out]	sx1	Assigned the minimum X coordinate (left).
[out]	sy1	Assigned the minimum Y coordinate (top).
[out]	sx2	Assigned the maximum X coordinate (right).
[out]	sy2	Assigned the maximum Y coordinate (bottom).

Returns: true if successful, otherwise false.

◆ GeGetTimer()

Int32 GeGetTimer ( )

Retrieves the current timer count in milliseconds.

Returns: The current timer count in milliseconds.

◆ GeGetMilliSeconds()

Float64 GeGetMilliSeconds ( )

Get the current timer count in milliseconds.

Returns: The current timer count in milliseconds.

◆ GeGetLineEnd()

String GeGetLineEnd ( )

Retrieves a string that contains the type of line ending characters for the running OS.

Returns: The type of line ending.

◆ GeGetDefaultFPS()

Int32 GeGetDefaultFPS ( )

Retrieves the default frames per second.

Returns: The default FPS value.

◆ GeGetCinemaInfo()

UInt32 GeGetCinemaInfo ( CINEMAINFO info )

Retrieves information about Cinema 4D's application runtime.

Parameters

[in] info The information type: CINEMAINFO

Returns: The Cinema 4D's information.

◆ GeOutString()

GEMB_R GeOutString	(	const maxon::String &	str,
		GEMB	flags
	)

Displays a message box with the string as the text.

Parameters

[in]	str	The dialog box message.
[in]	flags	The flags: GEMB

Returns: The result from the message box: GEMB_R

◆ GeGetCurrentOS()

OPERATINGSYSTEM GeGetCurrentOS ( )

Retrieves the type of OS that is running Cinema 4D.

Returns: The OS running: OPERATINGSYSTEM

◆ GeGetByteOrder()

BYTEORDER GeGetByteOrder ( )

Retrieves the byte order for the platform that Cinema 4D is running on.

Returns: The byte order: BYTEORDER

◆ GeGetGray()

void GeGetGray	(	Int32 *	r,
		Int32 *	g,
		Int32 *	b
	)

Retrieves the color values for the default Cinema 4D gray.

Parameters

[out]	r	Assigned the red component of the gray color.
[out]	g	Assigned the green component of the gray color.
[out]	b	Assigned the blue component of the gray color.

◆ GeChooseColor()

Bool GeChooseColor	(	Vector *	col,
		Int32	flags
	)

Opens a color chooser dialog for the user to select a color.

Parameters

[in,out]	col	The initial color for the dialog and assigned the chosen color.
[in]	flags	Usually 0 or one of the following flags to use the correct color profile for display: DR_COLORFIELD_ICC_BASEDOC or DR_COLORFIELD_ICC_BPTEX.

Returns: true if successful, otherwise false.

◆ GeChooseColorAlpha()

Bool GeChooseColorAlpha	(	maxon::ColorA *	col,
		Int32	flags
	)

Opens a color chooser dialog for the user to select a color with alpha.

Parameters

[in,out]	col	The initial color for the dialog and assigned the chosen color.
[in]	flags	Usually 0 or one of the following flags to use the correct color profile for display: DR_COLORFIELD_ICC_BASEDOC or DR_COLORFIELD_ICC_BPTEX.

Returns: true if successful, otherwise false.

◆ GeOpenHTML()

Bool GeOpenHTML ( const maxon::String & webaddress )

Opens a URL in the user's default web browser.

Note: The passed URL string has to be spec conform, see IETF - Uniform Resource Locators.

Parameters

[in] webaddress The URL to open.

Returns: true if successful, otherwise false.

◆ GeChooseFont()

Bool GeChooseFont ( BaseContainer * bc )

Opens a font chooser dialog for the user to select a font.

Parameters

[in] bc Assigned the selected font settings.

Returns: true if a new font was chosen, otherwise false.

◆ GeGetGuiFont()

void GeGetGuiFont ( maxon::OSFontDefinition & out )

Internal. Returns the c4d UI font.

◆ GeGetMonoFont()

void GeGetMonoFont ( maxon::OSFontDefinition & out )

Internal. Returns the c4d monospaced font.

◆ GeRegisterPlugin()

Bool GeRegisterPlugin	(	PLUGINTYPE	type,
		Int32	id,
		const maxon::String &	str,
		void *	data,
		Int32	datasize
	)

Deprecated. Use the individual functions for each plugin type instead.
See Plugin Types.

◆ GePrint()

void GePrint ( const maxon::String & str )

Outputs a string to the Cinema 4D console window. This routine is deprecated - use maxon::Application instead, which has an improved interface.

Parameters

[in] str The string to display in the console window.

◆ GeConsoleOut()

void GeConsoleOut ( const maxon::String & str )

Outputs a string to the Cinema 4D debug console window.
This reoutine is deprecated - use maxon::DiagnosticOutput instead, which has an improved interface. See Debug Information.

Parameters

[in] str The string to display in the debug console window.

◆ GeGetMovieInfo()

Bool GeGetMovieInfo	(	const Filename &	fn,
		Int32 *	frames,
		Float *	fps
	)

Retrieves information from a movie file.

Parameters

[in]	fn	The filename of the movie file to retrieve the information from.
[out]	frames	Assigned the number of frames.
[out]	fps	Assigned the number of frames per second.

Returns: true if successful, otherwise false.

◆ RenameDialog()

Bool RenameDialog ( String * str )

Opens a standard rename dialog.

Parameters

[in,out] str The string with the name to change. Assigned the new name. The caller owns the pointed string.

Returns: true if the name was changed, otherwise false.

◆ GetC4DVersion()

Int32 GetC4DVersion ( )

Retrieves the version of Cinema 4D that is running.

Returns: The version of Cinema 4D.

◆ GeGetDegreeChar()

String GeGetDegreeChar ( )

Retrieves the degree character (°).

Returns: A string containing the degree character.

◆ GeGetPercentChar()

String GeGetPercentChar ( )

Retrieves the percent character (%).

Returns: A string containing the percent character.

◆ lSwap()

void lSwap	(	void *	adr,
		Int	cnt = `1`
	)

Swaps the bytes of Int values. (Converting between big endian and little endian.)

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ wSwap()

void wSwap	(	void *	adr,
		Int	cnt = `1`
	)

Swaps the low and high bytes of UInt values. (Converting between big endian and little endian.)

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ lIntel()

void lIntel	(	void *	adr,
		Int	cnt = `1`
	)

Convert Int values to Intel format. If already in Intel (i.e on a PC) the values remain unchanged.

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ wIntel()

void wIntel	(	void *	adr,
		Int	cnt = `1`
	)

Converts UInt values to Intel format. If already in Intel (i.e on a PC) the values remain unchanged.

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ lMotor()

void lMotor	(	void *	adr,
		Int	cnt = `1`
	)

Converts Int values to Motorola format. If already in Motorola (i.e on a Mac) the values remain unchanged.

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ wMotor()

void wMotor	(	void *	adr,
		Int	cnt = `1`
	)

Convert UInt values to Motorola format. If already in Motorola (i.e on a Mac) then the values remain unchanged.

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ llSwap()

void llSwap	(	void *	adr,
		Int	cnt = `1`
	)

Swaps the bytes of Int64 values. (Converting between big endian and little endian.)

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ llIntel()

void llIntel	(	void *	adr,
		Int	cnt = `1`
	)

Converts Int64 values to Intel format. If already in Intel (i.e on a PC) the values remain unchanged.

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ llMotor()

void llMotor	(	void *	adr,
		Int	cnt = `1`
	)

Converts Int64 values to Motorola format. If already in Motorola (i.e on a Mac) the values remain unchanged.

Parameters

[in]	adr	The address of the memory. The caller owns the pointed memory buffer or variable at adr.
[in]	cnt	The number of elements in the memory buffer at adr (1 for a single element or variable).

◆ GeAddBackgroundHandler()

void GeAddBackgroundHandler	(	BackgroundHandler *	handler,
		void *	tdata,
		Int32	typeclass,
		Int32	priority
	)

Adds a background handler with the given typeclass and priority. Remove it with GeRemoveBackgroundHandler().
A background handler is a hook that Cinema 4D processes when idle.
The advantage over a regular thread or timer is that it always will be called at a certain position. As a result it will not block other Cinema 4D operations (noticeable slowdown).
Cinema 4D itself uses background handler for example to redraw the view if it was stopped, to render material previews, to update the material preview in AM & MM, to draw the ants in BodyPaint 3D etc.

Warning: Background handlers must only be used if you know exactly what you are doing. They need to be thoroughly tested since a bug introduced can mess up the whole application's behavior.

Parameters

[in]	handler	The background handler.
[in]	tdata	The private data. This will be passed on to the handler.
[in]	typeclass	A unique plugin ID. Must be obtained from http://www.plugincafe.com There can be many handlers with the same class as long as they have different tdata.
[in]	priority	The handler priority. Higher absolute values are evaluated before lower. A negative value means that it does not block positive priorities. Examples: #define BACKGROUNDHANDLER_PRIORITY_RENDERACTIVEMATERIAL 5000 #define BACKGROUNDHANDLER_PRIORITY_REDRAWVIEW 4000 #define BACKGROUNDHANDLER_PRIORITY_RENDERINACTIVEMATERIALS 3000 #define BACKGROUNDHANDLER_PRIORITY_RENDEREXTERNAL -1000 #define BACKGROUNDHANDLER_PRIORITY_REDRAWANTS -2000 #define BACKGROUNDHANDLER_PRIORITY_PREVIEWCACHE 6000 #define BACKGROUNDHANDLER_PRIORITY_PREVIEWCACHE_ANIMATION 2000 #define BACKGROUNDHANDLER_PRIORITY_PREVIEWCACHE_ASYNC 3500 The external render thread (output window) does not block the editor display. However, if e.g. an inactive material is being rendered the view will not be redrawn until the other thread finishes.

◆ GeRemoveBackgroundHandler()

Bool GeRemoveBackgroundHandler	(	void *	tdata,
		Int32	typeclass
	)

Removes background handlers added with GeAddBackgroundHandler().

Parameters

[in]	tdata	The registered data.
[in]	typeclass	The registered type class ID.

Returns: true if successful, otherwise false.

◆ GeStopBackgroundThreads()

Bool GeStopBackgroundThreads	(	Int32	typeclass,
		BACKGROUNDHANDLERFLAGS	flags,
		BaseThread *	thread
	)

Stops all running background threads of the given typeclass. If typeclass==0 all threads are stopped.

Parameters

[in]	typeclass	The type class ID to stop, or 0 for all classes.
[in]	flags	If typeclass is BACKGROUNDHANDLER_TYPECLASS_C4D then the flags have the following meaning:: BACKGROUNDHANDLERFLAGS For own type classes define flags as needed, they will be routed to the background handler function. For example `GeStopBackgroundThreads(BACKGROUNDHANDLER_TYPECLASS_C4D, BACKGROUNDHANDLER_FLAGS_EDITORRENDDER)` will only stop the editor renderer (if it was running). `GeStopBackgroundThreads(0, BACKGROUNDHANDLERFLAGS::SHUTDOWN)` will kill anything running.
[in]	thread	Optional thread or nullptr. If passed the return value can be false if the thread is stopped while it is trying to acquire the resources for this call.

◆ GeCheckBackgroundThreadsRunning()

Bool GeCheckBackgroundThreadsRunning	(	Int32	typeclass,
		Bool	all
	)

Checks if any of the background threads matching typeclass is running. If typeclass==0 all threads are checked.
For example GeCheckBackgroundThreadsRunning(BACKGROUNDHANDLER_TYPECLASS_C4D, true) checks if Cinema 4D is doing anything right now.
If all=false was passed it would not check for the external renderer and ants (which are always running in a BodyPaint 3D selection).

Parameters

[in]	typeclass	The type class ID to check, or 0 for all classes.
[in]	all	If true, negative priorities are also checked.

Returns: true if the specified background threads are running, otherwise false.

◆ SetMousePointer()

void SetMousePointer ( Int32 l )

Sets the type of mouse pointer.

Parameters

[in] l The mouse pointer: MOUSE

◆ ShowBitmap() [1/2]

Bool ShowBitmap ( const Filename & fn )

Displays a bitmap into the Picture Viewer.

Warning: Must be called from the main thread.

Parameters

[in] fn The filename of the bitmap to display.

Returns: true if successful, otherwise false.

◆ ShowBitmap() [2/2]

Bool ShowBitmap ( BaseBitmap * bm )

Displays a bitmap into the Picture Viewer.

Note: The bitmap will be copied for display.

Warning: Must be called from the main thread.

Parameters

[in] bm The bitmap to display.

Returns: true if successful, otherwise false.

◆ StopAllThreads()

void StopAllThreads ( )

Stops all running threads.

Note: Be sure to call this routine always when a document is modified asynchronously.

◆ StopDrawViewsThread()

void StopDrawViewsThread ( )

Stops all draw views thread.

Note: Be sure to call this routine always when a document is modified asynchronously.

◆ ShutdownThreads()

Bool ShutdownThreads ( Bool shutdown )

Private.

◆ StatusClear()

void StatusClear ( )

Clears the status bar text.

◆ StatusSetSpin()

void StatusSetSpin ( )

Sets the status bar progress bar spinning. Needs to be triggered for every spin step.
Use this to indicate that a plugin is still processing even if the progress bar is not increasing.

◆ StatusSetBar()

void StatusSetBar ( Int32 p )

Sets the status bar progress bar.

Parameters

[in] p The percentage of the progress (0-100).

◆ StatusSetText()

void StatusSetText ( const maxon::String & str )

Sets the status bar text.

Parameters

[in] str The text to display.

◆ StatusNetClear()

void StatusNetClear ( )

Clears the NET status bar text.

Warning: Reserved for Team Render and should not be used externally.

◆ StatusSetNetLoad()

void StatusSetNetLoad ( STATUSNETSTATE status )

Sets the NET status bar to status state.

Warning: Reserved for Team Render and should not be used externally.

Parameters

[in] status The NET status state: STATUSNETSTATE

◆ StatusSetNetBar()

void StatusSetNetBar	(	Int32	p,
		const GeData &	dat
	)

Sets the NET status bar progress and custom color.

Warning: Reserved for Team Render and should not be used externally.

Parameters

[in]	p	The percentage of the progress (0-100).
[in]	dat	The color for the NET status bar. Can be a color constant COLOR_BG, COLOR_TEXT, etc. or a color Vector.

◆ StatusSetNetText()

void StatusSetNetText ( const maxon::String & str )

Sets the NET status bar text.

Warning: Reserved for Team Render and should not be used externally.

Parameters

[in] str The text to display.

◆ SpecialEventAdd()

void SpecialEventAdd	(	Int32	messageid,
		UInt	p1 = `0`,
		UInt	p2 = `0`
	)

Adds a custom event. Results in a CoreMessage().

See also: The article Core Messages for more information.

Parameters

[in]	messageid	The message ID. A unique plugin ID. Must be obtained from http://www.plugincafe.com Use a unique plugin ID to make sure that there is no collision.
[in]	p1	The first private data for the sent message.
[in]	p2	The second private data for the sent message.

◆ EventAdd()

void EventAdd ( EVENT eventflag = EVENT::NONE )

Adds a global event to Cinema 4D's event queue. Results in a CoreMessage().

See also: The article Core Messages for more information.

Parameters

[in] eventflag The event to add: EVENT

◆ GeSyncMessage()

Bool GeSyncMessage	(	Int32	messageid,
		Int32	destid = `0`,
		UInt	p1 = `0`,
		UInt	p2 = `0`
	)

Sends a synchronous event message (for example to make the Timeline, Timeslider etc. do an instant redraw).

Parameters

[in]	messageid	The synchronous message to send: EVMSG
[in]	destid	Private.
[in]	p1	Private.
[in]	p2	Private.

Returns: true if successful, otherwise false.

◆ DrawViews()

Bool DrawViews	(	DRAWFLAGS	flags,
		BaseDraw *	bd = `nullptr`
	)

Redraws the editor views.

Note: Cannot be used while a modal dialog is open.

Warning: Must be called from the main thread.

Parameters

[in]	flags	The draw flags: DRAWFLAGS
[in]	bd	The view to redraw when DRAWFLAGS::ONLY_BASEDRAW is set in flags.

Returns: true if successful, otherwise false.

◆ SendModelingCommand()

Bool SendModelingCommand	(	Int32	command,
		ModelingCommandData &	data
	)

Sends a modeling command.
Examples:

ModelingCommandData cd;
cd.doc = doc;
cd.op = op;
if (!SendModelingCommand(MCOMMAND_CURRENTSTATETOOBJECT, cd)) return false;
res = static_cast<BaseObject*>(cd.result->GetIndex(0));

BaseContainer bc;
bc.SetFloat(MDATA_SPLINE_CHAMFERRADIUS, 100.0);
ModelingCommandData cd;
cd.doc = doc;
cd.bc = &bc;
cd.op = op;
if (!SendModelingCommand(MCOMMAND_SPLINE_CHAMFER, cd)) return false;

Note: It is usually not possible to use SendModelingCommand() during ModifyObject() or similarly functions.
The object needs to be cloned (or put into a different document). The problem is that SendModelingCommand() rebuilds the caches, invalidating all the view caches.

Parameters

[in]	command	There are several groups of IDs to use. First there are the internal modeling commands: (IDs are for ModelingCommandData::bc.) MCOMMAND Then there are the modeling library tool IDs, look up the parameters in the resource files: ModelingToolsParameters Finally there are the modeling library menu commands. (These have no parameters.) ModelingToolsNoParameters
[in]	data	The data for the command. Can be filled with the result for some commands.

Returns: true if the command was executed, otherwise false.

◆ GetGlobalTexturePaths()

maxon::Result<TexturePathList> GetGlobalTexturePaths ( const Filename * docPath )

Retrieves the global texture paths.

Parameters

[in] docPath The path of the document. This will be used to complete relative texture paths.
Pass nullptr if you want to get the unmodified paths only.

Returns: The global texture paths for Cinema 4D.

◆ SetGlobalTexturePaths()

maxon::Result<void> SetGlobalTexturePaths ( const TexturePathList & paths )

Sets the global texture paths.

◆ GenerateTexturePath()

Bool GenerateTexturePath	(	const Filename &	docpath,
		const Filename &	srcname,
		const Filename &	suggestedfolder,
		Filename *	dstname,
		NetRenderService *	service = `nullptr`,
		BaseThread *	bt = `nullptr`
	)

Generates the texture filename for a given texture image.

Parameters

[in]	docpath	The filename of the document for the texture.
[in]	srcname	The filename of the image.
[in]	suggestedfolder	A suggested folder path for the image. Can be an empty Filename.
[out]	dstname	Assigned the generated path.
[in]	service	An optional NET render service for the operation. The caller owns the pointed service.
[in]	bt	An optional thread for the operation. The caller owns the pointed thread.

Returns: true if successful, otherwise false.

◆ IsInSearchPath()

Bool IsInSearchPath	(	const Filename &	texfilename,
		const Filename &	docpath
	)

Checks if the texture texfilename is in the search path for files located in docpath.

Note: The function only performs string comparisons between texfilename and docpath.

Parameters

[in]	texfilename	The texture file name.
[in]	docpath	The document path.

Returns: true if the texture file is in the search path, otherwise false.

◆ FlushTexture()

void FlushTexture	(	const Filename &	docpath,
		const maxon::String &	name,
		const Filename &	suggestedfolder
	)

Flushes the given texture.

Parameters

[in]	docpath	The filename of the document with the texture.
[in]	name	The name of the texture to flush.
[in]	suggestedfolder	A suggested folder path for the image. Can be an empty Filename.

◆ FlushUnusedTextures()

void FlushUnusedTextures ( )

Flushes all unused textures.

◆ GetWorldContainer()

BaseContainer GetWorldContainer ( )

Retrieves the main Cinema 4D settings container.

Returns: The main Cinema 4D settings: WPREF

◆ GetWorldContainerInstance()

BaseContainer* GetWorldContainerInstance ( )

Retrieves the main Cinema 4D settings container that can be changed directly.

Note: There are a few settings that are transferred to the world container within the call GetWorldContainer(), for example WPREF_UNITS_BASIC to WPREF_COLOR_SYSTEM_COLORCHOOSER::
These settings cannot be set using GetWorldContainerInstance(). To read only these values, use GetAdditionalWorldContainerData.

Returns: The main Cinema 4D settings: WPREF

◆ GetAdditionalWorldContainerData()

void GetAdditionalWorldContainerData ( BaseContainer & bc )

Gets additional world container data (see GetWorldContainerInstance).

Parameters

[out] bc A container which receives the data. the container is not cleared before data is written.

◆ GetRecentDocumentsList()

maxon::Result<maxon::BaseArray<maxon::Url> > GetRecentDocumentsList ( Bool isBodyPaint )

Retrieves the recent documents list.

Parameters

[in] isBodyPaint Set to reteive BodyPaint's list.

Returns: The recent documents list.

◆ GetActiveNodeSpaceId()

maxon::Id GetActiveNodeSpaceId ( )

Returns the active node space. This is a program-wide global UI setting.

Returns: The Id of the current node space.

◆ SaveWorldPreferences()

void SaveWorldPreferences ( )

Saves the main Cinema 4D preferences.

◆ SetWorldContainer()

void SetWorldContainer ( const BaseContainer & bc )

Sets the main Cinema 4D settings container.
See GetWorldContainer() for values.

Parameters

[in] bc The settings container.

◆ GetViewColor()

Vector GetViewColor	(	Int32	colid,
		Vector *	defaultColor = `nullptr`
	)

Retrieves a main Cinema 4D color.

Parameters

[in]	colid	The color ID to get: VIEWCOLOR
[in]	defaultColor	Pass a valid pointer to get the default color.

Returns: The color value.

◆ SetViewColor()

void SetViewColor	(	Int32	colid,
		const Vector &	col
	)

Sets one of the main Cinema 4D colors.

Parameters

[in]	colid	The color ID to set: VIEWCOLOR
[in]	col	The new color.

◆ ErrorStringDialog()

void ErrorStringDialog	(	CHECKVALUERANGE	type,
		Float	x,
		Float	y,
		CHECKVALUEFORMAT	is
	)

Displays an error dialog for incorrectly entered values.

Parameters

[in]	type	The check value range type: CHECKVALUERANGE
[in]	x	The lowest value.
[in]	y	The highest value.
[in]	is	The values type: CHECKVALUEFORMAT

◆ ReadPluginInfo()

Bool ReadPluginInfo	(	Int32	pluginid,
		void *	buffer,
		Int32	size
	)

Reads private serial information for a plugin. Cinema 4D will store this data encrypted.

Parameters

[in]	pluginid	A unique plugin ID. Must be obtained from http://www.plugincafe.com
[in]	buffer	The buffer to take the data.
[in]	size	The size of the buffer. This must not exceed 3500.

Returns: true if successful, otherwise false.

◆ WritePluginInfo()

Bool WritePluginInfo	(	Int32	pluginid,
		void *	buffer,
		Int32	size
	)

Parameters

[in]	pluginid	A unique plugin ID. Must be obtained from http://www.plugincafe.com
[in]	buffer	The buffer with the data.
[in]	size	The size of the buffer. This must not exceed 3500.

Returns: true if successful, otherwise false.

◆ ReadRegInfo()

Bool ReadRegInfo	(	Int32	pluginid,
		void *	buffer,
		Int32	size
	)

Reads user-specific data (e.g. login data for a user account).

Note: Use this method instead of ReadPluginInfo() in a license server environment.

Parameters

[in]	pluginid	A unique plugin ID. Must be obtained from http://www.plugincafe.com
[in]	buffer	The data buffer. The caller owns the pointed buffer.
[in]	size	The buffer size.

Returns: true if successful, otherwise false.

◆ WriteRegInfo()

Bool WriteRegInfo	(	Int32	pluginid,
		void *	buffer,
		Int32	size
	)

Writes user-specific data (e.g. login data for a user account).

Note: Use this method instead of WritePluginInfo() in a license server environment.

Parameters

[in]	pluginid	A unique plugin ID. Must be obtained from http://www.plugincafe.com
[in]	buffer	The data buffer. The caller owns the pointed buffer.
[in]	size	The buffer size.

Returns: true if successful, otherwise false.

◆ GetWorldPluginData()

BaseContainer* GetWorldPluginData ( Int32 id )

Retrieves a container stored with SetWorldPluginData() from the Cinema 4D preferences.

Note: This can be used by any plugin to store preferences.

Parameters

[in] id The plugin ID that the container was stored with.

Returns: The retrieved container. Cinema 4D owns the pointed container.

◆ SetWorldPluginData()

Bool SetWorldPluginData	(	Int32	id,
		const BaseContainer &	bc,
		Bool	add = `true`
	)

Stores a container in the Cinema 4D preferences.

Note: This can be used by any plugin to store preferences.

Parameters

[in]	id	The plugin ID that the container should be associated with.
[in]	bc	The container to set.
[in]	add	If true, the container values are merged with the ones currently stored for the ID. Otherwise the previous values are lost.

Returns: true if successful, otherwise false.

◆ GetToolPluginData()

BaseContainer* GetToolPluginData	(	BaseDocument *	doc,
		Int32	id
	)

Retrieves a tool plugin container stored in a document.

Parameters

[in]	doc	The document. The caller owns the pointed document.
[in]	id	The tool plugin ID.

Returns: The retrieved tool plugin container.

◆ GeIsActiveToolEnabled()

Bool GeIsActiveToolEnabled ( )

Checks if the active tool is ghosted.

Returns: true if the active tool is not ghosted, otherwise false.

◆ GetActiveTool()

ToolPlugin* GetActiveTool ( )

Gets the active tool. Private.

Since: R19

Returns: The active tool.

◆ GeGetLanguage()

Bool GeGetLanguage	(	Int32	index,
		maxon::String *	extension,
		maxon::String *	name,
		Bool *	default_language
	)

Enumerates information about the available languages.
Start with index==0 and then iterate with index++ until the function returns false.

Parameters

[in]	index	The language index.
[out]	extension	Assigned the language extension.
[out]	name	Assigned the human readable language name.
[out]	default_language	Assigned true if this is the default language, otherwise false.

Returns: true if there was a language at index, otherwise false.

◆ GeFilterSetSuffix()

Filename GeFilterSetSuffix	(	const Filename &	name,
		Int32	id
	)

Sets the standard suffix of a given bitmap saver plugin.
e.g. if name is "C:\test" and id is 1106 (Photoshop PSD) then the returned Filename will be "C:\test.psd".

Parameters

[in]	name	The filename.
[in]	id	The ID of the bitmap saver plugin.

Returns: The given file name with the concatenated suffix.

◆ GeIdentifyFile()

IDENTIFYFILE GeIdentifyFile	(	const Filename &	name,
		UChar *	probe,
		Int32	probesize,
		IDENTIFYFILE	recognition,
		BasePlugin **	bp
	)

Identifies the file in name.

Parameters

[in]	name	The file to check.
[in]	probe	The start of a small chunk of data from the start of the file for testing this file type. Usually the probe size is 1024 bytes. The caller owns the pointed data.
[in]	probesize	The size of the probe array.
[in]	recognition	The identification flags: IDENTIFYFILE
[in]	bp	For image formats this is filled with a pointer to the image loader that was identified.

Returns: The identification result: IDENTIFYFILE

◆ GetScriptHead()

GeListHead* GetScriptHead ( Int32 type )

Retrieves the list head for scripts (ID_COFFEESCRIPT).

Parameters

[in] type Currently 0 is user scripts and 1 is system scripts.
The user scripts are located in library/scripts whereas system scripts are in resource/scripts.)

Returns: The script list head. Cinema 4D owns the pointed list head.

◆ GetDynamicScriptID()

Int32 GetDynamicScriptID ( BaseList2D * bl )

Retrieves the dynamic ID of the ID_COFFEESCRIPT script bl.
Every script gets a dynamic ID when loaded, which is just like a regular plugin ID.
This is necessary in many parts of the program. It is only when loading and saving the scripts that the unique (script) names are used; the ID is created dynamically at loading time.

Parameters

[in] bl The script to get the ID for. The caller owns the pointed script.

Returns: The dynamic script ID.

◆ SetActiveScriptObject()

void SetActiveScriptObject ( Int32 type )

Define the script to be displayed in the Script Manager.

Parameters

[in] type The script ID. Retrieve it with GetDynamicScriptID.

◆ CreateNewPythonScript()

BaseList2D* CreateNewPythonScript	(	String &	name,
		const String &	body
	)

Create a new temporary python script.

Parameters

[in,out]	name	The script name. Pass an empty string to automatically generated one.
[in]	body	The script content.

Returns: The created python script. Can be nullptr if creation failed.

◆ LoadPythonScript()

BaseList2D* LoadPythonScript ( const Filename & fn )

Load a python script.

Parameters

[in] fn The script name. Pass an empty filename to automatically generated one.

Returns: The loaded python script. Can be nullptr if loading failed.

◆ GetCommandLineArgs()

Bool GetCommandLineArgs ( C4DPL_CommandLineArgs & args )

Retrieves the command line arguments used to start Cinema 4D in args.

Note: Linux only.

Parameters

[in] args Filled with the command line arguments.

Returns: true if the command line arguments could be retrieved, otherwise false.

◆ GetObjectName()

String GetObjectName ( Int32 type )

Retrieves a user presentable name from an object type ID. For example GetObjectName(Onull) returns "Null".

Parameters

[in] type An object type ID.

Returns: The object name for type.

◆ GetTagName()

String GetTagName ( Int32 type )

Retrieves a user presentable name from a tag type ID.

Parameters

[in] type A tag type ID.

Returns: The tag name for type.

◆ GetObjectType()

Int32 GetObjectType ( const maxon::String & name )

The inverse of GetObjectName(). Returns an object type from an object name.

Parameters

[in] name An object name.

Returns: The object type for name.

◆ GetTagType()

Int32 GetTagType ( const maxon::String & name )

The inverse of GetTagName(). Returns a tag type from a tag name.

Parameters

[in] name A tag name.

Returns: The tag type for name.

◆ GeRegistryAdd()

Bool GeRegistryAdd	(	Int32	sub_id,
		REGISTRYTYPE	main_id,
		void *	data
	)

Private.

◆ GeRegistryRemove()

Bool GeRegistryRemove	(	Int32	sub_id,
		REGISTRYTYPE	main_id
	)

Private.

◆ GeRegistryFind()

Registry* GeRegistryFind	(	Int32	sub_id,
		REGISTRYTYPE	main_id
	)

Private.

◆ GeRegistryGetLast()

Registry* GeRegistryGetLast ( REGISTRYTYPE main_id )

Private.

◆ GeRegistryGetFirst()

Registry* GeRegistryGetFirst ( REGISTRYTYPE main_id )

Private.

◆ GeRegistryGetAutoID()

Bool GeRegistryGetAutoID ( Int32 * id )

Private.

◆ GePluginMessage()

Bool GePluginMessage	(	Int32	id,
		void *	data
	)

Sends a plugin message to other plugins. These messages can be received with PluginMessage(). The message is sent to all plugin modules.

Parameters

[in]	id	The ID of the message.
[in]	data	The message data. It is highly recommended as caller to own the pointed object and to not rely on the receiver to take the ownership.

Returns: true if the message could be sent, otherwise false.

◆ CheckIsRunning()

Bool CheckIsRunning ( CHECKISRUNNING type )

Checks if a task is running.

Parameters

[in] type The task: CHECKISRUNNING

Returns: true if the task running, otherwise false.

◆ GeGetDefaultFilename()

String GeGetDefaultFilename ( Int32 id )

Retrieves the default filename for a category.
In the following example the name DEFAULTFILENAME_SHADER_VOLUME is placed in front of the shader name, placing the material in the Shader category:

RegisterMaterialPlugin(Mmy, GeGetDefaultFilename(DEFAULTFILENAME_SHADER_VOLUME)+String("MyMaterial"), 0, MyClass::Alloc, "Mmy", 0);

GeGetDefaultFilename

String GeGetDefaultFilename(Int32 id)

RegisterMaterialPlugin

Bool RegisterMaterialPlugin(Int32 id, const maxon::String &str, Int32 info, DataAllocator *g, const maxon::String &description, Int32 disklevel)

String

Definition: c4d_string.h:39

DEFAULTFILENAME_SHADER_VOLUME

#define DEFAULTFILENAME_SHADER_VOLUME

Volume.

Definition: ge_prepass.h:4820

Parameters

[in] id The category ID: DEFAULTFILENAME_SHADER

Returns: The filename to prepend to the material name.

◆ FindInManager()

void FindInManager ( BaseList2D * bl )

Finds and makes bl visible in its manager.

Parameters

[in] bl The object to find. The caller owns the pointed object.

◆ GeSleep()

void GeSleep ( Int32 milliseconds )

Sleeps for milliseconds ms. Deprecated. Do not use for idle loops. Wait()/GetResult() for condition variables/jobs/threads must be used.

Parameters

[in] milliseconds The time to sleep in milliseconds.

◆ GeIsMainThread()

Bool GeIsMainThread ( )

Checks if code is run from within the main thread of Cinema 4D.

Returns: true if called from the main thread, otherwise false.

◆ GeIsMainThreadAndNoDrawThread()

Bool GeIsMainThreadAndNoDrawThread ( )

Checks if code is run from within the main thread of Cinema 4D and if the main thread does not execute any drawing code currently.

Since: R16.038

Note: This routine can be used to make sure that no illegal code is called during a drawing operation.
In Cinema 4D the drawing will be started threaded or non-threaded, depending on the situation.
It is not allowed to add e.g. undos or delete objects or materials while the drawing is in progress (this would lead to immediate crashes).
If your code calls other routines that are not aware of their context (e.g. some code within a Message that does not know whether it was called from a drawing thread or during a command call)
GeIsMainThreadAndNoDrawThread() can be used to detect the correct situation.

Returns: true if called from the main thread and main thread does not execute a drawing operation, otherwise false.

◆ _GeDebugBreak()

void _GeDebugBreak	(	Int32	line,
		const Char *	file
	)

Private.

◆ GeDebugOut() [1/2]

void GeDebugOut	(	const Char *	s,
			...
	)

Prints a string to the debug console using vsprintf() syntax.

Note: Requires that the API is build in debug mode i.e. MAXON_TARGET_DEBUG is defined.

Parameters

[in] s The string to print. Limited to 2048 characters.
Following parameters are format for vsprintf().

◆ GeDebugOut() [2/2]

void GeDebugOut ( const maxon::String & s )

Prints a string to the debug console.

Note: Requires that the API is build in debug mode i.e. MAXON_TARGET_DEBUG is defined.

Parameters

[in] s The string to print. Limited to 2048 characters.

◆ SendCoreMessage()

GeData SendCoreMessage	(	Int32	coreid,
		const BaseContainer &	msg,
		Int32	eventid = `0`
	)

Sends a core message.

See also: The article Core Messages for more information.

Examples:

// Check if command id is enabled
BaseContainer msg(COREMSG_CINEMA_GETCOMMANDENABLED);
msg.SetInt32(COREMSG_CINEMA_GETCOMMANDENABLED, id);
Bool enabled = SendCoreMessage(COREMSG_CINEMA, msg, 0).GetInt32();

// Get the machine features
GeData data = SendCoreMessage(COREMSG_CINEMA, BaseContainer(COREMSG_CINEMA_GETMACHINEFEATURES), 0);
BaseContainer* bc = data.GetContainer();

// Execute an editor command
BaseContainer msg(COREMSG_CINEMA_EXECUTEEDITORCOMMAND);
msg.SetInt32(COREMSG_CINEMA_EXECUTEEDITORCOMMAND, id);
msg.SetInt32(COREMSG_CINEMA_EXECUTESUBID, subid);
SendCoreMessage(COREMSG_CINEMA, msg, 0);

// Execute the options dialog of an editor command
BaseContainer msg(COREMSG_CINEMA_EXECUTEEDITORCOMMAND);
msg.SetInt32(COREMSG_CINEMA_EXECUTEEDITORCOMMAND, cmdID);
msg.SetInt32(COREMSG_CINEMA_EXECUTESUBID, subID);
msg.SetInt32(COREMSG_CINEMA_EXECUTEOPTIONMODE, true); // true to open the options dialog
SendCoreMessage(COREMSG_CINEMA, msg, 0);

Parameters

[in]	coreid	The core message ID: COREMSG_CINEMA.
[in]	msg	The message container: COREMSG
[in]	eventid	The event ID.

Returns: The data.

◆ GetMacModel()

String GetMacModel ( const maxon::String & machinemodel )

On a Mac GetMachineFeatures().GetString(MACHINEINFO_MACHINEMODEL) returns the model name which is set in the OS like "iMac4,1" or "MacBookPro8,2".
If this string is pass to GetMacModel() a much more human readable string like "iMac Intel Core 2 Duo (aluminum enclosure) (Mid 2007)" or "MacBook Pro Intel Core i5, Intel Core i7, 13 (Early 2011)".

Parameters

[in] machinemodel The machine model returned by GetMachineFeatures().GetString(MACHINEINFO_MACHINEMODEL).

Returns: The Mac model.

◆ GetMachineFeatures()

BaseContainer GetMachineFeatures ( MACHINEFEATURESTYPE type = MACHINEFEATURESTYPE::HARDWARE_OGL )

Retrieves the features of the computer.

Parameters

[in] type The machine features type: MACHINEFEATURESTYPE
Since R18.

Returns: The container with the machine features:
MACHINEINFO
OPENGL

◆ GeGetMemoryStat()

Bool GeGetMemoryStat ( BaseContainer & stat )

Retrieves Cinema 4D memory statistics.

Parameters

[in] stat Assigned the memory statistics: C4D_MEMORY_STAT

Returns: true if successful, otherwise false.

◆ PopupEditText()

Bool PopupEditText	(	Int32	screenx,
		Int32	screeny,
		Int32	width,
		Int32	height,
		const maxon::String &	changeme,
		maxon::Delegate< void(POPUPEDITTEXTCALLBACK, maxon::String &)>	func
	)

Opens a small popup window at (screenx, screeny) where the user can edit the changeme string. The result is reported to the func callback.

Parameters

[in]	screenx	The X screen coordinate of the window.
[in]	screeny	The Y screen coordinate of the window.
[in]	width	The width of the window.
[in]	height	The height of the window.
[in,out]	changeme	The string to change.
[in]	func	The callback function.

Returns: true if the popup edit text could be opened, otherwise false.

◆ StartEditorRender()

void StartEditorRender	(	Bool	active_only,
		Bool	raybrush,
		Int32	x1,
		Int32	y1,
		Int32	x2,
		Int32	y2,
		BaseThread *	bt,
		BaseDraw *	bd,
		Bool	newthread
	)

Starts the editor renderer.

Parameters

[in]	active_only	true for active object only.
[in]	raybrush	true for ray brush mode.
[in]	x1	The X coordinate of the first corner of the render rectangle.
[in]	y1	The Y coordinate of the first corner of the render rectangle.
[in]	x2	The X coordinate of the second corner of the render rectangle.
[in]	y2	The Y coordinate of the second corner of the render rectangle.
[in]	bt	The thread for the operation. The caller owns the pointed thread.
[in]	bd	The view to draw to. The caller owns the pointed view.
[in]	newthread	If true, then the editor render is done asynchronously. In that case pass nullptr for the thread.

◆ FormatNumber()

String FormatNumber	(	const GeData &	val,
		Int32	format,
		Int32	fps,
		Bool	bUnit = `true`
	)

Converts val to a string.

Parameters

[in]	val	The value to convert to a string. Must be of type Float, Int32 or BaseTime.
[in]	format	The format: FORMAT_NUMBERS
[in]	fps	The frames per second, for time values.
[in]	bUnit	If true the unit is included in the formatted string.

Returns: The formatted string.

◆ StringToNumber()

GeData StringToNumber	(	const maxon::String &	text,
		Int32	format,
		Int32	fps,
		const LENGTHUNIT *	lengthunit = `nullptr`
	)

Converts a string to a data value of type Float or Int32.

Parameters

[in]	text	The string to convert to a value.
[in]	format	The format: FORMAT_NUMBERS
[in]	fps	The frames per second, for time values.
[in]	lengthunit	Can be used to override the units conversion. By default it will use the document's units. For example a string of "50" will result in 0.5 if the document's units are Meters and the unit display setting is centimeters. If lengthunit is specified its value will be used instead of the document's units setting.

Returns: The converted value.

◆ CallCommand()

void CallCommand	(	Int32	id,
		Int32	subid = `0`
	)

Executes commands.

Parameters

[in]	id	The command ID.
[in]	subid	The sub ID. (Used for scripts.)

◆ GetCommandName()

String GetCommandName ( Int32 id )

Gets the name of a command.

Parameters

[in] id The command ID.

Returns: The command name.

◆ GetCommandHelp()

String GetCommandHelp ( Int32 id )

Gets the help string of a command.

Parameters

[in] id The ID of the command.

Returns: The help string.

◆ IsCommandEnabled()

Bool IsCommandEnabled ( Int32 id )

Checks if a command is enabled.

Parameters

[in] id The ID of the command.

Returns: true if the command is enabled, otherwise false.

◆ IsCommandChecked()

Bool IsCommandChecked ( Int32 id )

Checks if a command is checked.

Parameters

[in] id The ID of the command.

Returns: true if the command is checked, otherwise false.

◆ GetSystemEnvironmentVariable()

Bool GetSystemEnvironmentVariable	(	const maxon::String &	varname,
		maxon::String &	result
	)

Retrieves system environment variables.

Parameters

[in]	varname	The environment variable name.
[out]	result	Assigned the retrieved value, if available.

Returns: true if successful, otherwise false.

◆ AskForAdministratorPrivileges()

Bool AskForAdministratorPrivileges	(	const maxon::String &	msg,
		const maxon::String &	caption,
		Bool	allowsuperuser,
		void **	token
	)

Private.

◆ EndAdministratorPrivileges()

void EndAdministratorPrivileges ( )

Private.

◆ RestartApplication()

void RestartApplication	(	const Utf16Char *	param = `nullptr`,
		Int32	exitcode = `0`,
		const Utf16Char **	path = `nullptr`
	)

Private.

◆ SetExitCode()

void SetExitCode ( Int32 exitCode )

Sets the exit code returned by Cinema 4D when it exits.

Parameters

[in] exitCode The exit code.

◆ GeUpdateUI()

void GeUpdateUI ( )

Forces a redraw of the GUI, for example after a change of the preferences or Linear Workflow settings.

◆ GeGetActiveViewportType()

VIEWPORTTYPE GeGetActiveViewportType ( )

Returns the type of viewport that is currently active

Returns: The type of active viewport: VIEWPORTTYPE

◆ GetShortcutCount()

Int32 GetShortcutCount ( )

Retrieves the global shortcut count.

Returns: The number of shortcuts.

◆ GetShortcut()

BaseContainer GetShortcut ( Int32 index )

Retrieves the shortcut at index.

Parameters

[in] index The shortcut index: 0 <= index < GetShortcutCount()

Returns: The retrieved shortcut.

◆ AddShortcut()

Bool AddShortcut ( const BaseContainer & bc )

Adds the shortcut in bc to the shortcut list.

Parameters

[in] bc The container for the shortcut to add: SHORTCUT

Returns: true if successful, otherwise false.

◆ RemoveShortcut()

Bool RemoveShortcut ( Int32 index )

Removes the shortcut at index.

Parameters

[in] index The shortcut index: 0 <= index < GetShortcutCount()

Returns: true if successful, otherwise false.

◆ LoadShortcutSet()

Bool LoadShortcutSet	(	const Filename &	fn,
		Bool	add
	)

Loads shortcuts.

Parameters

[in]	fn	The file with the shortcuts to load.
[in]	add	true to add the shortcuts, instead of replacing.

Returns: true if successful, otherwise false.

◆ SaveShortcutSet()

Bool SaveShortcutSet ( const Filename & fn )

Save shortcuts.

Parameters

[in] fn The file to save the shortcuts to.

Returns: true if successful, otherwise false.

◆ FindShortcutsFromID()

Int32 FindShortcutsFromID	(	Int32	pluginid,
		Int32 *	indexarray,
		Int32	maxarrayelements
	)

Finds all shortcuts assigned to a command.

Parameters

[in]	pluginid	The plugin ID to search for.
[out]	indexarray	Filled with the found IDs. The caller owns the pointed array.
[in]	maxarrayelements	The size of indexarray

Returns: The number of shortcuts found.

◆ FindShortcuts()

Int32 FindShortcuts	(	const BaseContainer &	scut,
		Int32 *	idarray,
		Int32	maxarrayelements
	)

Finds all commands that are assigned to a shortcut.

Parameters

[in]	scut	The shortcut to search for.
[in]	idarray	Filled with the found IDs. The caller owns the pointed array.
[in]	maxarrayelements	The size of indexarray.

Returns: The number of shortcuts found.

◆ CheckCommandShortcut()

Bool CheckCommandShortcut	(	Int32	id,
		Int32	key,
		Int32	qual
	)

Checks if a shortcut key and qualifier are assigned to a command.

Parameters

[in]	id	The plugin ID of the command.
[in]	key	The shortcut key.
[in]	qual	The qualifier key.

Returns: true if the shortcut/qualifier is assigned, otherwise false.

◆ InsertCreateObject()

void InsertCreateObject	(	BaseDocument *	doc,
		BaseObject *	op,
		BaseObject *	activeobj = `nullptr`
	)

Adds op into document doc.
This function takes care for modifiers to add the new object at a certain place in the hierarchy.
For example if shift is pressed while a new object is created it will be inserted below the active object.

Parameters

[in]	doc	The current document.
[in]	op	The object to insert.
[in]	activeobj	The active object, or nullptr if no object is active.

◆ CopyToClipboard() [1/2]

void CopyToClipboard ( const maxon::String & text )

Copies a string to the clipboard.

Parameters

[in] text The string to copy.

◆ CopyToClipboard() [2/2]

void CopyToClipboard	(	BaseBitmap *	map,
		Int32	ownerid
	)

Copies a bitmap to the clipboard.

Parameters

[in]	map	The bitmap to copy. The caller owns the pointed bitmap.
[in]	ownerid	The owner ID: CLIPBOARDOWNER

◆ GetStringFromClipboard()

Bool GetStringFromClipboard ( String * txt )

Retrieves a string from the clipboard.

Parameters

[out] txt true if a string could be retrieved from the clipboard, otherwise false.

◆ GetBitmapFromClipboard()

Bool GetBitmapFromClipboard ( BaseBitmap * map )

Retrieves a bitmap from the clipboard.

Parameters

[out] map The bitmap to get. The caller owns the pointed bitmap.

Returns: true if a bitmap could be retrieved from the clipboard, otherwise false.

◆ GetClipboardType()

CLIPBOARDTYPE GetClipboardType ( )

Retrieves the type of the clipboard.

Returns: The type of the clipboard: CLIPBOARDTYPE

◆ GetC4DClipboardOwner()

Int32 GetC4DClipboardOwner ( )

Retrieves the owner ID of the clipboard.

Returns: The owner ID: CLIPBOARDOWNER

◆ GetCursorBitmap()

const BaseBitmap* GetCursorBitmap	(	Int32	type,
		Int32 &	hotspotx,
		Int32 &	hotspoty
	)

Private.

◆ CodeEditor_Open()

Bool CodeEditor_Open	(	BaseList2D *	obj,
		const maxon::Delegate< GeData(BaseList2D *obj, const BaseContainer &msg)> &	callback,
		const BaseContainer &	bc = `BaseContainer()`
	)

Opens the Cinema 4D code editor.

Parameters

[in]	obj	The object that the source belongs to. The caller owns the pointed object.
[in]	callback	A callback to set and retrieve the edited source code. The caller owns the pointed callback.
[in]	bc	The settings for the editor that will be opened: CODEEDITOR

Returns: true if the editor was opened, otherwise false.

◆ MinimalViewportSettingsCommand()

void MinimalViewportSettingsCommand ( Int32 type )

Private.

◆ IsAnimationRunning()

Bool IsAnimationRunning ( const BaseDocument * document )

Checks if an animation is currently running.

Parameters

[in] document The currently active document.

Returns: True, if an animation is currently running.

◆ IsUVToolMode()

Bool IsUVToolMode ( const BaseDocument * document )

Check if the current context is UV, if UV mode is selected or the UV Texture Editor is the last one used.

Parameters

[in] document The currently active document.

Returns: True if is UV mode, false otherwise.

◆ GetFormatDepth()

Int32 GetFormatDepth	(	Int32	format,
		Int32	depth
	)

Gets the format depth for a image saver and depth.

Parameters

[in]	format	The ID of the image saver.
[in]	depth	Depth.

Returns: The depth of the format (8, 16 or 32).

Variable Documentation

◆ CURRENT

CURRENT

Get Machine features for the currently active OpenGL type.

◆ HARDWARE_OGL

HARDWARE_OGL

Get Machine features for Hardware OpenGL.

◆ MAXON_ENUM_LIST

class DebugTimer MAXON_ENUM_LIST

Classes

Macros

Typedefs

Enumerations

Functions

Variables

Swap/Intel/Motorola Conversions

Background Handler

Status

Typedef Documentation

◆ TexturePathTuple

◆ TexturePathList

Function Documentation

◆ GeGetUserName()

◆ GeGetVersionType()

◆ GetGeneralLicensingInformation()

◆ ExportLicenses()

◆ AddLicenseItem()

◆ CheckLicenseFeature()

◆ HasFullFeatureSet()

◆ IsNet()

◆ IsServer()

◆ IsClient()

◆ GeShowMouse()

◆ GeGetScreenDimensions()

◆ GeGetTimer()

◆ GeGetMilliSeconds()

◆ GeGetLineEnd()

◆ GeGetDefaultFPS()

◆ GeGetCinemaInfo()

◆ GeOutString()

◆ GeGetCurrentOS()

◆ GeGetByteOrder()

◆ GeGetGray()

◆ GeChooseColor()

◆ GeChooseColorAlpha()

◆ GeOpenHTML()

◆ GeChooseFont()

◆ GeGetGuiFont()

◆ GeGetMonoFont()

◆ GeRegisterPlugin()

◆ GePrint()

◆ GeConsoleOut()

◆ GeGetMovieInfo()

◆ RenameDialog()

◆ GetC4DVersion()

◆ GeGetDegreeChar()

◆ GeGetPercentChar()

◆ lSwap()

◆ wSwap()

◆ lIntel()

◆ wIntel()

◆ lMotor()

◆ wMotor()

◆ llSwap()

◆ llIntel()

◆ llMotor()

◆ GeAddBackgroundHandler()

◆ GeRemoveBackgroundHandler()

◆ GeStopBackgroundThreads()

◆ GeCheckBackgroundThreadsRunning()

◆ SetMousePointer()

◆ ShowBitmap() [1/2]

◆ ShowBitmap() [2/2]

◆ StopAllThreads()

◆ StopDrawViewsThread()

◆ ShutdownThreads()

◆ StatusClear()

◆ StatusSetSpin()

◆ StatusSetBar()

◆ StatusSetText()

◆ StatusNetClear()

◆ StatusSetNetLoad()

◆ StatusSetNetBar()

◆ StatusSetNetText()

◆ SpecialEventAdd()

◆ EventAdd()

◆ GeSyncMessage()

◆ DrawViews()

◆ SendModelingCommand()