c4d.utils.ViewportSelect¶

class c4d.utils.ViewportSelect¶

Methods Signatures

ViewportSelect.__init__(self)

rtype: c4d.utils.ViewportSelect

`ViewportSelect.Init(self, w, h, bd, ops, ...)`	Initializes the viewport information for multiple objects. This has to be done before the pixel information can be retrieved. You have to retrieve the width and height of the viewport manually:
`ViewportSelect.GetPixelInfoPoint(self, x, y)`	Retrieves point information at the pixel position (x, y):
`ViewportSelect.GetPixelInfoPolygon(self, x, y)`	Retrieves polygon information at the pixel position (x, y):
`ViewportSelect.GetPixelInfoEdge(self, x, y)`	Retrieves edge information at the pixel position (x, y):
`ViewportSelect.GetNearestPoint(self, op, x, y[, ...])`	Retrieves nearest point information at the pixel position (x, y).
`ViewportSelect.GetNearestPolygon(self, op, x, y[, ...])`	Retrieves nearest polygon information at the pixel position (x, y).
`ViewportSelect.GetNearestEdge(self, op, x, y[, ...])`	Retrieves nearest edge information at the pixel position (x, y).
`ViewportSelect.DrawPolygon(self, p, i, op[, ...])`	Draws a polygon into the internal pixel structure, so that pixels inside the polygon will be associated with i and op in the viewport pixel retrieved.
`ViewportSelect.DrawHandle(self, p, i, op[, ...])`	Draws a handle into the internal pixel structure, so that pixels inside the handle will be associated with i and op in the viewport pixel retrieved.
`ViewportSelect.ShowHotspot(self, bw, x, y)`	Draws an XOR circle to the view bw at the pixel position (x, y). The radius is set by `SetBrushRadius()`.
`ViewportSelect.SetBrushRadius(self, r)`	Sets the radius for `ShowHotspot()`.
`ViewportSelect.ClearPixelInfo(self, x, y, mask)`	Deletes the pixel information at (x, y) according to mask.
`ViewportSelect.GetCameraCoordinates(self, x, y, z)`	Converts the pixel position (x, y, z) to camera coordinates.
`ViewportSelect.PickObject(self, bd, doc, x, y, ...)`	Pick objects.

Methods Documentation

ViewportSelect.__init__(self)¶

Return type: c4d.utils.ViewportSelect
Returns: A new viewport select object.

ViewportSelect.Init(self, w, h, bd, ops, mode, onlyvisible, flags)¶

Initializes the viewport information for multiple objects. This has to be done before the pixel information can be retrieved. You have to retrieve the width and height of the viewport manually:

import c4d
# Retrieves the active BaseDraw. Use the one passed as argument if you can.
bd = doc.GetActiveBaseDraw()
# Retrieves the frame information
frame = bd.GetFrame()

left = frame["cl"]
right = frame["cr"]
top = frame["ct"]
bottom = frame["cb"]
# Calculates the width and height of the screen
width = right - left + 1
height = bottom - top + 1

# Creates a new ViewportSelect
vpSelect = c4d.utils.ViewportSelect()
# Initialise the ViewportSelect with a list of object
vpSelect.Init(width, height, bd, [op], c4d.Mpolyedgepoint, True, c4d.VIEWPORTSELECTFLAGS_IGNORE_HIDDEN_SEL)

Parameters

w (int) – Width of the viewport in pixels.
h (int) – Height of the viewport in pixels.
bd (c4d.BaseDraw) – The viewport base draw.
ops (list of BaseObject) – A list with objects to get the information for.

mode (int) –

Editor mode:

Mpoints	Point edit mode.
Medges	Edge edit mode.
Mpolygons	Polygon edit mode.
Mpolyedgepoint	Combined poly/edge/point mode. Must only be used in `ViewportSelect`.
Medgepoint	Combined edge/point mode. Must only be used in `ViewportSelect`.

onlyvisible (bool) – If this is True only visible elements are included.

flags (int) –

Flags:

VIEWPORTSELECTFLAGS_NONE	None.
VIEWPORTSELECTFLAGS_USE_HN	Use HyperNURBS.
VIEWPORTSELECTFLAGS_USE_DEFORMERS	Use deformers.
VIEWPORTSELECTFLAGS_REGION_SELECT	A rectangle, polygon and lasso selection counts the number of vertices of a polygon within its area. Usually hidden vertices are not taken into account. This flag allows hidden vertices to be taken into account, otherwise it would not be possible to select polygons if for example all points are hidden.
VIEWPORTSELECTFLAGS_IGNORE_HIDDEN_SEL	Ignore hidden selection.
VIEWPORTSELECTFLAGS_USE_DISPLAY_MODE	If this flag is set and the display mode is Wireframe or Isoparms only edges and vertices are written into the `ViewportSelect` buffer. The `ViewportSelect` mode must be Mpolyedgepoint.
VIEWPORTSELECTFLAGS_FORCE_USE_DEFORMERS	Use deformers even when the viewport DISPLAYEDITSTATE_DEFORM is disabled.

Returns

True if successful, otherwise False.

ViewportSelect.GetPixelInfoPoint(self, x, y)¶

Retrieves point information at the pixel position (x, y):

import c4d
# Creates a new ViewportSelect
vpSelect = c4d.utils.ViewportSelect()
# Initialise the ViewportSelect with a list of object
vpSelect.Init(width, height, bd, [op], c4d.Mpolyedgepoint, True, c4d.VIEWPORTSELECTFLAGS_IGNORE_HIDDEN_SEL)
# Gives a Sample point
xPos, yPos = 100, 100

# Retrieves the information with GetPixelInfoPoint
infoPoint = vpSelect.GetPixelInfoPoint(xPos, yPos)

if not infoPoint:
    return

i = infoPoint["i"]  # int
op = infoPoint["op"]  # c4d.BaseObject
z = infoPoint["z"]  # float

Parameters

x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init().
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where h is the height given to Init().

Return type

dict{i: int, op: BaseObject, z: float}

i	int	Element index. The index depends on the element type:
		point	point index
		polygon	polygon index
		edge	4*polygon + edge index
		spline	point segment offset + point index
op	`BaseObject`	Object.
z	float	Z coordinate of the current element.

Returns

The retrieved pixel information or None if no information could be retrieved.

ViewportSelect.GetPixelInfoPolygon(self, x, y)¶

Retrieves polygon information at the pixel position (x, y):

import c4d
# Creates a new ViewportSelect
vpSelect = c4d.utils.ViewportSelect()
# Initialise the ViewportSelect with a list of object
vpSelect.Init(width, height, bd, [op], c4d.Mpolyedgepoint, True, c4d.VIEWPORTSELECTFLAGS_IGNORE_HIDDEN_SEL)
# Gives a Sample point
xPos, yPos = 100, 100

# Retrieves the information with GetPixelInfoPolygon
infopolygon = vpSelect.GetPixelInfoPolygon(xPos, yPos)

if not infopolygon:
    return

i = infopolygon["i"]  # int
op = infopolygon["op"]  # c4d.BaseObject
z = infopolygon["z"]  # float

Parameters

x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init().
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where h is the height given to Init().

Return type

dict{i: int, op: BaseObject, z: float}

i	int	Element index. The index depends on the element type:
		point	point index
		polygon	polygon index
		edge	4*polygon + edge index
		spline	point segment offset + point index
op	`BaseObject`	Object.
z	float	Z coordinate of the current element.

Returns

The retrieved pixel information or None if no information could be retrieved.

ViewportSelect.GetPixelInfoEdge(self, x, y)¶

Retrieves edge information at the pixel position (x, y):

import c4d
# Creates a new ViewportSelect
vpSelect = c4d.utils.ViewportSelect()
# Initialise the ViewportSelect with a list of object
vpSelect.Init(width, height, bd, [op], c4d.Mpolyedgepoint, True, c4d.VIEWPORTSELECTFLAGS_IGNORE_HIDDEN_SEL)
# Gives a Sample point
xPos, yPos = 100, 100

# Retrieves the information with GetPixelInfoEdge
infoEdge = vpSelect.GetPixelInfoEdge(xPos, yPos)

if not infoEdge:
    return

i = infoEdge["i"]  # int
op = infoEdge["op"]  # c4dBaseObject
z = infoEdge["z"]  # float

Parameters

x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init().
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where h is the height given to Init().

Return type

dict{i: int, op: BaseObject, z: float}

i	int	Element index. The index depends on the element type:
		point	point index
		polygon	polygon index
		edge	4*polygon + edge index
		spline	point segment offset + point index
op	`BaseObject`	Object.
z	float	Z coordinate of the current element.

Returns

The retrieved pixel information or None if no information could be retrieved.

ViewportSelect.GetNearestPoint(self, op, x, y, maxrad=MAXLONGl, onlyselected=False, ignorelist=None, ignorecnt=0)¶

Retrieves nearest point information at the pixel position (x, y).

Parameters

op (c4d.BaseObject) – The object to search for the closest element.
x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init(). If an element was found the reference is updated to reflect the X coordinate of the nearest point.
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where h is the height given to Init(). If an element was found the reference is updated to reflect the Y coordinate of the nearest point.
maxrad (int) – A maximal radius for the search in pixels.
onlyselected (bool) – If this is True only selected elements are included in the search.
ignorelist (list) – List of points to ignore.
ignorecnt (int) – Ignore list count.

Return type

dict{i: int, op: BaseObject, z: float, x: float, y: float}

i	int	Element index. The index depends on the element type:
		point	point index
		polygon	polygon index
		edge	4*polygon + edge index
		spline	point segment offset + point index
op	`BaseObject`	Object.
z	float	Z coordinate of the current element.
x	float	X pixel position.
y	float	Y pixel position.

Returns

The retrieved pixel information or None if no information could be retrieved.

ViewportSelect.GetNearestPolygon(self, op, x, y, maxrad=MAXLONGl, onlyselected=False, ignorelist=None, ignorecnt=0)¶

Retrieves nearest polygon information at the pixel position (x, y).

Parameters

op (c4d.BaseObject) – The object to search for the closest element.
x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init(). If an element was found the reference is updated to reflect the X coordinate of the nearest point.
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where h is the height given to Init(). If an element was found the reference is updated to reflect the Y coordinate of the nearest point.
maxrad (int) – A maximal radius for the search in pixels.
onlyselected (bool) – If this is True only selected elements are included in the search.
ignorelist (list) – List of points to ignore.
ignorecnt (int) – Ignore list count.

Return type

dict{i: int, op: BaseObject, z: float, x: float, y: float}

i	int	Element index. The index depends on the element type:
		point	point index
		polygon	polygon index
		edge	4*polygon + edge index
		spline	point segment offset + point index
op	`BaseObject`	Object.
z	float	Z coordinate of the current element.
x	float	X pixel position.
y	float	Y pixel position.

Returns

The retrieved pixel information or None if no information could be retrieved.

ViewportSelect.GetNearestEdge(self, op, x, y, maxrad=MAXLONGl, onlyselected=False, ignorelist=None, ignorecnt=0)¶

Retrieves nearest edge information at the pixel position (x, y).

Parameters

op (c4d.BaseObject) – The object to search for the closest element.
x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init(). If an element was found the reference is updated to reflect the X coordinate of the nearest point.
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where y is the width given to Init(). If an element was found the reference is updated to reflect the Y coordinate of the nearest point.
maxrad (int) – A maximal radius for the search in pixels.
onlyselected (bool) – If this is True only selected elements are included in the search.
ignorelist (list) – List of points to ignore.
ignorecnt (int) – Ignore list count.

Return type

dict{i: int, op: BaseObject, z: float, x: float, y: float}

i	int	Element index. The index depends on the element type:
		point	point index
		polygon	polygon index
		edge	4*polygon + edge index
		spline	point segment offset + point index
op	`BaseObject`	Object.
z	float	Z coordinate of the current element.
x	float	X pixel position.
y	float	Y pixel position.

Returns

The retrieved pixel information or None if no information could be retrieved.

ViewportSelect.DrawPolygon(self, p, i, op, onlyvisible=- 1)¶

Draws a polygon into the internal pixel structure, so that pixels inside the polygon will be associated with i and op in the viewport pixel retrieved.

Parameters

p (array (Vector)) –
An array of points that make up the polygon.

Note

All coordinates are in screen space.
i (int) – The polygon index to associate with this polygon.
op (c4d.BaseObject) – The object to associate with this polygon.
onlyvisible (int) – If this is True, only visible parts of the polygon are drawn.

Return type

bool

Returns

True if successful, otherwise False.

ViewportSelect.DrawHandle(self, p, i, op, onlyvisible=- 1)¶

Draws a handle into the internal pixel structure, so that pixels inside the handle will be associated with i and op in the viewport pixel retrieved.

Parameters

p (c4d.Vector) –
The position of the handle.

Note

All coordinates are in screen space.
i (int) – The polygon index to associate with this polygon.
op (c4d.BaseObject) – The object to associate with this polygon.
onlyvisible (int) – If this is True, only visible parts of the handle are drawn.

Return type

bool

Returns

True if successful, otherwise False.

ViewportSelect.ShowHotspot(self, bw, x, y)¶

Draws an XOR circle to the view bw at the pixel position (x, y). The radius is set by SetBrushRadius().

Parameters

bw (c4d.gui.EditorWindow) – The editor window to draw to.
x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init().
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where h is the height given to Init().

ViewportSelect.SetBrushRadius(self, r)¶

Sets the radius for ShowHotspot().

Parameters: r (float) – The new radius in pixels.

ViewportSelect.ClearPixelInfo(self, x, y, mask)¶

Deletes the pixel information at (x, y) according to mask.

This is used for example in the live edge selection with “tolerant” deactivated to find out how many pixels of a certain edge was selected. If an edge is determined under the cursor, the pixel counter is decremented and the edge information is deleted afterwards.

Parameters

x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init().
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where h is the height given to Init().
mask (int) –
A bitfield of what to clear:

VIEWPORT_CLEAR_POINT

Clear points.

VIEWPORT_CLEAR_POLYGON

Clear polygons.

VIEWPORT_CLEAR_EDGE

Clear edges.

ViewportSelect.GetCameraCoordinates(self, x, y, z)¶

Converts the pixel position (x, y, z) to camera coordinates.

Parameters

x (float) – An X coordinate within the viewport.
y (float) – An Y coordinate within the viewport.
z (float) – A Z coordinate.

Return type

c4d.Vector

Returns

The calculated camera coordinate.

ViewportSelect.PickObject(self, bd, doc, x, y, rad, flags)¶

Pick objects.

Parameters

bd (c4d.BaseDraw) – The viewport base draw.
doc (c4d.documents.BaseDocument) – Document.
x (int) – An X coordinate within the viewport. Must be 0 <= x < w, where w is the width given to Init().
y (int) – An Y coordinate within the viewport. Must be 0 <= y < h, where h is the height given to Init().
rad (int) – A radius for the search in pixels.

flags (int) –

Flags:

Symbol ID	Description
VIEWPORT_PICK_FLAGS_NONE	None.
VIEWPORT_PICK_FLAGS_ALLOW_OGL	Allow OpenGL.
VIEWPORT_PICK_FLAGS_DONT_STOP_THREADS	Do not stop threads.
VIEWPORT_PICK_FLAGS_USE_SEL_FILTER	Use selection filter.
VIEWPORT_PICK_FLAGS_OGL_ONLY_TOPMOST	Picks only topmost object. Use this only when the object pointer is not needed. Only works with OpenGL.
VIEWPORT_PICK_FLAGS_OGL_ONLY_VISIBLE	Picks only visible. Only works with OpenGL. Note Not supported by Python API.
VIEWPORT_PICK_FLAGS_OGL_IGNORE_Z	Picks ignore Z position. Set this to only check if an object (and which) was hit, not its Z position. Only works with OpenGL.
VIEWPORT_PICK_FLAGS_OGL_ONLY_TOPMOST_WITH_OBJ	Picks only topmost object but returns the topmost object with its Z position. Only works with OpenGL.
VIEWPORT_PICK_FLAGS_NO_DEPTH_CORRECTION	To support old tools, the matrix is usually corrected so that the depth can be in the [-1, 1] range. With this option set, this does not happen any more. New in version R23.105.

Return type

list[BaseObject]

Returns

Object list or None on failure.

VIEWPORT_CLEAR_POINT	Clear points.
VIEWPORT_CLEAR_POLYGON	Clear polygons.
VIEWPORT_CLEAR_EDGE	Clear edges.