c4d.plugins.SculptBrushToolData

class c4d.plugins.SculptBrushToolData

A data class for creating sculpt brushes.

New in version R16.021.

See also

The SculptBrushToolData plugin examples: Py-SculptGrabBrush, Py-SculptPaintBrush, Py-SculptPullBrush and Py-SculptTwistBrush

Methods Signatures

SculptBrushToolData.InitTool(self, doc, data, bt)

Called each time the tool is selected.

SculptBrushToolData.FreeTool(self, doc, data)

Called each time the user chooses another tool.

SculptBrushToolData.DoCommand(self, mode, arr, bc, ...)

Called by SendModelingCommand() to perform a command.

SculptBrushToolData.InitDefaultSettings(self, doc, data)

Called to let initialize the default tool settings in data.

SculptBrushToolData.KeyboardInput(self, doc, data, bd, ...)

Called when the user types something in any of the editor views.

SculptBrushToolData.MouseInput(self, doc, data, bd, ...)

Called when the user clicks with the mouse in any of the editor views.

SculptBrushToolData.GetState(self, doc)

Called to check if the tool should be enabled, checked or not.

SculptBrushToolData.GetCursorInfo(self, doc, data, bd, x, ...)

Called when the cursor is over the editor window to get the state of the mouse pointer.

SculptBrushToolData.Draw(self, doc, data, bd, ...)

Called when the editor view is updated so you can display graphics for your tool in the view.

SculptBrushToolData.AllocSubDialog(self, bc)

Called to get a GUI for the Active Tool window. Return an instance of your tool’s dialog.

SculptBrushToolData.Message(self, doc, data, type, ...)

Called when the tool receives messages.

SculptBrushToolData.GetToolPluginId(self)

Return the unique id for the tool plugin as obtained from www.plugincafe.com.

SculptBrushToolData.GetResourceSymbol(self)

Return the name of the resource file for this brush.

SculptBrushToolData.StartStroke(self, strokeCount, data)
StartStroke() is called once at the start of the stroke. It passes the total number of instances of the brush that will be drawn.

SculptBrushToolData.StartStrokeInstance(self, strokeInstanceID)
Called after StartStroke(). Called once for each brush instance at the start of a stroke.

SculptBrushToolData.StartSymmetry(self)
Called directly before each individual brush instance is about to be handled.

SculptBrushToolData.StartStrokeInstanceDabs(self, strokeInstanceID)
Called before all the dabs for a single instance are about to be drawn.

SculptBrushToolData.StartDab(self, strokeInstanceID)
Called before the ApplyDab() override is called which will then process the dab.

SculptBrushToolData.EndDab(self, strokeInstanceID)

Called after ApplyDab() function.

SculptBrushToolData.EndStrokeInstanceDabs(self, strokeInstanceID)

Called after all the dabs have been drawn for a single instance of the brush.

SculptBrushToolData.EndSymmetry(self)

Called after all the dabs for all the instances have been drawn for a single mouse movement on screen.

SculptBrushToolData.EndStrokeInstance(self, strokeInstanceID)
Called on mouse up after a brush stroke. This method is called once for each instance.

SculptBrushToolData.EndStroke(self)

Called on mouse up after EndStrokeInstance() has been called for each instance.

SculptBrushToolData.MouseData(self, strokeInstanceID, ...)

Constantly receives data about the object underneath the mouse. This method will get called when you move the cursor over an object on screen and happens when the mouse button is up or down.

SculptBrushToolData.OverwriteLoadedPresetSettings(self, data)

After a preset has been loaded this method will get called to allow the brush to disable or change any of the loaded settings if required.

SculptBrushToolData.PostInitDefaultSettings(self, doc, data)
When a brush is reset by the user, in the UI, then it sets it back to its defaults.

SculptBrushToolData.GetEnabling(self, id)

Called internally by the sculpting system to check if an UI element is enabled or not.

SculptBrushToolData.HandleFillTool(self, doc, data, bd, ...)

Private.

SculptBrushToolData.HandleNonModelPickMode(self, doc, data, bd, ...)

Private. Do something special when the first mouse click is not on the model.

SculptBrushToolData.DrawNonModelPickMode(self, doc, data, bd, ...)

Private.

SculptBrushToolData.HasDrawMode(self, mode)
Override to let the system know what draw modes the brush supports.

SculptBrushToolData.ApplyDab(self, dab)

Called to modify the sculpt object. Implement the functionality of your brush here!

Inheritance

Parent Class:

Methods Documentation

SculptBrushToolData.InitTool(self, doc, data, bt)

Called each time the tool is selected.

Parameters
Return type

bool

Returns

True if there was no error, otherwise False.

SculptBrushToolData.FreeTool(self, doc, data)

Called each time the user chooses another tool.

Parameters
Return type

bool

Returns

True if there was no error, otherwise False.

SculptBrushToolData.DoCommand(self, mode, arr, bc, doc, flags)

Called by SendModelingCommand() to perform a command.

Parameters

  • mode (int) –

    The modeling mode:

    MODELINGCOMMANDMODE_ALL

    All points/polygons.

    MODELINGCOMMANDMODE_POINTSELECTION

    Only the current point selection.

    MODELINGCOMMANDMODE_POLYGONSELECTION

    Only the current polygon selection.

    MODELINGCOMMANDMODE_EDGESELECTION

    Only the current edge selection.

  • arr (list of BaseList2D) – The input objects.

  • bc (c4d.BaseContainer) – The modeling command settings container.

  • doc (c4d.documents.BaseDocument) – The document for the operation.

  • flags (int) –

    The flags:

    MODELINGCOMMANDFLAGS_NONE

    None.

    MODELINGCOMMANDFLAGS_CREATEUNDO

    Creates undo and inserts newly created objects into the passed document, instead of returning result.

SculptBrushToolData.InitDefaultSettings(self, doc, data)

Called to let initialize the default tool settings in data.

Parameters
SculptBrushToolData.KeyboardInput(self, doc, data, bd, win, msg)

Called when the user types something in any of the editor views.

Parameters
Return type

bool

Returns

False if a problem occured.

SculptBrushToolData.MouseInput(self, doc, data, bd, win, msg)

Called when the user clicks with the mouse in any of the editor views.

Parameters
Return type

bool

Returns

False if a problem occured.

SculptBrushToolData.GetState(self, doc)

Called to check if the tool should be enabled, checked or not.

Parameters

doc (c4d.documents.BaseDocument) – The document the tool is being used in.

Return type

int

Returns

The return flags:

CMD_ENABLED

Enabled.

CMD_VALUE

Checked.

SculptBrushToolData.GetCursorInfo(self, doc, data, bd, x, y, bc)

Called when the cursor is over the editor window to get the state of the mouse pointer.

The bubble help and cursor can be set using.

bc.SetString(c4d.RESULT_BUBBLEHELP, "My Tools Help")
bc.SetLong(c4d.RESULT_CURSOR, c4d.MOUSE_POINT_HAND)
Parameters

  • doc (c4d.documents.BaseDocument) – The currently active document.

  • data (c4d.BaseContainer) – The tool settings container.

  • bd (c4d.BaseDraw) – The BaseDraw object for the active editor view.

  • x (float) – The x coordinate of the mouse cursor relative to the top-left of the currently active editor view.

  • y (float) – The y coordinate of the mouse cursor relative to the top-left of the currently active editor view.

  • bc (c4d.BaseContainer) –

    The container to store the result in. Use the following container IDs:

    RESULT_BUBBLEHELP_TITLE

    str

    Bubble help text title. Printed in bold for the bubble help, not visible in the status bar.

    RESULT_BUBBLEHELP

    str

    Bubble text help.

    RESULT_CURSOR

    int

    Mouse cursor: MOUSE.

Return type

bool

Returns

False if a problem occured.

SculptBrushToolData.Draw(self, doc, data, bd, bh, bt, flags)

Called when the editor view is updated so you can display graphics for your tool in the view.

Parameters

  • doc (c4d.documents.BaseDocument) – The currently active document.

  • data (c4d.BaseContainer) – The tool settings container.

  • bd (c4d.BaseDraw) – The BaseDraw object for the active editor view.

  • bh (c4d.plugins.BaseDrawHelp) – The BaseDrawHelp object for the active editor view.

  • bt (c4d.threading.BaseThread) – The thread this method is being called from.

  • flags (int) –

    The flags are:

    TOOLDRAWFLAGS_NONE

    None.

    TOOLDRAWFLAGS_INVERSE_Z
    Inverse Z-buffer mode. If set, the drawing engine of Cinema 4D will only draw elements if they are further away from the camera than other objects.
    This is mostly used for help lines (such as the semi-transparent axis inside of objects). .. note:: This mode only works when all objects are drawn so it should be passed last.

    TOOLDRAWFLAGS_HIGHLIGHT

    Highlight mode.

Return type

int

Returns

The values for this are:

TOOLDRAW_NONE

None.

TOOLDRAW_HANDLES

The active objects handles will be drawn.

TOOLDRAW_AXIS

The active objects axes will be drawn.

TOOLDRAW_HIGHLIGHTS

The highlights will be drawn.

SculptBrushToolData.AllocSubDialog(self, bc)

Called to get a GUI for the Active Tool window. Return an instance of your tool’s dialog.

Parameters

bc (c4d.BaseContainer) – Currently not used.

Return type

c4d.gui.SubDialog

Returns

The allocated subdialog.

SculptBrushToolData.Message(self, doc, data, type, t_data)

Called when the tool receives messages.

See also

MSG for the information on the messages type, data and input/output.

Parameters
Return type

bool

Returns

Depends on the message type.

SculptBrushToolData.GetToolPluginId(self)

Return the unique id for the tool plugin as obtained from www.plugincafe.com.

Return type

int

Returns

The tool plugin ID.

SculptBrushToolData.GetResourceSymbol(self)

Return the name of the resource file for this brush.

Return type

str

Returns

The name of the resource file for this brush.

SculptBrushToolData.StartStroke(self, strokeCount, data)
StartStroke() is called once at the start of the stroke. It passes the total number of instances of the brush that will be drawn.
The number of instances will change depending on the symmetry mirroring and radial settings.

Use this method to setup any data on your brush that you might want to access from within your ApplyDab() override via BrushDabData.GetBrush().

Calling order for brush stroke methods:

  • StartStroke(): Called once at the start of the stroke.

  • StartStrokeInstance(): Call for each instance of a stroke that will be used. Use this to initialize any data you might need for the duration of the entire brush stroke.

  • StartSymmetry(): Called once before all the instances are about to be drawn for a small mouse movement. This will be called MANY times during a stroke as the mouse moves over the model.

  • StartStrokeInstanceDabs(): Called once before a bunch of consecutive dabs will be draw for a single instance (mirrored brush).

  • StartDab(): Called for each dab that needs to be drawn between 2 mouse locations on the object for a single brush stroke instance.

  • ApplyDab() gets called to process the dab.

  • EndDab()

  • EndStrokeInstanceDabs()

  • EndSymmetry(): Called once when all symmetrical strokes have finished.

  • EndStrokeInstance(): Called for each instance of a stroke that was used.

  • EndStroke()

Note

StartStroke() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

Parameters

  • strokeCount (int) – The number of instances of the brush that will be drawn.

  • data (c4d.BaseContainer) – The data for the brush.

SculptBrushToolData.StartStrokeInstance(self, strokeInstanceID)
Called after StartStroke(). Called once for each brush instance at the start of a stroke.
The number of instances will change depending on the symmetry mirroring and radial settings.

Use this method to allocate any data you may want to access during a brush stroke, that may be specific for each individual instance.
Setup here any data on your brush that you might want to access from within your ApplyDab() override via BrushDabData.GetBrush().

Note

StartStrokeInstance() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

Parameters

strokeInstanceID (int) – The ID of the brush instance being drawn.

SculptBrushToolData.StartSymmetry(self)
Called directly before each individual brush instance is about to be handled.
Between this method and EndSymmetry() all the dabs for each instance will be drawn from one mouse location on the surface of the model to another.
This method will be called every time the user moves its mouse over the object on the screen to indicate that a new batch of dabs is going to be drawn.

Use this method to setup any data on your brush that you might want to access from within your ApplyDab() override via BrushDabData.GetBrush().

Note

StartSymmetry() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

SculptBrushToolData.StartStrokeInstanceDabs(self, strokeInstanceID)
Called before all the dabs for a single instance are about to be drawn.
After this call all the dabs for just one instance of the brush on the surface will interpolate between the 2 mouse locations on the object then draw all the dabs for that instance.

Use this method to setup any data on your brush that you might want to access from within your ApplyDab() override via BrushDabData.GetBrush().

Note

StartStrokeInstanceDabs() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

Parameters

strokeInstanceID (int) – The ID of the brush instance being drawn.

SculptBrushToolData.StartDab(self, strokeInstanceID)
Called before the ApplyDab() override is called which will then process the dab.

Use this method to setup any data on your brush that you might want to access from within your ApplyDab() override via BrushDabData.GetBrush().

Note

StartDab() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

Parameters

strokeInstanceID (int) – The ID of the brush instance being drawn.

SculptBrushToolData.EndDab(self, strokeInstanceID)

Called after ApplyDab() function.

Note

EndDab() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

Parameters

strokeInstanceID (int) – The ID of the brush instance being drawn.

SculptBrushToolData.EndStrokeInstanceDabs(self, strokeInstanceID)

Called after all the dabs have been drawn for a single instance of the brush.

Note

EndStrokeInstanceDabs() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

Parameters

strokeInstanceID (int) – The ID of the brush instance being drawn.

SculptBrushToolData.EndSymmetry(self)

Called after all the dabs for all the instances have been drawn for a single mouse movement on screen.

Note

EndSymmetry() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

SculptBrushToolData.EndStrokeInstance(self, strokeInstanceID)
Called on mouse up after a brush stroke. This method is called once for each instance.
Use this method to delete any temporary data you may have allocated in your StartStrokeInstance() override.

Note

EndStrokeInstance() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

Parameters

strokeInstanceID (int) – The ID of the brush instance being drawn.

SculptBrushToolData.EndStroke(self)

Called on mouse up after EndStrokeInstance() has been called for each instance.

Note

EndStroke() will only be called if SculptBrushParams.EnableBrushAccess() has been set to True.

SculptBrushToolData.MouseData(self, strokeInstanceID, brushData, md)

Constantly receives data about the object underneath the mouse. This method will get called when you move the cursor over an object on screen and happens when the mouse button is up or down.

New in version R17.048.

Note

MouseData() will only be called if SculptBrushParams.EnableMouseData() has been set to True.

Parameters

  • strokeInstanceID (int) – The ID of the brush instance being drawn.

  • brushData (c4d.BaseContainer) – The BaseContainer data for the brush.

  • md (dict) –

    The mouse data information for the current position of the mouse on the surface of the object:

    • ”pObject”: SculptObject The selected Object underneath the mouse.

    • ”mouseCoord”: Vector The screen coordinates for the mouse location in the current viewport.

    • ”hitPoint”: Vector The hitpoint on the surface of the model at the center of the brush dab.

    • ”normal”: Vector The normal on the surface of the model at the center of the brush dab.

    • ”barryCoord”: Vector The barycentric coordinates within the triangle for the hit polygon.

    • ”polygon”: int The Index of the hit polygon.

    • ”mouseDrag”: True if the mouse button is held down and being dragged in the viewport.

    • ”distance”: The distance from the mouse in local space to the surface of the object.

    • ”isBackface”: True if the polygon under the mouse is backfacing.

SculptBrushToolData.OverwriteLoadedPresetSettings(self, data)

After a preset has been loaded this method will get called to allow the brush to disable or change any of the loaded settings if required.

Parameters

data (c4d.BaseContainer) – The settings for the loaded brush.

SculptBrushToolData.PostInitDefaultSettings(self, doc, data)
When a brush is reset by the user, in the UI, then it sets it back to its defaults.
Afterwards this method is called so you can overwrite any of the standard brush settings with your own for this brush.
Parameters
SculptBrushToolData.GetEnabling(self, id)

Called internally by the sculpting system to check if an UI element is enabled or not.

If this method is overridden then make sure to also check the return value of this method directly by calling SculptBrushToolData.GetEnabling(id) at the end.

Parameters

id (int) – The id of the UI element from the .res file.

Return type

bool

Returns

True if the element should be enabled, otherwise False.

SculptBrushToolData.HandleFillTool(self, doc, data, bd, win, msg)

Private.

Parameters
Return type

bool

Returns

True if successful, otherwise False.

SculptBrushToolData.HandleNonModelPickMode(self, doc, data, bd, win, msg)

Private. Do something special when the first mouse click is not on the model.

Parameters
Return type

bool

Returns

True if handled, otherwise False. In the case where you wish to only handle the mouse click and not the mouse drag it can return False.

SculptBrushToolData.DrawNonModelPickMode(self, doc, data, bd, bh, bt, flags)

Private.

Parameters

  • doc (c4d.documents.BaseDocument) – The current document.

  • data (c4d.BaseContainer) – The brush data.

  • bd (c4d.BaseDraw) – The editor view the tool is being used in.

  • bh (c4d.plugins.BaseDrawHelp) – The BaseDrawHelp object for the active editor view.

  • bt (c4d.threading.BaseThread) – The thread this method is being called from.

  • flags (int) –

    The flags:

    TOOLDRAWFLAGS_NONE

    None.

    TOOLDRAWFLAGS_INVERSE_Z
    Inverse Z-buffer mode. If set, the drawing engine of Cinema 4D will only draw elements if they are further away from the camera than other objects.
    This is mostly used for help lines (such as the semi-transparent axis inside of objects). .. note:: This mode only works when all objects are drawn so it should be passed last.

    TOOLDRAWFLAGS_HIGHLIGHT

    Highlight mode.

Return type

bool

Returns

True if successful, otherwise False.

SculptBrushToolData.HasDrawMode(self, mode)
Override to let the system know what draw modes the brush supports.
The system will call this method to check if a draw mode is supported by this brush. If the brush supports all the draw modes then it can just return True.
Otherwise you can specify which draw modes should be enabled by checking each of them.
Parameters

mode (int) – The ID for the DrawMode. For example MDATA_SCULPTBRUSH_SETTINGS_DRAWMODE_LINE.

Return type

bool

Returns

True if the draw mode is supported, otherwise False.

SculptBrushToolData.ApplyDab(self, dab)

Called to modify the sculpt object. Implement the functionality of your brush here!

Parameters

dab (c4d.modules.sculpting.BrushDabData) – The brush dab data.